Climber vs Compact
-
@Sawl Goodman said:
I suggested a Spartan upthread and got no response. I think he's hung up on having the hook. :D Fair enough!Hey yeah sorry about that! Had a lot of replies and kinda soaking in a lot.
I do like having the Hook more than I ever thought I would. But mostly, I’ve discovered that I want those larger sized scissors that the Climber or Compact come with. Half the time I had to swap to my Explorer to cut with, over my Rambler.But if the scissors weren’t such a necessity, I’d definitely go that route!
Sent from my iPhone using Tapatalk
-
@smiller43147 said:
While I'm a fan of the Compact, I voted Climber for you mostly because of the in-line phillips requirement. The combo tool was satisfactory for me as an office worker, but it makes a poor phillips driver. Money is a consideration, and the Climber is also less expensive than the Compact.You wanted to limit it to the Compact and Climber, but as the corkscrew was not on your list of requirements you might also want to consider the Super Tinker.
That’s my bad for not putting more emphasis on the corkscrew. I really prefer it over the Phillips, in general. Especially with the added mini screwdriver.
The Super Tinker was definitely on my list, to begin with. My only concern is the over-torquing stories I’ve seen. And the loss of a corkscrew, of course.
I won’t rule it out, but that’s my whole problem. I’m super indecisive. Lol
If I end up preferring the Climber I may have to go down another rabbit hole and pick between the Super Tinker and Climber.....
Sent from my iPhone using Tapatalk
-
Between the two I would go Climber. The can opener can work on Phillips, some torx screws, Robertson screws, works as a scraper. Small blade is great to have, bottle cap opener better as mini pry bar. Finally Climber is less expensive.

-
Could also just make or buy a Yeoman and have the best of all worlds...
-
@SirZanos said:
Hey yeah sorry about that! Had a lot of replies and kinda soaking in a lot.
I do like having the Hook more than I ever thought I would. But mostly, I’ve discovered that I want those larger sized scissors that the Climber or Compact come with. Half the time I had to swap to my Explorer to cut with, over my Rambler.But if the scissors weren’t such a necessity, I’d definitely go that route!
Sent from my iPhone using Tapatalk
No worries. :)
Agree with the Climber supporters, then.

-
@Wessaen said:
Could also just make or buy a Yeoman and have the best of all worlds...This was my original idea and plan in a previous post I made. But currently it’s not in the cards for me. It would probably be my preference, as I don’t really need a pry bar, and the combo would work fine for the rare flathead only, in electronics. I’d just hate losing the Small Blade, probably.
While I feel like it competes against the Super Tinker, I’d probably end up choosing the Yeoman. I’ve never owned a Yeoman, but it really looks like my ideal SAK. Shame they don’t make them anymore.
Sent from my iPhone using Tapatalk
-
@Sos24 said:
I would say the Climber. One of the biggest things you lose between the Compact and Climber is the Phillips driver tip on the can opener, which you listed as one of the main tools you tend to use.Some people mod the profile of the combo tool to make it usable as a Phillips, which if that interests you the Compact would work.
I’ve been looking for this particular mod for a futur yeoman mod, have you any source ?
The search engine is not really helping when used for « combo tool mod »
Thanks a lot
-
@bismouth said:
I’ve been looking for this particular mod for a futur yeoman mod, have you any source ?The search engine is not really helping when used for « combo tool mod »
Thanks a lot
I can’t remember who did it, but there are a couple members here who have done it. Although, the Yeoman already has an inline phillips so I’m not sure why you would want to reprofile the combo tool to work as a phillips.
-
As far as scales the climber also gives you the option of the nylon stayglow. If you have never had nylon and you like glow in the dark
-
I voted Climber namely because of the Awl. Mrs R showed me how to sew with the Awl and crochet with the hook, both on my Climber. I did a week in the wilderness with a Climber, with no complaints. I've never heard a complaint from a Compact carrier. There's not many cans that aren't pull tabs anymore, and most bottles are twist offs. Then again, most screws are Philips anymore. I think the Compact, in conjunction with a keychain tool, would be a great carry.
-
Alright guys, I’ve picked the Climber! And it’s on its way!
Perhaps one day I’ll get the Compact, too. But I went with the Climber this time, because I ultimately knew what I was getting into, since I already have the Explorer.
Maybe after carrying the Climber for a good 6 months I’ll consider the Compact again, at that time. And if I’m still in love with the Climber, I’ll just grab some Plus scales.
Thanks a lot for all the input, and I hope that this post helps someone else with this question in the future!
Feel free to continue posting your opinions and casting your votes, though!
Sent from my iPhone using Tapatalk
-
@Sos24 said:
I can’t remember who did it, but there are a couple members here who have done it. Although, the Yeoman already has an inline phillips so I’m not sure why you would want to reprofile the combo tool to work as a phillips.Yeah, sorry for my English.
If the mod of the combo tool is successful, it would avoid me to do a Yeoman mod :D and sacrifice a Compact and a Explorer as my primary need is 2 layers and something to work on philips heads (and yes I need a corkscrew)
Well, if you find the link to the mod, let me know !
-
@bismouth said:
Yeah, sorry for my English.If the mod of the combo tool is successful, it would avoid me to do a Yeoman mod :D and sacrifice a Compact and a Explorer as my primary need is 2 layers and something to work on philips heads (and yes I need a corkscrew)
Well, if you find the link to the mod, let me know !
I‘ve done that mod before. It is very easy. All I did was to use a dremel to remove a bit of material at the top edge. Please see pictures below. I like it better as a screwdriver that way, but it doesn‘t beat the can opener on Alox!


-
They should make the compact but instead of the corkscrew put the philips and switch out the 91 regular scales for the 93 alox ones!
JR -
@SirVicaLot said:
I‘ve done that mod before. It is very easy. All I did was to use a dremel to remove a bit of material at the top edge. Please see pictures below. I like it better as a screwdriver that way, but it doesn‘t beat the can opener on Alox!

Thanks ! that's perfect! -
@MadPlumbarian said:
They should make the compact but instead of the corkscrew put the philips and switch out the 91 regular scales for the 93 alox ones!
JRI've got something like that, but I'm not convince by the philips as a "backtool":

-
@SirVicaLot said:
I‘ve done that mod before. It is very easy. All I did was to use a dremel to remove a bit of material at the top edge. Please see pictures below. I like it better as a screwdriver that way, but it doesn‘t beat the can opener on Alox!

Interesting modification! I have a couple of knives that serve as "guinea pigs" for minor mods like this one, such as a Waiter with a semi-sharpened combo tool for openening packages. I think I'll try out this one as well. Thanks for the idea!
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login