NOT pleased with leatherman
-
"IMO, I believe function is way ahead of F&F in terms of importance."
I believe that F&F and function are inseparable. You can't have good "function" in a tool without good "fit & finish" on the same in the first place, and vice versa.
Just think about it this way: Price = Materials+Workmanship
If the Materials are cheap and the Workmanship is sub-par (if one can see it), then one would think twice of paying a high Price.
I think that you just can't have a high-priced tool with a low level of workmanship at the same time. There is really something wrong in there.
-
I don't know how many Charges that ppl on here are having problems with but how many ppl here have them and don't have problems with them
I am willing to say that the majority that have them have no problems it just so happens that they don't go around talking so much about it :) -
My Charge ALX has been awesome. I use it hard. I've been using it as an"electrician's" plliers in our current renovation project. I sent it in this week because the plier jaws have loosened to the point where it won't cut small gauge wire-- still great for large gauge though. I'll make do with the SURGE!! or Wave until it returns
-
@Poncho65 said:
I don't know how many Charges that ppl on here are having problems with but how many ppl here have them and don't have problems with them
I am willing to say that the majority that have them have no problems it just so happens that they don't go around talking so much about it :)Having just read through this post, I decided to take a look at my Charge TTi. I mean really take a look at it. This is the first multitool I've ever owned, bought about 19 or 20 months ago. I haven't abused it, but it has been used extensively. Heck, for a while, it, a hammer, and a 5" crescent wrench were the only tools I actually owned. Up close, it has all of the imperfections mentioned by the OP. The file scrapes, which has never bothered me. I figured it was par for the course (this is the only full-sized leatherman I own). The handle slabs aren't quite even, and there are grind marks on the one-handed opening holes. Doesn't bother me in the least. There may have also been scratches when I first purchased the tool from Amazon, but it has gathered so many in the time I've had it that I can not tell which are O.G. and which are acquired. The only gripe I had about my Charge was that the pliers did not close completely without Herculean strength. Maybe the pivots were too tight, which has since been remedied by LM's warranty.
The point of my rambling post? That despite other multis (Vic included), despite its imperfections, despite its price-point and basically buying the Leatherman name, it's still my favorite tool for its versatility, workmanship, and materials. I know that should I snap it in half, Leatherman will have my back and fix or replace the tool. I don't foresee this happening, but you never know.
I won't say that I'm a lifetime customer, because you never know what may come down the line. But, given the outstanding performance and warranty service I've received so far, I will definitely be purchasing further multis from them for the foreseeable future. Probably starting with the ST300 (it looks fun :D)
-
@Sean said:
I don't know about the rest of you guys who have a TTI, did they come with scratches like that?My Charge Ti (not TTi) was purchased brand new and have those tiny scratches on the scales as well. The diamond file and SE blade rubs against the scales (my SE blade has scratch marks from that) and the plier head is scratched up from just opening and closing the Charge(!!!). I haven't even used my Charge yet! Fortunately, the plier nose is not cracked and the blades are not rough as shown in the pictures in this topic. The blades look perfect (aside from my SE blade having two long vertical scratch lines (from the titanium scales I presume.)
Now, I do love my discontinued Charge Ti but considering it's Leatherman's flagship tool, the quality should have been better.
-
OK, here's a few pictures of my *Charge Ti * and its unfortunate blemishes. The Charge itself is in pretty excellent condition except for the SE blade and plier head which is the result of poor fit. <u>Keep in mind that my Charge has never been used before and all these scratches are from just opening and closing the tool a few times</u>.

As you can see here, the SE blade has long scratch lines from rubbing up against the titanium scales. **You actually can't see these lines unless you look at the blade from a certain angle. ** For this picture, I angled the camera and lighting to make this scratch lines stand out more.
One side of the plier head...
...the other side. These lines are actually made by the plier head rubbing up against the handles when I open and close my Charge. On the handles, the area where the plier head is when closed is actually worn from the plier head rubbing it.As I mentioned before, these blemishes are pretty minor to me but when you pay a premium price for a tool that is supposed to be a company flagship, the quality you get should also be premium.
-
I have had a Charge TTi for a short while now and I’m also not that impressed with the Charge according to the price. The file rubs against the handle and the scissor is hard to deploy. I also don’t like the placement of the cap crimper.
But I will give the Charge some time on the belt and se if I change my mind.
-
@Poncho65 said:
I don't know how many Charges that ppl on here are having problems with but how many ppl here have them and don't have problems with them
I am willing to say that the majority that have them have no problems it just so happens that they don't go around talking so much about it :)I haven't been on this board that long, but I seriously doubt there are these many complaints about the wave.
The charge is poorly manufactured, and overpriced. I love my wave and just got a surge which is also nice, but kinda heavy. also have a blast, core micra & squirt(and a purple juice on order). the TTI was the only LM MT I have returned.
-
I still LOVE Charge's but man oh man the QC SUCKS! I got another TTi on Monday and the serrated blade had a ton of play! GUESS WHAT, I CAN'T RETURN IT TO LM BECAUSE I HAVE SENT 6 CHARGE'S BACK DUE TO MANUFACTURING DEFECTS LIKE PLAY IN LINER LOCKS!! I don't mind the file rubbing or the scales being different but play in a lock really bugs me. I just called about a Camo Charge TTi that had a 154CM blade instead of S30V and the rep said "It seems as if every tool you buy has flaws". And I responded with "your absolutely correct and your quality control is terrible! I have lost interest in LM products" and I hung up the phone. Which is false, but this really pisses me off! >:(
If LM had decent quality control I wouldn't have to keep sending tools in! I am going to write them a nasty letter! :-X I'm not going to lose a finger because you have employees that hate their job and don't give a shi* about the tools; all they care about is getting drunk or high after work!!! I am pretty angry as you can tell. I may change my username to Victorinox123! ;)
You guys may think I am blowing this out of proportion but I can honestly find something wrong with every single charge I get!
-
@Leatherman123 said:
I just called about a Camo Charge TTi that had a 154CM blade instead of S30V and the rep said "It seems as if every tool you buy has flaws". And I responded with "your absolutely correct and your quality control is terrible! I have lost interest in LM products" and I hung up the phone.You should've responded "Yeah, well it seems that every Charge your company makes has flaws."
-
Hey Nikko, we could all help you with the agony you're going through; just distributed your Charges to the forum members and let us whine about their problems instead... ::)
:D -
@noth said:
Hey Nikko, we could all help you with the agony you're going through; just distributed your Charges to the forum members and let us whine about their problems instead... ::)
:DIf LM123 dumped all his charges on the market at one time the price of Charges would tank overnight and all our charges would be less valuable. :)
-
The LMs with the best fit and finish by far are the smallest ones of all — the Squirts.
No rough edges there, no rubbing. Works smooth as silk. Better fit and finish than most small Vics!
It shows that LM can beat Victorinox at its own game if they try. -
The same goes with the LM Juice's!
BTW, the LM Skeletool CX has amazing "fit and finish". It screams quality!
-
@Leatherman123 said:
GUESS WHAT, I CAN'T RETURN IT TO LM BECAUSE I HAVE SENT 6 CHARGE'S BACK DUE TO MANUFACTURING DEFECTS LIKE PLAY IN LINER LOCKS!!Perhaps you could have a friend send it in under his name then? ;) >:D
-
@Leatherman123 said:
**The same goes with the LM Juice's! **BTW, the LM Skeletool CX has amazing "fit and finish". It screams quality!
Funny you say that. Yesterday I was marveling at the snap on my CS4. I don't like how the saw/awl function together, but it's dealable. The backsprings are really amazing.
-
Just think about it this way: Price = Materials+Workmanship
I can't believe that I don't recall that from my accountancy qualifications and years of business experience. ::)
LOL. Sorry for the simpleton explanation. :D
Maybe LM should just change the features list for the Charge to match it (and put an end this discussion):
a) Ergonomic, titanium-scales - moves around during use to conform to the shape of your palm/hand.
b) Self-wearing diamond file - gone before you know it.
c) Play-full tool selection.
d) Tough on everything else. Including your wallet.::)
-
Oooh now you've done it. :ahhh

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login