ZapWizard's Leatherman Free P4 Mods
-

Pure genius. I had been idly wondering why you hadn't instantly come up with the appropriate holster Zap, but now I know why :D
When will it be available? -

Okay, now I have a holster design. Plus a bonus micro carrier. Each one can hold six bits, and the Ratchet. They should also work with the regular bit extender.
The will be available in BDU, Duty and Open Clip variants.@Dutch_Tooler said:
I had been idly wondering why you hadn't instantly come up with the appropriate holster Zap, but now I know why :D
When will it be available?What happened is I started to try do a design that would surround the whole ratchet, allowing to to sort of dock into the handle, but this turned out to be very bulky. Then I realized it would work better as a handle.
I have had lots of requests for adding this to the holster designs. I will take a look at that next. However, I already have a ton of holster combinations, so I may only do the popular ones at first, and on a request basis after that.As always I will be physically prototyping these. Shapeways shipping isn't fast, and neither is their service during Covid. I am not sure if I will order every variant, as that gets expensive quick, especially if I have to makes tweaks.
I don't expect to sell these for 4 to 6 weeks. In 4 to 6 weeks I also may be able to print these on a FormLabs Fuse 1.... that will change everything as I will have to setup my own store and ship from home. -
Holy Crap Zap!
Everything you do is awesome! I've been following your work with the P4 since I got mine a year ago and thanks to the convergence of my stimulus money coming and the Leatherman Ratchet being released, I took the plunge and ordered one of everything you make for the P4, should be getting the goodies from Shapeways in a week or so and I'm so excited.
It is funny that the ratchet was the tipping point but all of a sudden I saw how great the combination of your bit holder and the ratchet would make driving fasteners. Lets face it - a multitool has never been a very good way of dealing with alot of screws or bolts but we do it because we have the dang thing in our pocket and don't want to run to our toolbox to get a proper screwdriver when we just need to tighten a couple screws or get that little battery cover off of all those toys and gadgets. But now everything has changed - using a big square hunk of stainless steel to drive screws is fine if there is a nice ratchet attached and you don't have to re-grip that big square tool every half turn of the screw. I've been using the bit driver in my Skeletool with the ratchet for the last week as a proof of concept and it is great - so fast, so easy, so satisfying. And it will be even better with the P4 when I get your mods because it will be such a versatile and powerful tool.
Of course there are plenty of people dissing the Leatherman Ratchet - it's not made in America - its only guaranteed for 2 years - it blows up if you try to drive some 1/2 lag bolts into some hardwood... but come on people it's not made for that! Mine has worked great on all of the light and medium duty screw driving I've done, and more importantly it has made it fast and fun.
Anyway, I love the bit driver handle design that you couldn't resist making and am excited you may have access to a Fuse 1 so you can stop sharing the profits with Shapeways!
-

I need some opinions on this.
I am hesitant to add a ratchet grip to any of my existing tool holsters because of the larger diameter of the Ratchet Tool.
Here it is attached to a FREE P4 holster, and visually it doesn't look that bad, but physically I feel it would be quite awkward. -
If it were a bit more enclosed it might work (or not ??? ) but otherwise it might end up being to bulky and catching on things as you walk by

-
My 2 cts: I don't think it needs to be more enclosed... it might actually work pretty well. Wore the old holster again today and I don't think the additional girth of the ratchet would disturb me. I'd be tempted...
Or, for balance, the extension on one side and the ratchet on the other. One can't fully exclude the need for both. This is the way :D
-
@Dutch_Tooler said:
Or, for balance, the extension on one side and the ratchet on the other. One can't fully exclude the need for both.Can the ratchet do everything the extender can do? The extender might be redundant...
Ratchet on one side and flashlight on the other, for balance. ;)
-
Well, not quite everything
. The extender is monolithic, hence inherently more solid than the ratchet, whilst remaining thinner and thus potentially more usable in tight spots. Plus the extender and ratchet together provide more extension of reach if needed. Not quite redundant...
-
@Dutch_Tooler I am not sure there are enough customers who want to carry both for me to make that the default config.
@Syncop8r, I stay away from adding flashlight holsters as there are just way too many damn flashlights, no way to make a universal grip.
I do carry a seperate flashlight holster right next to my Free P4 holster, I just put them on together each time I head out to work. So this is why the separate holster is preferred myself.Before I go through the process of making it fit all the multitools, I may end up just prototyping the P4 version for myself to see if it replaces my holster as the daily carrier.
-
@ ZapWizard,
Understood. No real harm done as I usually carry the P4 holster together with a mini Skinth holding extra tools/bits which, lo and behold, has space for the ratchet (looks more in danger of falling out than it is, as the setting knob hooks behind the cover flap).
-
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
how are we not talking about this?
-
@Maxlvledc said:
how are we not talking about this?The first I have seen this. It's a bit funny that he made the video without watching the how-to videos I published. Fortunately he caught himself on that detail. (mostly)
His video does have some good points, I didn't realize how much folks would want the 4mm over the flat bits. -
I need some opinions on this.
I'd buy the ratchet holster variant. I'm even one of those horizontal carry weirdos.
-
@ZapWizard said:
The first I have seen this. It's a bit funny that he made the video without watching the how-to videos I published. Fortunately he caught himself on that detail. (mostly)
His video does have some good points, I didn't realize how much folks would want the 4mm over the flat bits.I'm with him, and I'm very thankful you were willing to make it. So thank you!
-

I finally got around to ordering the prototypes for the Ratchet Driver. Including a ratchet holder version of the P4 holster, not guarantees on that yet.
Also, for the past month I have been working on my own storefront, powered by Shopify.
Initially it will be stocked with just Shapeways sourced products, along with Amazon affiliate links for items which I can't stock.The main goal of the shop will be to reduce the confusion with all the variants and options available. The FREE P4 holster for example comes in more than 45 different configurations, and that doesn't even include the different color options.
Feel free to visit the site and sign up to be notified. (Link in the image)
-
That is great, Zap
I hope your new site does well as well as the sales

-
Have the ratchet driver holders came in yet? :ahhh
-
They were supposed to arrive today, but alas UPS Mail Innovations means UPS kicks your package around and then give it to the USPS to guarantee it suffers as much abuse and delay as possible.
-
:ahhh :ahhh :ahhhHoping it arrives in great condition at least by tomorrow

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
