What did you use your Leatherman for today?
-
Nice job, RP.

If it only came from LTG like that but, alas, it will take some of the Free's and Wave's sales and probably that wouldn't be good for them.

-
We've discovered rats in a cavity wall. My BO surge has been used to cut through plasterboard and set traps and fitting a sewer valve. It needs a serious clean!
-
Used Vix Work Champ and a LM Signal to make a power extension cord.
Of course, it all starts with that beloved long Phillips for the outlet disassembly

Than a knife and a cap lifter for stripping those wires

Then pliers for crimping

Phillips again to put those wires in place

I needed to cut the wire, so Signal wire cutters came in handy. Did the job, but the wire slipped out of them due to it’s thickness

Here’s the final result

-
Nice, alexanderre!

I used my Leatherman Surge several times while making this PVC sharpening jig. The Surge is featured in the video below the pic a couple times.

-
Good ingenuity!

-
Good job on both the angle sharpener and belt clip, PiOT; I think I'll copy it!

-
Thanks guys

-
Great ideea.
Well, as i had to sell my Leathermans, trusty lone Squirt is there in my small projects. Used ot to cut in half a 1m brass rod, for easier transportation
-
I used my Crunch to help take apart my crusty Dollar Micra.

Here it is finished

Sent from my iPad using Tapatalk
-
Good use of the ziptie as well

Badge worthy :D
-
I Ike to zipping a wrench on other wise I am forever dropping the wrench. After I get the screws broken lose I to use these engineer pliers. They work great! engineer pliers japan
-
Used the Supertool pliers to carry the ash bin outside again. With the temps down, we're burning thru the pellets.
-
@Barry Rowland said:
Used the Supertool pliers to carry the ash bin outside again. With the temps down, we're burning thru the pellets.Just be careful where you empty the ash. A few years back my missus managed to set a compost bin on fire, and the first we knew was when a fire truck rolled up (there was lots of smoke, not so much in the way of flames). Nowadays the ash gets thoroughly soaked with cold water before it is placed in the compost.
-
We had something similar occur when my son emptied the pot into the bin before things cooled down. We could smell it smoldering, but didn't know where until I opened the access door. That was a Channelock moment!! -
I used the Leatherman T4 Phillips screwdriver when repairing a door lock.
-
Time for a new rod for the heat iron

-
Removed staples with the pliers, scissors cut off a tag, and the large flat head held the spool of fishing line while I strung a new reel.

-
Rebar helped out in making another pocket/dangler clip.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login