NOT pleased with leatherman
-
I have had a Charge TTi for a short while now and I’m also not that impressed with the Charge according to the price. The file rubs against the handle and the scissor is hard to deploy. I also don’t like the placement of the cap crimper.
But I will give the Charge some time on the belt and se if I change my mind.
-
@Poncho65 said:
I don't know how many Charges that ppl on here are having problems with but how many ppl here have them and don't have problems with them
I am willing to say that the majority that have them have no problems it just so happens that they don't go around talking so much about it :)I haven't been on this board that long, but I seriously doubt there are these many complaints about the wave.
The charge is poorly manufactured, and overpriced. I love my wave and just got a surge which is also nice, but kinda heavy. also have a blast, core micra & squirt(and a purple juice on order). the TTI was the only LM MT I have returned.
-
I still LOVE Charge's but man oh man the QC SUCKS! I got another TTi on Monday and the serrated blade had a ton of play! GUESS WHAT, I CAN'T RETURN IT TO LM BECAUSE I HAVE SENT 6 CHARGE'S BACK DUE TO MANUFACTURING DEFECTS LIKE PLAY IN LINER LOCKS!! I don't mind the file rubbing or the scales being different but play in a lock really bugs me. I just called about a Camo Charge TTi that had a 154CM blade instead of S30V and the rep said "It seems as if every tool you buy has flaws". And I responded with "your absolutely correct and your quality control is terrible! I have lost interest in LM products" and I hung up the phone. Which is false, but this really pisses me off! >:(
If LM had decent quality control I wouldn't have to keep sending tools in! I am going to write them a nasty letter! :-X I'm not going to lose a finger because you have employees that hate their job and don't give a shi* about the tools; all they care about is getting drunk or high after work!!! I am pretty angry as you can tell. I may change my username to Victorinox123! ;)
You guys may think I am blowing this out of proportion but I can honestly find something wrong with every single charge I get!
-
@Leatherman123 said:
I just called about a Camo Charge TTi that had a 154CM blade instead of S30V and the rep said "It seems as if every tool you buy has flaws". And I responded with "your absolutely correct and your quality control is terrible! I have lost interest in LM products" and I hung up the phone.You should've responded "Yeah, well it seems that every Charge your company makes has flaws."
-
Hey Nikko, we could all help you with the agony you're going through; just distributed your Charges to the forum members and let us whine about their problems instead... ::)
:D -
@noth said:
Hey Nikko, we could all help you with the agony you're going through; just distributed your Charges to the forum members and let us whine about their problems instead... ::)
:DIf LM123 dumped all his charges on the market at one time the price of Charges would tank overnight and all our charges would be less valuable. :)
-
The LMs with the best fit and finish by far are the smallest ones of all — the Squirts.
No rough edges there, no rubbing. Works smooth as silk. Better fit and finish than most small Vics!
It shows that LM can beat Victorinox at its own game if they try. -
The same goes with the LM Juice's!
BTW, the LM Skeletool CX has amazing "fit and finish". It screams quality!
-
@Leatherman123 said:
GUESS WHAT, I CAN'T RETURN IT TO LM BECAUSE I HAVE SENT 6 CHARGE'S BACK DUE TO MANUFACTURING DEFECTS LIKE PLAY IN LINER LOCKS!!Perhaps you could have a friend send it in under his name then? ;) >:D
-
@Leatherman123 said:
**The same goes with the LM Juice's! **BTW, the LM Skeletool CX has amazing "fit and finish". It screams quality!
Funny you say that. Yesterday I was marveling at the snap on my CS4. I don't like how the saw/awl function together, but it's dealable. The backsprings are really amazing.
-
Just think about it this way: Price = Materials+Workmanship
I can't believe that I don't recall that from my accountancy qualifications and years of business experience. ::)
LOL. Sorry for the simpleton explanation. :D
Maybe LM should just change the features list for the Charge to match it (and put an end this discussion):
a) Ergonomic, titanium-scales - moves around during use to conform to the shape of your palm/hand.
b) Self-wearing diamond file - gone before you know it.
c) Play-full tool selection.
d) Tough on everything else. Including your wallet.::)
-
Oooh now you've done it. :ahhh

-
well... maybe if they start manufacturing them in China you might see quality control start to even out more. :P
-
@Sean said:
well... maybe if they start manufacturing them in China you might see quality control start to even out more. :PMaybe be cheaper as well :)
seriously though, what isn't made in china these days. I defy you to look around you and not find a chinese made product. My Dell mouse and keyboard - Chinese. Remote controls, cell phone even microsoft xbox 360 controller all made in china, it boggles the mind ???
-
well... maybe if they start manufacturing them in China you might see quality control start to even out more. :P
Maybe be cheaper as well :)
seriously though, what isn't made in china these days. I defy you to look around you and not find a chinese made product. My Dell mouse and keyboard - Chinese. Remote controls, cell phone even microsoft xbox 360 controller all made in china, it boggles the mind ???
Pure business. Labor costs, regulatory costs, environmental costs, ease of scaling up or down manufacturing, all much easier in China. But not without a downside.
However, as fuel costs go up, these things will level out. When it costs more to ship a tool than it did to manufacture it, then it starts to make sense to move manufacturing closer to the market. Then again, that doesn't assure better quality. Corporate climate is what leads to better quality.
-
@Mr. Whippy said:
well... maybe if they start manufacturing them in China you might see quality control start to even out more. :P
Maybe be cheaper as well :)
seriously though, what isn't made in china these days. I defy you to look around you and not find a chinese made product. My Dell mouse and keyboard - Chinese. Remote controls, cell phone even microsoft xbox 360 controller all made in china, it boggles the mind ???
Pure business. Labor costs, regulatory costs, environmental costs, ease of scaling up or down manufacturing, all much easier in China. But not without a downside.
However, as fuel costs go up, these things will level out. When it costs more to ship a tool than it did to manufacture it, then it starts to make sense to move manufacturing closer to the market. Then again, that doesn't assure better quality. Corporate climate is what leads to better quality.
Well said Mr. W

-
well... maybe if they start manufacturing them in China you might see quality control start to even out more. :P
Maybe be cheaper as well :)
seriously though, what isn't made in china these days.
Leatherman Tools? ;)
I still don't buy the "LM QC sucks" argument, and I think I see where the different opinions are formed - in individual expectations.
To my mind, good QC really means making sure that the product (in this case the tool) is fit for purpose and within tolerance for things like aesthetics etc. It seems that many people here place high priority on the latter, whereas I don't as the former is far more important to me.
Thinking back to the car analogy used earlier in the thread, I don't see tools and cars as comparable really. Maybe a better anology would be something like a broom? As long as it's functional, robust and I'm not going to get splinters from using it, I really couldn't care less whether the varnish was applied to the handle evenly. I reckon some of you lot would be apoplectic!! :D
Shininess, clickiness whatever aren't important to me at all really, although, as I've said a number of times on here, I do enjoy pawing the Swisstool & Spirit from time to time, but let's be honest, it makes bugger all difference to the intended use of the tool does it?
Some of the things listed are genuine problems, but mostly it's grumbles about things that really don't matter to most users of tools I would suggest.
In summary, rather than being poor - it's more likely that Leatherman's QC is based on what their customers *generally *consider to be important, not what you guys see as important.
-
@DaveK said:
In summary, rather than being poor - it's more likely that Leatherman's QC is based on what their customers *generally *consider to be important, not what you guys see as important.I think this would be the case. I'm willing to bet 99.9% of the tools Leatherman sells are opened and then successfully put into service as a tool. I'm guessing they don't factor in the people buying them to be displayed in a glass case.
-
Yeah we forget ppl use them sometimes I guess
:D -
From my POV there are two types of issues: (a) cosmetic/aesthetic "blemishes", such as machining marks or fuzzy lettering on the Ti scales, raw blade hole edges, etc, and (b) real-use issues, such as faulty linerlocks, plier head or file rubbing against handles, etc. If the tool is to be put in a glass case then you only care for (a)-type things; else, (b)-type problems come to haunt you. Overgeneralizing and stating that "these are all cosmetic stuff" or "these all get in the way when using the tool" are both wrong. Assuming they should be caught during QC checks, on the other hand, is a fact.
That said, QC slippage is not a LM-only thing. I've also had QC issues with Gerbers and Vics. As Dave said, it's the user expectations that are very high for a hyped-up/probably overpriced tool such as the TTi. However, what counts the most for me is that LM will always stand behind their customers (even via less-than-perfect reps) and in the end the tools they manufacture are all top notch no matter what. My older Ti has been "serving" along a certain totally tool-hostile marine officer for the last couple of years and, besides the occasional surface rust, it has pulled through just fine. My current TTi has all sorts of QC issues (including file rubbing, linerlocks not fully engaging, scales not perfectly aligned, etc.), yet it is still my go-to tool when I feel like carrying something heavier/more "tactical" than my EDC Spirit.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login