Vintage SAK Owners Club
-
Hello everyone! I found that I also have a few 1970s Champions, even with whole scissors. I thought it would be interesting to list the tool changes you know and the approximate dates. In the pictures there are two champions pre 1973, two 1973-1974 (I believe, but you can correct me) and last two from c.1974 and late 1970s.





Here is my list of changes we can see on knives above, correct and add it please!- Let's list well known 1973 changes together:
- introduction of a magnifying glass and phillips
-scissors now without LNF and, accordingly, on the opposite side of the main blade
-a new kind of metal saw / file plus a small flat screwdriver on its back
-ruler on hook extractor - introduction of a corkscrew with 4 turns
-reduction of the thickness of the main blade from 2.7 to 2.4mm
-changing the type of spring of blades - missing Victoria Officier's Suisse crossbow stamp
- introduction of clip point small blade
- Scissors model 1952 with a single spring - until 1973
- Transit scissors (late 1960s) with long groove, double spring, blunt ends - until 1973 or 1974?
- Scissors with short groove, double spring, small spring attachment hole and screw, blunt ends 1973(?) - 1974(?)
- Scissors with double thinner spring, large spring hole and screw, sharp ends 1975-1991
- Thick liner between metal saw and wood saw - since ?
- Additional full liner without cutouts (see Champion on the right) - since ?
- Notch at the end of the metal saw/wood saw spring 1979?
- Changing the shape of the wood saw end - 1979?
- Blank main blade stamp- 1973-1974?
- Officier's Suisse crossbow stamp - since 1974 or 1975?
-
Wow - what a collection!

-
Now it looks like we’re getting somewhere!

But I noticed that the knife in position ‘5’ changes in the bottom pic. ;) (see attached)
I could use one shot of all 6 from the top tools closed to confirm some things. Perhaps I will wait to ask for more, because several tool details are ‘hidden’ to me with the provided views.
But my guesses for the dates are:
c.’71.75
c.’72.25
c.’73.25
c.’73.5
c.’74.25
Last one...tough to dial in at all and should be the easiest. ‘79ish? Looks like the scaler got the saw backspring or the same stamping.
Mod/repair?
-
@jnoxyd said:
Here is my list of changes we can see on knives above, correct and add it please!- Let's list well known 1973 changes together:
- introduction of a magnifying glass and phillips
-a new kind of metal saw / file plus a small flat screwdriver on its back
I think these are pretty clear for start dates. I used to think the back driver was c.‘72, but less so recently.
-scissors now without LNF and, accordingly, on the opposite side of the main blade
Perhaps yes...the end date for main line knives and Champions...but not all.
-ruler on hook extractor
I think very late ‘72 for these. But early ‘73 is certainly possible. There is the example of the 146fmaU with the short-lived early font. I have this in main line and Hoffritz variants.
- introduction of a corkscrew with 4 turns
-reduction of the thickness of the main blade from 2.7 to 2.4mm
-changing the type of spring of blades - missing Victoria Officier's Suisse crossbow stamp
- introduction of clip point small blade
I caution combining the start/introduction dates with the end dates.
2.7mm layer parts were used later than ‘73, and as I’ve been trying to show, MIXED with 2.4mm parts.
Look at how some parts were introduced as 2.7mm, like the 4 loop CS when seen with clip points...- Scissors model 1952 with a single spring - until 1973
- Transit scissors (late 1960s) with long groove, double spring, blunt ends - until 1973 or 1974?
- Scissors with short groove, double spring, small spring attachment hole and screw, blunt ends 1973(?) - 1974(?)
I think the relevant starts are ‘51, c.’70
The gap machining is transitional, and varies quite a bit. I haven’t ‘assigned’ a date to the first major variation of the gap size. There is more progression of sorts if you look for it, as well as many other observable traits. Some that are shared with the “1951” when their use overlaps.- Scissors with double thinner spring, large spring hole and screw, sharp ends 1975-1991
I think later start. c.’77 late or 2nd half ‘76 at the very earliest, from what I can tell.
- Thick liner between metal saw and wood saw - since ?
From what I can tell, depends on the model. Note that later, it shows up on knives with either saw. Like in later Grands Prix and Campers.
- Additional full liner without cutouts (see Champion on the right) - since ?
Look at the “1973” auction knife. ;) Hint, hint.
- Notch at the end of the metal saw/wood saw spring 1979?
- Changing the shape of the wood saw end - 1979?
these two go together. The surprise for me was the scaler with the bump. Not sure if yours is an error or perhaps a running change that I did not spot or own.
- Blank main blade stamp- 1973-1974?
I think a later end date.
- Officier's Suisse crossbow stamp - since 1974 or 1975?
Ditto on this start date.
-
@kamakiri said:
Not my knife, but this is an example of another clip point that is certainly not c.’73Notice that it doesn’t have a ‘Victoria era’ backspring like noted previously in the thread.
Note the VSSR/OS tang stamps.
I hope this is clear enough proof of what I’ve been saying.
The occurrence of clip point pen blades on SAKs with a 2.4mm blades layer is well known. Here is what JazzBass wrote about it more than eight years ago:
@jazzbass said:
The earliest 2.4mm blade knives seem to come in two flavors: plain back main + spear point pen blade, or "Officier Suisse" back/clip point pen. I have no idea which of these are the older of the two. Plain back 2.4mm blades are more common to see than plain back 2.7mm blades. Mid-late 70s they evolve into the common "Officier Suisse"/spear point pen that you see until the change in 2004.This is quite different from the following:
@kamakiri said:
2.7mm layer parts were used later than ‘73, and as I’ve been trying to show, MIXED with 2.4mm parts.You have been circling around something here for about ten posts with quite a few images and I still don't understand what is your EXACT claim. Are you trying to say that they installed 2.4mm blades on SAKs with 2.7mm springs? If so, why can't you just express it in clear language. If you are claiming something else, I cannot even guess what it is. So, what exact mixture (or mixtures) of parts are you referring to? Also, are your claims based on SAKs in your possession or on things that you believe to be seeing in images like the ones that you posted here?
-
Well, now I understand the source and manner of the confusion.
I’m trying too hard to bridge small gaps in understanding of the chronology, where larger gaps exist.
I don’t think explaining further is going to help right now. At least not without a massive effort on my part.
The main thing I’d assert is as I said...that the “1973” knife in question isn’t 1973 or even c.’73. The tweezers alone prove that. I probably should have stopped right there to avoid further confusion.
-
@kamakiri said:
Well, now I understand the source and manner of the confusion.I doubt it.
I’m trying too hard to bridge small gaps in understanding of the chronology, where larger gaps exist.

I don’t think explaining further is going to help right now.
I tend to agree.
The tweezers alone prove that.
I wonder what do the tweezers "prove" in the attached image.
I probably should have stopped right there to avoid further confusion.
Not much real confusion here. I think that quite a lot has been clarified.

-
@MiniChamp said:
I doubt it.Well, that’s what you do.
I’ll give you one more thing to doubt. Your dates for the Hoffritz catalogs you posted are closer to the ‘end’ dates for thier use. Particularly the “1974” and “1979” copies. The included price sheets are likely the <u>last</u> ones used for those. The “1979” copy was likely in use by ‘77.
The irony here is that you’re doubting my claim that the “1973” Super Knife (Champion) isn’t built c.’76. If I’m wrong, then why the heck isn’t it in the “1974” catalog or the one you call “1977”?
FWIW, and I’m sure you’ll doubt something else here...but I have lots of Hoffritz knives from the entire 1970s range to support this. As well as the main line counterparts or ‘twins’ (where available because of models like the 136kmaU). More specifically, enough knives of all product lines that date separately to ‘73 and ‘74...to know 100% that the auction knife isn’t 1973 or even c.’73.
But I see now that I can’t convince you of subtle or minor differences when you don’t seem to have the major ones well sorted. You doubt that the majority of knives can be dated to within a year. And for that I can only feel sorry for you.
The snark about the tweezers, I actually appreciate. But I think you take your fixed opinions far too seriously. Loosen up. You just might learn something. Even if by accident.
Not much real confusion here. I think that quite a lot has been clarified.
I doubt that.
:D
-
Why do you think that anyone can learn anything from you when you refuse to answer questions or to otherwise provide explanations that involve any concrete details? In fact, it looks like you specifically avoid concrete details like they were some kind of a taboo. Why is that? Let's try this again; a simple concrete question:
What kind of main blade is installed on what you called the "1973" auction knife?
Clearly, any person can give one of the following three answers: 2.4mm, 2.7mm or "I don't know." What is your answer? I'm guessing that you will not be willing to answer this question. Prove me wrong. ::)
P.S. Since you seem to like communicating this way, I attach images of two of my SAKs. Can you see what I mean? :D


-
That’s nuts. You’re essentially challenging me to answer my own question.

-
And the that super knife looks like c.’75. And not gonna ask for more pics of that one ‘cause we both know how that goes. Clearly from before the “1973” knife in question. But I’m sure you’ll doubt something there too. ;)
-
Hello guys! Happy 2021!
Here is another SAK, also claimed to be from 1973, same seller, but in this case, the featured "Modeler" has a Clip-Point, the VICTORIA stamp and five turns cork screw:
-
@MexSAK said:
Hello guys! Happy 2021!Here is another SAK, also claimed to be from 1973, same seller, but in this case, the featured "Modeler" has a Clip-Point, the VICTORIA stamp and five turns cork screw:
Wow. I have never seen one that old, and I watch most Modeler auctions as its one of my favorite models. I would love to see it with the scales off to see if its real, or a repair/mod of a similar vintage Champion. You know that Victorinox was making mag glass knives in the early 70s "Victoria" era, so its not unheard of that this is a real thing. But this is the first time I've ever seen one. Until this the only Victoria-era mag glass knives I've seen are Passengers, Explorers, and Champions.
-
Hi Jazzbass, you're right about the scales. One day I finally found the Champion with old tools, VOS stamp and a magnifying glass / Phillips but when I removed the scales I found it was reriveted. As for the c.1973 Modeler, one similar was shown by German collector a few years ago and I saved a couple of photos.


-
Why would someone remove the scales from a 1970s SAK in order to verify anything? The scales would get damaged in the process, didn't they? There should be any other ways to make sure that it is -or not- a MODED SAK... Please share ;)
-
@MexSAK said:
Why would someone remove the scales from a 1970s SAK in order to verify anything? The scales would get damaged in the process, didn't they? There should be any other ways to make sure that it is -or not- a MODED SAK... Please share ;)Some folks can tell, I started a topic about this very question:
/post/1430680 -
@jnoxyd said:
As for the c.1973 Modeler, one similar was shown by German collector a few years ago and I saved a couple of photos.

That's cool - thanks for sharing. I like to see several of these in the wild before assuming they're real. It's reasonable to think they'd make several runs of different tool combos as they were expanding the line by in 73-74. Until this, though, the earliest Modeler I've ever seen was early 80s.
@MexSAK said:
Why would someone remove the scales from a 1970s SAK in order to verify anything? The scales would get damaged in the process, didn't they? There should be any other ways to make sure that it is -or not- a MODED SAK... Please share ;)You can remove the scales without damage if you get them warm. These early 70s scales are a challenge because the plastic itself is not very stable (observe how the ends are curling up - super common with knives from this era). I did this on an early 90s Yeoman I found years ago that had a pen blade in place of the combo tool. Its the only one I've ever seen and I was 90% sure it was a mod and not factory. Pulled the scales and to my surprise - factory rivets. It's either a mistake that slipped through QC, a low volume custom order or a test idea for a new model that got sold off.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login