What did you use your Sak on today?
-
That’s a good tip!

Had to google to understand...A simple and inexpensive way to remove rust from and polish chrome surfaces by hand is to rub it with aluminum foil dipped in salt water. This process yields two advantages. First, since the aluminum foil is softer than steel, it will not scratch the surface. And second, a by-product of the process produces a fine metal polishing compound that smoothes the chrome surface to a bright shine.
How Does this Work?
Rust is basically oxidized metal. As heat is generated by the friction of rubbing the aluminum foil on the chrome, a portion of the aluminum will also oxidize to produce aluminum oxide. Aluminum has a higher reduction potential (a tendency take on electrons and in the process reduce or break itself down) than the chrome, and will therefore leech oxygen atoms away from any rust on the chrome surface, which changes the chemical properties of the rust and breaks it down -
@Max Stone said:
That’s a good tip!
Had to google to understand...A simple and inexpensive way to remove rust from and polish chrome surfaces by hand is to rub it with aluminum foil dipped in salt water. This process yields two advantages. First, since the aluminum foil is softer than steel, it will not scratch the surface. And second, a by-product of the process produces a fine metal polishing compound that smoothes the chrome surface to a bright shine.
How Does this Work?
Rust is basically oxidized metal. As heat is generated by the friction of rubbing the aluminum foil on the chrome, a portion of the aluminum will also oxidize to produce aluminum oxide. Aluminum has a higher reduction potential (a tendency take on electrons and in the process reduce or break itself down) than the chrome, and will therefore leech oxygen atoms away from any rust on the chrome surface, which changes the chemical properties of the rust and breaks it downGreat explanation Max, thanks!


Sent from my SM-T387V using Tapatalk
-
Just gave the left hand a manicure, now time for the right,,
JR -
@Max Stone said:
That’s a good tip!
Had to google to understand...A simple and inexpensive way to remove rust from and polish chrome surfaces by hand is to rub it with aluminum foil dipped in salt water. This process yields two advantages. First, since the aluminum foil is softer than steel, it will not scratch the surface. And second, a by-product of the process produces a fine metal polishing compound that smoothes the chrome surface to a bright shine.
How Does this Work?
Rust is basically oxidized metal. As heat is generated by the friction of rubbing the aluminum foil on the chrome, a portion of the aluminum will also oxidize to produce aluminum oxide. Aluminum has a higher reduction potential (a tendency take on electrons and in the process reduce or break itself down) than the chrome, and will therefore leech oxygen atoms away from any rust on the chrome surface, which changes the chemical properties of the rust and breaks it down
-
thanks 11Blade!

-
I used my Outrider to carve the pumpkin.

-
I lost the small spacer in the cap of my Fisher bullet pen a couple of days ago and finally got tired of wiping off ink blobs so I used my Champion Plus to fashion a makeshift one to replace it. First I used the pen cap to punch a plug out of a pink eraser then I used the Champion's awl to bore a hole through the plug for the tip and finally I used the small blade to cut and shave the new spacer to fit. Tamping the spacer in was accomplished with the pen body and the fish scaler. Time will tell if it keeps working but no new blobs so far.
-
Had the Farmer X on range duty today

Used the inline awl to clear some 22LR catridges that failed to extract... works well for this. The main screw driver removed some bad paper target staples on the plywood. The main blade cut the label tape to open a fresh box of CCI Velocitors.
Gets the job done every time.

-
@Altis said:
Had the Farmer X on range duty today
Used the inline awl to clear some 22LR catridges that failed to extract... works well for this. The main screw driver removed some bad paper target staples on the plywood. The main blade cut the label tape to open a fresh box of CCI Velocitors.
Gets the job done every time.

Nice! Love shooting .22s.
The Camper helped reattach wires on my garage door opener after accidentally yanking them out.

-
My ‘92 Dutch Soldier had a busy week at my job. Amongst the usual box and letter opening it was called upon to open two family sized cans of Campbell’s Tomato Soup for a group lunch and took the handle off of a cupboard door to remove the Formica laminate that came unglued.
-
The good
Spoiler:
We spent some amazing time in the woods gathering mushrooms yesterday. I used Work Champ and handed a LM Signal with a brand new never used before factory sharped blade to my lady


Also used scissors to open a new pack of zesty Carpathian herbal tea [emoji478]

The bad
Spoiler:
After cutting a few shrooms the blade on a Work Champ stopped being shaving sharp - fixed really quick today, but to me shrooms are a pretty soft substance that shouldn’t affect sharpness that fast
The ugly
Spoiler:
It was a rainy day, so i just wiped both blades with my sweatshirt and put back in their sheaths.
Today I’ve also discovered some rust stains on a Signal blade [emoji17]
Cleaned easily with Ballistol and a piece of cloth, still I find it pretty disappointing


-
Can't beat Vic steel :D
Everything else dulls by comparison... -
Just envelopes..
Boring 😴 -
Pulled staples, and opened an Amazon package with my new knife.
What a beauty!


Sent from my SM-T387V using Tapatalk
-
I replaced a surveillance camera that had died.
This camera is in a spot that is hazardous to reach because it is on the side of a hill and it is easy to slip on the loose dirt and fall.
I had to have one hand free to keep me upright and since the camera was in one hand, I did not have a free hand to take my tool bag. I had my Cybertool 41 in my pocket which I figured would be good enough.
The Cybertool driver worked great removing the old camera and attaching the new one. This camera has an SD card and I used the bottle opener to get the SD card to pop out by pushing the card in farther (spring mechanism). After the card popped out, the pliers were able to grab it since it only popped out about 1/8 inch.
Thanks to the Cybertool, I didn't have to risk falling or making a second trip for my tools. I told my wife about it and she said, "Uh huh..." and went back to checking Facebook. So I figured I would tell someone who would care.

-
Awesome adventure , Swiss Guy, you Daredevil!

Sent from my SM-T387V using Tapatalk
-
@Swiss Guy said:
I replaced a surveillance camera that had died.This camera is in a spot that is hazardous to reach because it is on the side of a hill and it is easy to slip on the loose dirt and fall.
I had to have one hand free to keep me upright and since the camera was in one hand, I did not have a free hand to take my tool bag. I had my Cybertool 41 in my pocket which I figured would be good enough.
The Cybertool driver worked great removing the old camera and attaching the new one. This camera has an SD card and I used the bottle opener to get the SD card to pop out by pushing the card in farther (spring mechanism). After the card popped out, the pliers were able to grab it since it only popped out about 1/8 inch.
Thanks to the Cybertool, I didn't have to risk falling or making a second trip for my tools. I told my wife about it and she said, "Uh huh..." and went back to checking Facebook. So I figured I would tell someone who would care.

I know the 'uh huh' buddy

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
