One Eleven 'n One Twenty-one
-
@Barry Rowland said:
Day 2: I have to say that the belt cutter makes an excellent small blade! In this pic, I'm using it to open a package of mozzarella cheese sticks. This blade is more useful than I thought it would be. More to follow!Interesting; I miss the 91 mm's small blade already. Too bad Vic doesn't seem to combine it with scissors this side of a Workchamp XL.

-
That's the use I'm putting it to, Simon. I haven't measured it yet, but I'd guess the blade lengths are similar. I have the Swisstool RS for work. Up to this point, the belt cutter hasn't seen any use. Now I'm looking forward to trying it out. The serrations are identical to the Trekker blade's. -
@SurgeUk said:
That's the problem EB. The Rescue Tool was primarily bought, not issued, for my SAR stuff (voluntary role, not work) This means that outside my house/garden I would need to rely upon the UK "reasonable excuse" defence (i.e. SAR stuff on a live call out or organised exercise etc)I can carry other stuff whilst on duty (i.e. my Surge, lock knife, baton etc) because I have "lawful authority" as they are issued by the UK Government. I have ministerial exemptions in place for these (and other things such as firearms etc) as I am a "Crown Servant"
Essentially, in the UK, you can carry a non-locking blade under 3 inches (7.62cm) without needing a reason, notwithstanding criminal intent etc. However, ANY locking blade (regardless of length) requires either "Lawful Authority" <u>OR</u> "Reasonable Excuse" and, the onus is upon me to provide proof of either.
*However, unlike most of europe, OHO is not an issue (unless it's a locking blade OR over 3 inches) Both my knives fall foul on each account, unless either statutory defences apply.
*
Clear

(Sorry if that was an egg sucking exercise, but I don't know, what you know, about our messed up system :D )
Clear as mud
nothing wrong with brushing up on the regulations.I work, commute through, and live in three different jurisdictions. So it matters where I am when I get arrested.
Years ago we had similar reasonable justification rules that applied to my old line of work. At this point, I don't even know what rules that apply. But I'm pretty sure the blade length exceeds the limit in one of the three jurisdictions I frequent. -
@munsonhsr said:
Day 2This probably should have been my Day 1, but I opened a package yesterday and couldn't pass up the photo opp. Anyway, here are the pens that I will be using this month for the next 29 days.
Have a great Saturday everyone. I am enjoying all of your photos.

Really like the way you’ve shown the different tools, reminds me of the evolution of man
although not sure the saw would be the most evolved tool 
Probably just me
-
111mm Day 02 (bonus scissor action):

-
Day 2
A little package opening using the Outrider

-
Day 2:
No real use today. Went out to Olive Garden with the family for dinner. Man that was good!!!
Carried my Centurion with modded scales. I used the scales off of my OH Sentinel because of the pocket clip. I had to make a cutout for the phillips driver.



Sent from my iPhone using Tapatalk
-
DAY 3
I used everything but the awl on my Dual Pro X between EDC and fitting a new lockset (replacing one I really messed up after an incident with a soft brass key, a heavy box, and me forgetting to take it out of the inside-opening door) on the outbuilding. I cut open some medicine and a package containing new razor blades with the PE blade. The belt cutter got used to cut the plastic ring to get a root beer removed from a six-pack and Mr. Clean Magic Eraser in half (which was used to remove slight tape residue on the belt cutter, and heavy residue on the GAK). Then, when I installed the new door lockset, I used the backside Phillips, and then the can opener when I misplaced my screwdriver (still can't find it!), as well as the cap lifter to pry an adapter piece out of the inside knob that I didn't need for the door I was working on. I would have used the awl, but I instead chose to use the original plate that goes on the door frame.
Misplaced the Dual Pro, so let's go onto the Outrider's use. Some slight cutting, and the lanyard ring to hold the keys to this new lockset until I could stash the spare and put the regular key on my regular keys replacing the busted off one to the old lockset.
-
:D
-
I used everything but the awl on my Dual Pro X between EDC and fitting a new lockset (replacing one
Misplaced the Dual Pro, so let's go onto the Outrider's use. Some slight cutting, and the lanyard ring to hold the keys to this new lockset until I could stash the spare and put the regular key on my regular keys replacing the busted off one to the old lockset.
Great uses cody!

-
@FolderBeholder said:
Don't leave us in suspense!
:DA pair of Farmer X.

-
@Nix said:
111mm Day 02 (bonus scissor action):
What is being made?
No real use today. Went out to Olive Garden with the family for dinner. Man that was good!!!
Carried my Centurion with modded scales. I used the scales off of my OH Sentinel because of the pocket clip. I had to make a cutout for the phillips driver.



Sent from my iPhone using Tapatalk
Nice job
I used everything but the awl on my Dual Pro X between EDC and fitting a new lockset (replacing one I really messed up after an incident with a soft brass key, a heavy box, and me forgetting to take it out of the inside-opening door) on the outbuilding. I cut open some medicine and a package containing new razor blades with the PE blade. The belt cutter got used to cut the plastic ring to get a root beer removed from a six-pack and Mr. Clean Magic Eraser in half (which was used to remove slight tape residue on the belt cutter, and heavy residue on the GAK). Then, when I installed the new door lockset, I used the backside Phillips, and then the can opener when I misplaced my screwdriver (still can't find it!), as well as the cap lifter to pry an adapter piece out of the inside knob that I didn't need for the door I was working on. I would have used the awl, but I instead chose to use the original plate that goes on the door frame.
Misplaced the Dual Pro, so let's go onto the Outrider's use. Some slight cutting, and the lanyard ring to hold the keys to this new lockset until I could stash the spare and put the regular key on my regular keys replacing the busted off one to the old lockset.
Sounds like a busy day for awl.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
