What did you use your Sak on today?
-
Had the Ranger helping me with building a work bench in the garage. Used the main blade for opening some new tools and packages, making some cutting guides for the very thin flush saw, rounding some inside corners, and sharpening my pencil. Also used the wood saw for some little trims here and there, as well as the file on the metal saw for touch-ups.
And because I know this forum likes tools and projects, I've thrown in some photos of some of my tools used (I quite like Irwin these days!) and the nearly finished bench. Quality control cat is still inspecting. The only power tool I used was a drill -- everything else done by hand (lot of hand sawing).
-
Good work, Altis! I hope it passes the CAT scan and is deemed fit for work!

-
Screws loosened in patio heater top deflector. Wind storm blew two sections of the heat deflector/rain cover off. Fortunately I now carry two SAKs: new Cyber Tool L from Santa and my old Swiss Champ. This lets me plier a nut and drive a screw on the other side with inline Phillips. Mission accomplished. Life is good, despite on-going indefinite idiocy of clown world. Tool chest increasingly just gathering dust!

-
Double SAK action! :ahhh
-
@SgtTowser said:
Screws loosened in patio heater top deflector. Wind storm blew two sections of the heat deflector/rain cover off. Fortunately I now carry two SAKs: new Cyber Tool L from Santa and my old Swiss Champ. This lets me plier a nut and drive a screw on the other side with inline Phillips. Mission accomplished. Life is good, despite on-going indefinite idiocy of clown world. Tool chest increasingly just gathering dust!good one sarge, I may try the Champ if sh** gets crazier...
-
Nix,
I’m retired, so I get to wear Carhartt, Duluth trading company, 511, and Rail Ryder pants every day. This alone makes retirement worth not having killed myself years ago. Long zipper fly. Deep heavy pockets. Duck that feels good on my hairy legs. A knife pouch for my flipper. And a 91 SAK at the bottom of each pocket. I feel like two gun Pete. No matter which hand I’m using, my free hand can get to a SAK. Sounds eccentric, and I set off metal detectors, but...
I know, it’s only SAK and roll/
But I like it, like it, yes, I do!Have a happy new year!
P.S.: Still love Filson, but the designer prices just don’t make sense.
-
Tony Sal
Take the plunge

-
Used the Esquire's scissors to cut black strapping at work today.....
Been carving/whittling a bit with the Spartan on some box elder wood--borrowed my daughter's Huntsman to use the saw....kind of excrutiating to make those cuts, but made it through. Keep wondering how I would know if one of the saws became dull, and how I would sharpen it, if possible....


-
For cutting wood, I guess you could fill one, but I've never seen it done. Just my .02, but I carried nothing but a Huntsman for 32 years and never dulled mine.
-
Yeah I'm not sure this one is dull....just seemed kind of hard to cut, and box elder is quite a soft wood.
-
That is strange Jim. They're usually pretty wicked cutters for their size. Pick up a Trekker when you can. Nice big 111mm version of that saw. It'll cut like a champ!
-
WoW!! Great "uses" ALL !!!

-
Combo tool to open a can and Sportsman corkscrew to open a wine.


Enviado de meu moto g(6) usando o Tapatalk
-
Been using my SAK's today to open....my inventory as it rolls in, mostly used SAK's......
-
@Jim the Brave said:
Used the Esquire's scissors to cut black strapping at work today.....Been carving/whittling a bit with the Spartan on some box elder wood--borrowed my daughter's Huntsman to use the saw....kind of excrutiating to make those cuts, but made it through. Keep wondering how I would know if one of the saws became dull, and how I would sharpen it, if possible....
I once bought a used Camper with a dull saw. It should feel sticky sharp to the touch, and you should see no flat shiny spots when held under a light. I used a small, triangular shaped stone. The edges were marked up with a black permanent marker so I could see what was being stoned. It was an evening of tedium but I succeeded. A year later, Felix put out this video. Hope this helps.
-
@WolfyW said:
I once bought a used Camper with a dull saw. It should feel sticky sharp to the touch, and you should see no flat shiny spots when held under a light. I used a small, triangular shaped stone. The edges were marked up with a black permanent marker so I could see what was being stoned. It was an evening of tedium but I succeeded. A year later, Felix put out this video. Hope this helps.An SAK community treasure, is Felix!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





