What did you use your Sak on today?
-
@nolongerlurking27 said:
Also the main blade was borrowed by a friend to cut some Swiss role she had brought in.

Man, too bad she didn't just borrow the whole knife!
-
So today, I used my Spartan's unfavored bottle opener attachment to gingerly reconfigure my bandsawmill blades in their box. They had gotten out of wonk in a dangerously smurfworthy manner, and I had to put them back in wonk ( wait, is that a thing?
) so I could close the box again. Naturally I didn't want one of those blades to spring out of there and lacerate me, so I very cautiously pried them back down in to snuggle together the way they came from the factory.Note--the picture was taken AFTER I and the Spartan caused the unwonky blades to behave. Also, the blades are teeth-side-down in the box, in case you were naturally wondering where the vicious gashworthy teeth were.

-
Found a job for my lately little-used Trailmaster today at work: slicing off the matted roots of shrubs I was trimming that had grown through the bottoms of their pots.
-
Just for chilling with some weißbier.

-
I used Spartan's bottle opener today, too. To unscrew a hose clamp on the drain pipe of my kitchen sink.
Side note: 2020 threw everything at me including the kitchen sink. Which clogged up on New Year's Eve Day. I worked on it today.
I also used can opener to open plastic package of the new set of channel locks I bought to deal with the plumbing.
So you see I used both openers in one day. That's impressive, for me anyway.
-
@Jim the Brave said:
I used Spartan's bottle opener today, too. To unscrew a hose clamp on the drain pipe of my kitchen sink.Side note: 2020 threw everything at me including the kitchen sink. Which clogged up on New Year's Eve Day. I worked on it today.
I also used can opener to open plastic package of the new set of channel locks I bought to deal with the plumbing.
So you see I used both openers in one day. That's impressive, for me anyway.
Man, I hate dealing with plumbing problems. I live in a 50 year old house, so I have my share. :-\
-
Had the Ranger helping me with building a work bench in the garage. Used the main blade for opening some new tools and packages, making some cutting guides for the very thin flush saw, rounding some inside corners, and sharpening my pencil. Also used the wood saw for some little trims here and there, as well as the file on the metal saw for touch-ups.
And because I know this forum likes tools and projects, I've thrown in some photos of some of my tools used (I quite like Irwin these days!) and the nearly finished bench. Quality control cat is still inspecting. The only power tool I used was a drill -- everything else done by hand (lot of hand sawing).
-
Good work, Altis! I hope it passes the CAT scan and is deemed fit for work!

-
Screws loosened in patio heater top deflector. Wind storm blew two sections of the heat deflector/rain cover off. Fortunately I now carry two SAKs: new Cyber Tool L from Santa and my old Swiss Champ. This lets me plier a nut and drive a screw on the other side with inline Phillips. Mission accomplished. Life is good, despite on-going indefinite idiocy of clown world. Tool chest increasingly just gathering dust!

-
Double SAK action! :ahhh
-
@SgtTowser said:
Screws loosened in patio heater top deflector. Wind storm blew two sections of the heat deflector/rain cover off. Fortunately I now carry two SAKs: new Cyber Tool L from Santa and my old Swiss Champ. This lets me plier a nut and drive a screw on the other side with inline Phillips. Mission accomplished. Life is good, despite on-going indefinite idiocy of clown world. Tool chest increasingly just gathering dust!good one sarge, I may try the Champ if sh** gets crazier...
-
Nix,
I’m retired, so I get to wear Carhartt, Duluth trading company, 511, and Rail Ryder pants every day. This alone makes retirement worth not having killed myself years ago. Long zipper fly. Deep heavy pockets. Duck that feels good on my hairy legs. A knife pouch for my flipper. And a 91 SAK at the bottom of each pocket. I feel like two gun Pete. No matter which hand I’m using, my free hand can get to a SAK. Sounds eccentric, and I set off metal detectors, but...
I know, it’s only SAK and roll/
But I like it, like it, yes, I do!Have a happy new year!
P.S.: Still love Filson, but the designer prices just don’t make sense.
-
Tony Sal
Take the plunge

-
Used the Esquire's scissors to cut black strapping at work today.....
Been carving/whittling a bit with the Spartan on some box elder wood--borrowed my daughter's Huntsman to use the saw....kind of excrutiating to make those cuts, but made it through. Keep wondering how I would know if one of the saws became dull, and how I would sharpen it, if possible....


-
For cutting wood, I guess you could fill one, but I've never seen it done. Just my .02, but I carried nothing but a Huntsman for 32 years and never dulled mine.
-
Yeah I'm not sure this one is dull....just seemed kind of hard to cut, and box elder is quite a soft wood.
-
That is strange Jim. They're usually pretty wicked cutters for their size. Pick up a Trekker when you can. Nice big 111mm version of that saw. It'll cut like a champ!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




