One Eleven 'n One Twenty-one
-
111mm Day 02 (bonus scissor action):

-
Day 2
A little package opening using the Outrider

-
Day 2:
No real use today. Went out to Olive Garden with the family for dinner. Man that was good!!!
Carried my Centurion with modded scales. I used the scales off of my OH Sentinel because of the pocket clip. I had to make a cutout for the phillips driver.



Sent from my iPhone using Tapatalk
-
DAY 3
I used everything but the awl on my Dual Pro X between EDC and fitting a new lockset (replacing one I really messed up after an incident with a soft brass key, a heavy box, and me forgetting to take it out of the inside-opening door) on the outbuilding. I cut open some medicine and a package containing new razor blades with the PE blade. The belt cutter got used to cut the plastic ring to get a root beer removed from a six-pack and Mr. Clean Magic Eraser in half (which was used to remove slight tape residue on the belt cutter, and heavy residue on the GAK). Then, when I installed the new door lockset, I used the backside Phillips, and then the can opener when I misplaced my screwdriver (still can't find it!), as well as the cap lifter to pry an adapter piece out of the inside knob that I didn't need for the door I was working on. I would have used the awl, but I instead chose to use the original plate that goes on the door frame.
Misplaced the Dual Pro, so let's go onto the Outrider's use. Some slight cutting, and the lanyard ring to hold the keys to this new lockset until I could stash the spare and put the regular key on my regular keys replacing the busted off one to the old lockset.
-
:D
-
I used everything but the awl on my Dual Pro X between EDC and fitting a new lockset (replacing one
Misplaced the Dual Pro, so let's go onto the Outrider's use. Some slight cutting, and the lanyard ring to hold the keys to this new lockset until I could stash the spare and put the regular key on my regular keys replacing the busted off one to the old lockset.
Great uses cody!

-
@FolderBeholder said:
Don't leave us in suspense!
:DA pair of Farmer X.

-
@Nix said:
111mm Day 02 (bonus scissor action):
What is being made?
No real use today. Went out to Olive Garden with the family for dinner. Man that was good!!!
Carried my Centurion with modded scales. I used the scales off of my OH Sentinel because of the pocket clip. I had to make a cutout for the phillips driver.



Sent from my iPhone using Tapatalk
Nice job
I used everything but the awl on my Dual Pro X between EDC and fitting a new lockset (replacing one I really messed up after an incident with a soft brass key, a heavy box, and me forgetting to take it out of the inside-opening door) on the outbuilding. I cut open some medicine and a package containing new razor blades with the PE blade. The belt cutter got used to cut the plastic ring to get a root beer removed from a six-pack and Mr. Clean Magic Eraser in half (which was used to remove slight tape residue on the belt cutter, and heavy residue on the GAK). Then, when I installed the new door lockset, I used the backside Phillips, and then the can opener when I misplaced my screwdriver (still can't find it!), as well as the cap lifter to pry an adapter piece out of the inside knob that I didn't need for the door I was working on. I would have used the awl, but I instead chose to use the original plate that goes on the door frame.
Misplaced the Dual Pro, so let's go onto the Outrider's use. Some slight cutting, and the lanyard ring to hold the keys to this new lockset until I could stash the spare and put the regular key on my regular keys replacing the busted off one to the old lockset.
Sounds like a busy day for awl.
-
@SurgeUk said:
That's the problem EB. The Rescue Tool was primarily bought, not issued, for my SAR stuff (voluntary role, not work) This means that outside my house/garden I would need to rely upon the UK "reasonable excuse" defence (i.e. SAR stuff on a live call out or organised exercise etc)I can carry other stuff whilst on duty (i.e. my Surge, lock knife, baton etc) because I have "lawful authority" as they are issued by the UK Government. I have ministerial exemptions in place for these (and other things such as firearms etc) as I am a "Crown Servant"
Essentially, in the UK, you can carry a non-locking blade under 3 inches (7.62cm) without needing a reason, notwithstanding criminal intent etc. However, ANY locking blade (regardless of length) requires either "Lawful Authority" <u>OR</u> "Reasonable Excuse" and, the onus is upon me to provide proof of either.
*However, unlike most of europe, OHO is not an issue (unless it's a locking blade OR over 3 inches) Both my knives fall foul on each account, unless either statutory defences apply.
*
Clear

(Sorry if that was an egg sucking exercise, but I don't know, what you know, about our messed up system :D )
Any tome I think US knife laws are restrictive, I just think of what you and others in different countries have to deal with.
@ElevenBlade said:
Clear as mud
nothing wrong with brushing up on the regulations.I work, commute through, and live in three different jurisdictions. So it matters where I am when I get arrested.
Years ago we had similar reasonable justification rules that applied to my old line of work. At this point, I don't even know what rules that apply. But I'm pretty sure the blade length exceeds the limit in one of the three jurisdictions I frequent.The varying of knife (and other weapons/tools) from one area to another is one of the major problems I find with a lot of laws. The other major problem is the intentional ambiguity.
I remember having a conversation about different state “weapon” laws with a couple associates on one occasion. One woman thought I was lying to her when I started telling her different laws she was violating on her travels from Virginia to Rhode Island with items she normally carried in her person.
-
Day 2
Busy couple of days around here! My mother had a sleepover with my girls New Year’s Eve, she had a little fall yesterday playing. So here’s an action photo and an “un-glamour” shot of me putting together and putting on the new higher toilet seat for her.
Using my youngest daughters BYSAK.

-
Also - I’m definitely on the “corkscrew” side of the debate. I used the Phillips to put the first 2 screws in, mostly as a novelty, but switched to the can opener for the last 2. To me there’s no debate - I prefer the can opener to the Phillips anyways, and anytime I think I’ll need more I’ve got a dedicated screwdriver handy. I don’t drink wine much anymore, but the corkscrew on my SAK has opened plenty of good memories in its day!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
although not sure the saw would be the most evolved tool 
