NOT pleased with leatherman
-
@Leatherman123 said:
GUESS WHAT, I CAN'T RETURN IT TO LM BECAUSE I HAVE SENT 6 CHARGE'S BACK DUE TO MANUFACTURING DEFECTS LIKE PLAY IN LINER LOCKS!!Perhaps you could have a friend send it in under his name then? ;) >:D
-
@Leatherman123 said:
**The same goes with the LM Juice's! **BTW, the LM Skeletool CX has amazing "fit and finish". It screams quality!
Funny you say that. Yesterday I was marveling at the snap on my CS4. I don't like how the saw/awl function together, but it's dealable. The backsprings are really amazing.
-
Just think about it this way: Price = Materials+Workmanship
I can't believe that I don't recall that from my accountancy qualifications and years of business experience. ::)
LOL. Sorry for the simpleton explanation. :D
Maybe LM should just change the features list for the Charge to match it (and put an end this discussion):
a) Ergonomic, titanium-scales - moves around during use to conform to the shape of your palm/hand.
b) Self-wearing diamond file - gone before you know it.
c) Play-full tool selection.
d) Tough on everything else. Including your wallet.::)
-
Oooh now you've done it. :ahhh

-
well... maybe if they start manufacturing them in China you might see quality control start to even out more. :P
-
@Sean said:
well... maybe if they start manufacturing them in China you might see quality control start to even out more. :PMaybe be cheaper as well :)
seriously though, what isn't made in china these days. I defy you to look around you and not find a chinese made product. My Dell mouse and keyboard - Chinese. Remote controls, cell phone even microsoft xbox 360 controller all made in china, it boggles the mind ???
-
well... maybe if they start manufacturing them in China you might see quality control start to even out more. :P
Maybe be cheaper as well :)
seriously though, what isn't made in china these days. I defy you to look around you and not find a chinese made product. My Dell mouse and keyboard - Chinese. Remote controls, cell phone even microsoft xbox 360 controller all made in china, it boggles the mind ???
Pure business. Labor costs, regulatory costs, environmental costs, ease of scaling up or down manufacturing, all much easier in China. But not without a downside.
However, as fuel costs go up, these things will level out. When it costs more to ship a tool than it did to manufacture it, then it starts to make sense to move manufacturing closer to the market. Then again, that doesn't assure better quality. Corporate climate is what leads to better quality.
-
@Mr. Whippy said:
well... maybe if they start manufacturing them in China you might see quality control start to even out more. :P
Maybe be cheaper as well :)
seriously though, what isn't made in china these days. I defy you to look around you and not find a chinese made product. My Dell mouse and keyboard - Chinese. Remote controls, cell phone even microsoft xbox 360 controller all made in china, it boggles the mind ???
Pure business. Labor costs, regulatory costs, environmental costs, ease of scaling up or down manufacturing, all much easier in China. But not without a downside.
However, as fuel costs go up, these things will level out. When it costs more to ship a tool than it did to manufacture it, then it starts to make sense to move manufacturing closer to the market. Then again, that doesn't assure better quality. Corporate climate is what leads to better quality.
Well said Mr. W

-
well... maybe if they start manufacturing them in China you might see quality control start to even out more. :P
Maybe be cheaper as well :)
seriously though, what isn't made in china these days.
Leatherman Tools? ;)
I still don't buy the "LM QC sucks" argument, and I think I see where the different opinions are formed - in individual expectations.
To my mind, good QC really means making sure that the product (in this case the tool) is fit for purpose and within tolerance for things like aesthetics etc. It seems that many people here place high priority on the latter, whereas I don't as the former is far more important to me.
Thinking back to the car analogy used earlier in the thread, I don't see tools and cars as comparable really. Maybe a better anology would be something like a broom? As long as it's functional, robust and I'm not going to get splinters from using it, I really couldn't care less whether the varnish was applied to the handle evenly. I reckon some of you lot would be apoplectic!! :D
Shininess, clickiness whatever aren't important to me at all really, although, as I've said a number of times on here, I do enjoy pawing the Swisstool & Spirit from time to time, but let's be honest, it makes bugger all difference to the intended use of the tool does it?
Some of the things listed are genuine problems, but mostly it's grumbles about things that really don't matter to most users of tools I would suggest.
In summary, rather than being poor - it's more likely that Leatherman's QC is based on what their customers *generally *consider to be important, not what you guys see as important.
-
@DaveK said:
In summary, rather than being poor - it's more likely that Leatherman's QC is based on what their customers *generally *consider to be important, not what you guys see as important.I think this would be the case. I'm willing to bet 99.9% of the tools Leatherman sells are opened and then successfully put into service as a tool. I'm guessing they don't factor in the people buying them to be displayed in a glass case.
-
Yeah we forget ppl use them sometimes I guess
:D -
From my POV there are two types of issues: (a) cosmetic/aesthetic "blemishes", such as machining marks or fuzzy lettering on the Ti scales, raw blade hole edges, etc, and (b) real-use issues, such as faulty linerlocks, plier head or file rubbing against handles, etc. If the tool is to be put in a glass case then you only care for (a)-type things; else, (b)-type problems come to haunt you. Overgeneralizing and stating that "these are all cosmetic stuff" or "these all get in the way when using the tool" are both wrong. Assuming they should be caught during QC checks, on the other hand, is a fact.
That said, QC slippage is not a LM-only thing. I've also had QC issues with Gerbers and Vics. As Dave said, it's the user expectations that are very high for a hyped-up/probably overpriced tool such as the TTi. However, what counts the most for me is that LM will always stand behind their customers (even via less-than-perfect reps) and in the end the tools they manufacture are all top notch no matter what. My older Ti has been "serving" along a certain totally tool-hostile marine officer for the last couple of years and, besides the occasional surface rust, it has pulled through just fine. My current TTi has all sorts of QC issues (including file rubbing, linerlocks not fully engaging, scales not perfectly aligned, etc.), yet it is still my go-to tool when I feel like carrying something heavier/more "tactical" than my EDC Spirit.
-
As I see it the Charge series is promoted as LM's "High-End" Tools. Their functions can be found in other LM products, but anyway they make the Charge with Titanium scales, ect... These pictures/text from the brochure shouts Quality very loud, and I wouldn't expect anything than perfect craftmanship/F&F, paying so much money for one...
(But that just me...) ;)
Keep in mind the legal 2HO costs 325$ here NIB & 280$ with "Discount".. :P :ahhh
-
Noth - I think you've just proved my point, which I know is really going to bug you :D
In what way is the file rubbing against the handle a "real-use", the (b) issue? It doesn't inhibit the use of the tool, and as far as I can tell doesn't cause damage to either the handle or the tool, so surely that's a type (a)?
The answer to the above is totally irrelevant btw, but I'm curious whether runs in the varnish on a broom handle would bother you? ;)
For the record, it doesn't bother me in the slightest, in fact it may prevent rattling or vibration when carrying the tool, so it might even be useful.
-
@DaveK said:
Noth - I think you've just proved my point, which I know is really going to bug you :D:D No bugging my friend (plus, I'm an expert in debugging... ::) :D). I consider the file rubbing against the handle a use issue because over time the last half cm of the file seems to have "discolored" and lost its abrasiveness, compared to the rest of it. That's even more so as the file rubs against the handle not only when opening/closing but also when I squeeze the handles in my hands during cutting/sawing. Considering how some people need a file that extends all the way to the tip of the implement this could be an issue, hence type (b). Note that a blade rubbing against the handles is still type (a) in my book as it only affects the face of the blade (although some people may consider it bad, making the blade less corrosion resistant due to a less than polished finish etc).
-
Ah I'm with you. Yes, if it was damaging the file then I would agree with you on that.
-
This is my 1000th post. Officially a no lifer :(
This all comes down to expectations. The Charge series have slightly different tool sets (extra bit driver, gut hook, better grade blade steel) than the Wave. It's like a high performance version. I view the scale materials as one would the bodywork on a car. Sleeker design, more exotic materials.
If one bought a Charge as a higher "performance" (or more specialized) version of a Wave, I don't think the blemishes will bother you. If you bought it in "collector" model (ie it's a thing of beauty to enjoy forever) then the standard, off the manufacturing run TTi will disappoint.
This is analogous, I think, to car collectors. If you've ever been to a collector's show, the vehicles on display are much cleaner examples than you could ever get from the dealer. Better paint, nuts and bolts pristine, body panels more perfectly matched, upholstry perfect.
Yes, you can go through and examine multiple cars to get the nicest example at the dealer, but it still won't match a show car. If you bought one sight unseen, it is likely to be less perfect than the hand picked one.
That said, it will still perform as designed.
OTOH, I recently succumbed and bought a Damascus Wave. I do expect that to arrive in collector condition, and if it isn't, I'll send it back--my expectation is, a limited run edition (that doesn't appear to have the same 25 year warranty) better be perfect in all respects when it reaches my hands--especially since it appears Leatherman expects this won't be my EDC user tool.
Woohoo! One thousand posts in 6 months. :ahhh
-
Mr. W, wow! Congratulations! ;)
A look at the tti and most would consider it a premium tool from Leatherman, at least the price certainly reflects that. Few would dispute the quality and function of it. It's just disappointing for some who have shelled out that premium price for a tool that has a bit of shoddy quality control in some instances that might have been overlooked. If it was a cheaper price maybe not much would be said about it. This tool up here in Canada, the new batch coming in will run you about $150.
Damn rights the Damascus better be flawless. :D -
the file rubbing not only wears down the file, but the inside of the scales get worn, resulting in shavings in your tool that will get into the other joints if not cleaned.
-
@Mr. Whippy said:
OTOH, I recently succumbed and bought a Damascus Wave. I do expect that to arrive in collector condition, and if it isn't, I'll send it back--my expectation is, a limited run edition (that doesn't appear to have the same 25 year warranty) better be perfect in all respects when it reaches my hands--especially since it appears Leatherman expects this won't be my EDC user tool.I would agree. Anything sold with the intent that it shouldn't be used and is for collecting purposes only should have a much higher degree of finish.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login