The Angler's Club
-
I don´t need a scaler but I do need both pliers and scissors when fishing.
However, neither the Angler nor the Fisherman provides both.
Therefore I put the fish scales on my Handyman.
-
I think the most useful part of the fish scaler is the hook disgorger. (While fishing). The measuring marks come in handy for multiple other purposes.
Has anyone actually managed to have much luck truly scaling fish with a fish scaler? Mightn't the wood saw be quicker and more effective?
-
@Jim the Brave said:
I think the most useful part of the fish scaler is the hook disgorger. (While fishing). The measuring marks come in handy for multiple other purposes.Has anyone actually managed to have much luck truly scaling fish with a fish scaler? Mightn't the wood saw be quicker and more effective?
The scaler works...barely.
When I was a kid, I used a bottle cap. I’d punch a hole in it with my reamer (on my Champion) and screw it to a stick. It worked great. I carried a couple of screws for this in my tiny tackle box.
The saw would work, but the BACK of the saw would work better. You’d just have to be careful not to close it on your hand.
-
I've never done a ton of fishing, but I've never felt that fish scalers did the trick. Always ended up using something else, like the back edge of a knife blade or something. I wonder if the saw teeth might work on some with more pervasive scales.
-
Looking forward to this Angler arriving.
The seller didn't open the tools, so it is a mystery at the moment. Should know the condition by end of week.
-
@Jim the Brave said:
I've never done a ton of fishing, but I've never felt that fish scalers did the trick. Always ended up using something else, like the back edge of a knife blade or something. I wonder if the saw teeth might work on some with more pervasive scales.I've always used the back of a knife blade too. I got a cheap bait knife, from a closeout, and it works great,
The only thing I use the scailer blade for is the hook remover -
@FolderBeholder said:
Looking forward to this Angler arriving.
The seller didn't open the tools, so it is a mystery at the moment. Should know the condition by end of week.Nice find, Fobe!

-
After I first read this thread I got to thinking that Victorinox absolutely needs a knife that has pliers, scissors and a scaler/hook remover blade,
I'm thinking about getting a champ and removing the saw and magnifying glass. Id even bet it's something I could even do. -
You absolutely could, and there's plenty of people here who knows how to. Check out the Modder section too!
-
Checking prices on the eBay and realized how much they've gone up on used champs, lately. I actually think it'd be fairly easy to cut the pins right below the liner and simply remove the unneeded layers and re peen the pins.
That being said, y'all realize that I'm a stingy old guy, right?I went rummaging through my old knife cases this morning and found one of my old fishin' knives and that a long with the Gerber Dime from last months challenge will suit me fine until I find the right project piece.
2 knife blades,
Pliers,
Scissors,
Screwdrivers,
2 bottle openers.I about forgot about the package opener too.


-
Fishing is why my son got me my Dime. It's a great fishing tool and a lot easier to clean up too!
-
Wanting to see how a champ mod may look, I got this knock off SAK for free from the Temu. Crappy rendition but it was free.
[attach id=0 msg=2546513]
Doesn't look too bad at first glance. The characteristic scissors hump found on many Chinese SAKs is absent.
[attach id=1 msg=2546513]
Looking down, the tolerances are definitely not there.
[attach id=2 msg=2546513]
The scales were simply glued on and the pins were peened onto the liners.


-
Houston, we have a problem...
Unlike a Victorinox, this SAK-a-like was put together with peened pins on both sides. So after grinding them out I was left picking up the pieces.
In more way than one.[attach id=0 msg=2546515]
Using diagrams from the Internet, I'm in the process of trying to assemble it back into a useable form. The major drawback is the springs are only rudimentarily
Similar to a Vic.I'll post a pic when I get all the blasted pins lined up with the intended holes .
Or IF I get them lined up . ¯\_( ͡° ͜ʖ ͡°)_/¯

-
Did you receive it with that bend in the tweezers?
-
That was fresh out of the box, Farmer.
Progress report.
As the pins were bent, I'm assuming during the assembly at the Chinese SAK alike factory as I can't bend them by hand, I'm up to the last liner.
I'm close...
I'd have liked to do away with all the back tools but don't have the necessary springs to have made it happen. It's getting nearly ready. I'm thinking that a true Victorinox Champ would have been much easier to reassemble but the experience with this one is priceless. I know that I've got some old SAK copies around here, somewhere, that must be over 50 years old. I might have to dig some of them out and see how the build quality was back then.Hopefully I'll have some pics of the final build later today.
-
That Chinese Champ looks a lot better than my Dollar Tree messterpiece with the humpy scissors. After I pried off the scales, I think I would have reached for the stuper glue and put 'em back on. Trying to put that thing back together wouldn't be my idea of having fun. The knife makers over there are certainly capable of making a really good grade SAK copy, if they choose. Taking the Ruike as an example.
Let us know how the project proceeds. Best wishes. G
:) -
Pre-bent tweezers...
Just goes to show how good the real deal is.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


