Climber vs Compact
-
As someone who has carried both the Climber and the Compact (though not at the same time), I'm firmly in the Climber camp.
The primary issue is that the combo tool is a poor substitute for the opener layer, especially when it comes to driving screws. The cap lifter is considerably stouter than the combo tool, which gives it the edge, especially on larger, stuck, or stubborn standard screws.
Some folks advocate using the corner of the combo tool for Philips screws; but this is less than ideal. Others modify their combo tools so they fit Philips screws better, but this comes at the price of making the entire combo tool less robust as well as making it fit standard screws less well. The Vic can opener tool, however, is a thing of beauty. The small flat driver on the end does a great job on #1 or #2 Philips screws, as well as smaller standard screws. Also, I'll argue that, because of the tapered geometry and sharp edge, the can opener is actually better for removing stripped screws than most dedicated screwdrivers.
I also liked having the awl and small blade on the Climber, though you indicated indifference.
In terms of tools that the Compact has but the Climber doesn't, of course there is the hook file, but with a Rambler file at the ready (and the knowledge that most fingernail issues can be satisfactorily resolved with the scissors, without benefit of a file), the value of having the file on the hook may be reasonably questioned. If you already carry a separate pen, the plus scales are worth little; if you plan on replacing the scales anyway, they are worth nothing.
Finally, since you are used to carrying an Explorer, either the Climber or the Compact will feel svelte by comparison.
-
When i got my Compact, i got torn between choosing carrying the Compact or the Climber too... So much that i carried both for a while...

Carried the Compact for some months and like it a lot, but missed the full opening layer, small blade and awl, so i went back to the Climber.These days i went back to the Tinkers, mainly the Deluxe Tinker, or the Super Tinker.
But if you go the Compact route for a while and are worried about it's SD function, i'd advise this combo:

:D
-
@MacGyver said:
When i got my Compact, i got torn between choosing carrying the Compact or the Climber too... So much that i carried both for a while...
Carried the Compact for some months and like it a lot, but missed the full opening layer, small blade and awl, so i went back to the Climber.These days i went back to the Tinkers, mainly the Deluxe Tinker, or the Super Tinker.
But if you go the Compact route for a while and are worried about it's SD function, i'd advise this combo:

:D
That must feel nice in the pocket. Out of curiosity: do you have to buy new trousers often? >:D
-
@MacGyver said:
When i got my Compact, i got torn between choosing carrying the Compact or the Climber too... So much that i carried both for a while...
Carried the Compact for some months and like it a lot, but missed the full opening layer, small blade and awl, so i went back to the Climber.These days i went back to the Tinkers, mainly the Deluxe Tinker, or the Super Tinker.
But if you go the Compact route for a while and are worried about it's SD function, i'd advise this combo:

:D
Nice idea!
I carried the Compact for last months Minimalist Challenge... and to be honest, I only used the SD once.... and it was on a sort of a screw that you're meant to be able to tighten with anything - a coin, the back of a spoon, a toothbrush....
Over the years, whenever I carry the Compact for a while, what gets me back on to something else is the opener layer.
But that's how it goes, doesnt it? On the one day that you need a can opener, or tweezers, or pliers, or you-name-it... you kick yourself and go back into your SAK sack to get a different one.
-
I think the typical answer applies--buy both. :D
Going by typical used prices, Climber. A LOT cheaper than a Compact. Plus, you have an awl, and two drivers (three if you add a mini driver to the CS). The downside is that once you look at the Climber, you'll see that the Huntsman adds a saw, and isn't much heavier or thicker. And, just as common used.
The Compact is better as a carry, as it's slimmer and lighter. Plus, the full Plus kit goodies come standard (pen, pin, and mini driver). The Combo tool ain't the best driver, but usually, when I carry my Golfer (like a Compact, just a divot repair tool replaces the combo tool, which means NO drivers at all; aside from the mini driver in CS; but I did get it for less than $10), I have either the old, USA made version of the SwissTech tool with pliers, or an old Craftsman 4-in-1 keychain driver. Both have very strong drivers on them and aren't that heavy add-ons. But, people tend to want $20-30 for them used, if not more.
-
While I'm a fan of the Compact, I voted Climber for you mostly because of the in-line phillips requirement. The combo tool was satisfactory for me as an office worker, but it makes a poor phillips driver. Money is a consideration, and the Climber is also less expensive than the Compact.
You wanted to limit it to the Compact and Climber, but as the corkscrew was not on your list of requirements you might also want to consider the Super Tinker.
-
@smiller43147 said:
While I'm a fan of the Compact, I voted Climber for you mostly because of the in-line phillips requirement. The combo tool was satisfactory for me as an office worker, but it makes a poor phillips driver. Money is a consideration, and the Climber is also less expensive than the Compact.You wanted to limit it to the Compact and Climber, but as the corkscrew was not on your list of requirements you might also want to consider the Super Tinker.

-
@Sawl Goodman said:
I suggested a Spartan upthread and got no response. I think he's hung up on having the hook. :D Fair enough!Hey yeah sorry about that! Had a lot of replies and kinda soaking in a lot.
I do like having the Hook more than I ever thought I would. But mostly, I’ve discovered that I want those larger sized scissors that the Climber or Compact come with. Half the time I had to swap to my Explorer to cut with, over my Rambler.But if the scissors weren’t such a necessity, I’d definitely go that route!
Sent from my iPhone using Tapatalk
-
@smiller43147 said:
While I'm a fan of the Compact, I voted Climber for you mostly because of the in-line phillips requirement. The combo tool was satisfactory for me as an office worker, but it makes a poor phillips driver. Money is a consideration, and the Climber is also less expensive than the Compact.You wanted to limit it to the Compact and Climber, but as the corkscrew was not on your list of requirements you might also want to consider the Super Tinker.
That’s my bad for not putting more emphasis on the corkscrew. I really prefer it over the Phillips, in general. Especially with the added mini screwdriver.
The Super Tinker was definitely on my list, to begin with. My only concern is the over-torquing stories I’ve seen. And the loss of a corkscrew, of course.
I won’t rule it out, but that’s my whole problem. I’m super indecisive. Lol
If I end up preferring the Climber I may have to go down another rabbit hole and pick between the Super Tinker and Climber.....
Sent from my iPhone using Tapatalk
-
Between the two I would go Climber. The can opener can work on Phillips, some torx screws, Robertson screws, works as a scraper. Small blade is great to have, bottle cap opener better as mini pry bar. Finally Climber is less expensive.

-
Could also just make or buy a Yeoman and have the best of all worlds...
-
@SirZanos said:
Hey yeah sorry about that! Had a lot of replies and kinda soaking in a lot.
I do like having the Hook more than I ever thought I would. But mostly, I’ve discovered that I want those larger sized scissors that the Climber or Compact come with. Half the time I had to swap to my Explorer to cut with, over my Rambler.But if the scissors weren’t such a necessity, I’d definitely go that route!
Sent from my iPhone using Tapatalk
No worries. :)
Agree with the Climber supporters, then.

-
@Wessaen said:
Could also just make or buy a Yeoman and have the best of all worlds...This was my original idea and plan in a previous post I made. But currently it’s not in the cards for me. It would probably be my preference, as I don’t really need a pry bar, and the combo would work fine for the rare flathead only, in electronics. I’d just hate losing the Small Blade, probably.
While I feel like it competes against the Super Tinker, I’d probably end up choosing the Yeoman. I’ve never owned a Yeoman, but it really looks like my ideal SAK. Shame they don’t make them anymore.
Sent from my iPhone using Tapatalk
-
@Sos24 said:
I would say the Climber. One of the biggest things you lose between the Compact and Climber is the Phillips driver tip on the can opener, which you listed as one of the main tools you tend to use.Some people mod the profile of the combo tool to make it usable as a Phillips, which if that interests you the Compact would work.
I’ve been looking for this particular mod for a futur yeoman mod, have you any source ?
The search engine is not really helping when used for « combo tool mod »
Thanks a lot
-
@bismouth said:
I’ve been looking for this particular mod for a futur yeoman mod, have you any source ?The search engine is not really helping when used for « combo tool mod »
Thanks a lot
I can’t remember who did it, but there are a couple members here who have done it. Although, the Yeoman already has an inline phillips so I’m not sure why you would want to reprofile the combo tool to work as a phillips.
-
As far as scales the climber also gives you the option of the nylon stayglow. If you have never had nylon and you like glow in the dark
-
I voted Climber namely because of the Awl. Mrs R showed me how to sew with the Awl and crochet with the hook, both on my Climber. I did a week in the wilderness with a Climber, with no complaints. I've never heard a complaint from a Compact carrier. There's not many cans that aren't pull tabs anymore, and most bottles are twist offs. Then again, most screws are Philips anymore. I think the Compact, in conjunction with a keychain tool, would be a great carry.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login