Show off your Sak mod's!
-
Very nice work!
-
Two blue Wengers:
- one is an attempt at putting saw, file, Phillips and scissors in the smallest package. I'm not sure I will use it a lot, as I miss the awl. I have a feeling that a 91mm with the same toolset will be better... if only I can find a 91mm combo tool.
- the other is a S557 without the pliers (I'm not a fan of SAK pliers in general, and while I can stand the Victorinox in a pinch I actively hate the Wenger "double hinge"). This one did see a little use, but has now been superseded by my Cadet X/Super Cadet/Alox Salesman.
And blue scales for both, obviously.
-
Good mods

To avoid stripping a 91mm Compact, the Combo tool from the much cheaper 84mm Waiter is a good alternative. Is a little smaller and needs a reprofile on the pivot to get it to seat a little higher when closed, but works fine.
I used to think SAK pliers were a wot too, until I started carrying my SC daily. Just the other day, a parking ticket slipped down the side of my seat in the car. Just a tip of the ticket was showing down in the seat mechanism...too small a gap for my fingers. The SC pliers were perfect to extract the ticket.
I see them more as super tweezers...
-
Two bladeless Ramblers (one bladeless-ish because of the package opener/orange peeler) to use in public places, if they ever reopen. I decided to arrange the tools differently from the original for easier access to the nail nicks. I used titanium scales sold as a kit on Aliexpress (with matching screws), they worked as advertised. The only problem is that when the tweezer slot is empty, the spring next to it tends to move sideways inside inside it. To prevent this I decided to add an outer liner on this side, but then the tip of the screws isn't flush with the scales. I can live with this but YMMV.
-
Hello!
Yestreday I made all stainles steel knife. Configuration:- 2 big blades (one to use, one to abuse)
- little blade
- wood saw
- scissors,
- inline awl
- can opener
- bottle opener
- corkscrew
- little screwdriver (made from can opener)
- hook
- awl.
Scales are 1,5 mm stainless made from… see last pic 😊
Thickness: 18,9 mm.
Samek
-
@samek said:
Hello!
Yestreday I made all stainles steel knife. Configuration:- 2 big blades (one to use, one to abuse)
- little blade
- wood saw
- scissors,
- inline awl
- can opener
- bottle opener
- corkscrew
- little screwdriver (made from can opener)
- hook
- awl.
Scales are 1,5 mm stainless made from… see last pic 😊
Thickness: 18,9 mm.
Samek
Nice work Samek! -
Nice work
like the stainless scales and unique load out. -
All materials iI have been making SAK scales of – left to right:
brass flat
stainless
nickel silver
? material and brass
bone
? material
copper
brass rounded? material is made from tiny wood particels in same sort of artificial resin (perhaps melamine), I don't know name of it, but handles are very pleasant to hold.
Samek
-
Those are some great build samek

The mixed-media one is really nice.
As a consideration, I have started to use a 'floating' fourth pin, where I only drilled half-way through the inside of the scale. This pin does not hold much tension, just retains the backsprings.

-
Not your typical Yeoman...
The Yeoman essentially contains all the necessary tools I need as a dad in an urban environment; the only thing missing was a functioning screwdriver to reach those stubborn screws on battery compartments on kids' toys.
I obtained parts from my trusty Compact and the vintage car front scale and technician's screwdriver from a mangled Automobile to create this beauty. In addition to the associated tools on the backside plus scale, I added a ferro rod to the toothpick slot. I purchased a short tweezer and moved it to the hidden slot in the corner. I wanted to keep the toothpick, so I shaved down the head, cut off the cap to the long tweezer, glued them together, and returned them back to the standard tweezer location on the front scale. This is about 99.9% complete...just missing the perfect front scale that is very hard to obtain.
Still needs a name...thinking of "The Dad".


-
That's a cool mod

I like that name too. I can imagine a dad opening a bottle of Valpolicella Ripasso after a tough day fixing kid's toys. Hence the corkscrew obviously. -
Spartan PS "Green plus"



-
Stylish!
-
This is nothing to show-off, I rate it as a fail.
Was going to be ComboTool/Blade, Scissors, Saw, Magnifying Glass. Put in the File at the last moment.
I think five layers too much on a smallish frame and the spring on the ComboTool and Main Blade is weak. Not sure why as the snap is okay on the other tools.
Could be taking it apart again.

-
Just finished a similar Vic version of that one. Got the yellow scales for Christmas which I really like. I always felt and actual Explorer would need a saw and I like the two saws together so that’s how this came about. Chunky but I like it.

-
@faca said:
Ok I decided to do this one with bone dried for years in my garden.
This bone is cow bone from my butcher [emoji2957].
I acid wash the metals to give vintage looks.
Sorry no process pics but the most difficult part was to carve the holes for pins giving enough deepnes but not breaking the bone.
Quite happy with final result.







Enviado desde mi Mi 9 SE mediante Tapatalk
Faca, that vintage bone looks fantastic, well done.
-
Configuration: Ranger with an older, thicker main blade and its spring (stamped Officier Suisse with crosbow). Nickel silver bolsters, red plastic in from an older Vic knife, so it's solid, not hollow. Scales epoxi glued and peened. Bail stainless, rivets brass, brass bushings. Noticable havier and wider than regular Ranger :)
-
@samek said:
Configuration: Ranger with an older, thicker main blade and its spring (stamped Officier Suisse with crosbow). Nickel silver bolsters, red plastic in from an older Vic knife, so it's solid, not hollow. Scales epoxi glued and peened. Bail stainless, rivets brass, brass bushings. Noticable havier and wider **and cooler and awesomer and classier **than regular Ranger :)FTFY.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login















