What do we have on the way?
-
Also just ordered a Micra and a pouch for my Juice

-
@SurgeUk said:
Just ordered a LM Crunch (with leather pouch) from Hennie Haynes
Not a cheap thing, considering its limited tool choices but, in my defence, it was shiny
The limited tool choices don't bother me. I view the Crunch more as a backup to a folder or SAK that doesn't really have a serrated blade or file--and especially locking pliers.
I have the Kershaw A-100. It's a well-made tool, but you'd be nuts to try to carry it in a pocket. It's almost 6" long and considerably heavier than a Crunch. The only reason I can carry it is that I found a sheath to the Schrade locking pliers tool for peanuts locally. The Crunch is PST-sized and not a whole heck of a lot heavier. Heck, five-inch long dedicated locking pliers don't weigh much less. Having to assemble the pliers is becoming less and less of a big deal. Given I have as much in it as I would have a new Crunch, I may have made a mistake.
-
OMG a lot of stuff! One being the water bottle which will be in today, a few other things will also be in today but I don’t know what, a few things for the Mrs, a new tv stand, a lot of kitchen cabinets are getting delivered with a new stove today, a very busy yet downtime day.. cause we have to be here for them to drop everything off, yet can’t really do anything,, ahh..
JR -
@MadPlumbarian said:
OMG a lot of stuff! One being the water bottle which will be in today, a few other things will also be in today but I don’t know what, a few things for the Mrs, a new tv stand, a lot of kitchen cabinets are getting delivered with a new stove today, a very busy yet downtime day.. cause we have to be here for them to drop everything off, yet can’t really do anything,, ahh..
JR
That sounds like a busy day, or two :ahhh -
@cody6268 said:
The limited tool choices don't bother me. I view the Crunch more as a backup to a folder or SAK that doesn't really have a serrated blade or file--and especially locking pliers.I have the Kershaw A-100. It's a well-made tool, but you'd be nuts to try to carry it in a pocket. It's almost 6" long and considerably heavier than a Crunch. The only reason I can carry it is that I found a sheath to the Schrade locking pliers tool for peanuts locally. The Crunch is PST-sized and not a whole heck of a lot heavier. Heck, five-inch long dedicated locking pliers don't weigh much less. Having to assemble the pliers is becoming less and less of a big deal. Given I have as much in it as I would have a new Crunch, I may have made a mistake.
Sounds like I made the right choice then

-
Sounds like a nightmare day JR :ahhh
-
Yep, you did. The Kershaw is a little heavy, and the internal tools are somewhat short. And the whole thing isn't a proper tool steel. Mine was built from parts of three others it was sold with (all broken), and on most, the top or bottom jaw was snapped. Schrade and Irwin made the "Toolbox" series which used actual Vise Grips as the base, and (mostly) existing internals from various Schrade USA multitools. These are tool steel, but you've got things like Schrade's crappy flat Phillips to contend with. The Crunch is more compact, has proper tools, and is much stronger set up.
-
@cody6268 said:
Yep, you did. The Kershaw is a little heavy, and the internal tools are somewhat short. And the whole thing isn't a proper tool steel. Mine was built from parts of three others it was sold with (all broken), and on most, the top or bottom jaw was snapped. Schrade and Irwin made the "Toolbox" series which used actual Vise Grips as the base, and (mostly) existing internals from various Schrade USA multitools. These are tool steel, but you've got things like Schrade's crappy flat Phillips to contend with. The Crunch is more compact, has proper tools, and is much stronger set up.Thanks for the info' cody

-
Well, we’ve gotten five deliveries today, and idk if it’s done because our first one was TOTALLY screwed up! We were suppose to get 9 boxes of flooring and got only 8, we were to get 15 kitchen cabinets and we got 5! And yet one of them was wrong! On top of that other things didn’t get delivered, so as the Mrs sat on the phone talking to the delivery guy he said there was more stuff went out and he thinks they guys didn’t get everything off the truck? But the flooring, we special order so there better be 9 boxes!
So, even though we got some stuff, I can’t start anything because one thing goes over here another over there, and nothing together, so the guy said the some stuff won’t be in for another week so we’re just going to be waiting to start..
JR -
Oh but the one delivery dude was nice, the one box was heavy so I said to make it easy we could just put it in the garage like the rest of the stuff, so he backed up so close that my camera could just look right through his vehicle, and I marked the box that he slid off and into the garage..
JR
-
Got a set of carbon fiber scales, for a MiniChamp, on the way.
Now I wait. -
I might have overdone it last night but I didn't expect to get it all at once. A few things were on sale and sometimes when you see a good deal you just have to take the leap. The last of it was a best offer that to my surprise was accepted early this morning.
So, 10-51 to my 20 (en route to my location) is a Victorinox Spirit, an Enzo Necker 70, an Esse Izula II, two Paul Chen Professional tools which are an interesting oddity because they are based on the Gerber MP-600 but they have shears instead of pliers, and some pipe smoking accessories. That's two more contenders to try out for EDC fixed blade, and three multitools for the collection. My wallet is $200 lighter. It really is a sickness isn't it?

-
@Alan K. said:
I might have overdone it last night but I didn't expect to get it all at once. A few things were on sale and sometimes when you see a good deal you just have to take the leap. The last of it was a best offer that to my surprise was accepted early this morning.
So, 10-51 to my 20 (en route to my location) is a Victorinox Spirit, an Enzo Necker 70, an Esse Izula II, two Paul Chen Professional tools which are an interesting oddity because they are based on the Gerber MP-600 but they have shears instead of pliers, and some pipe smoking accessories. That's two more contenders to try out for EDC fixed blade, and three multitools for the collection. My wallet is $200 lighter. It really is a sickness isn't it?

It is a disease and were are all infected :ahhh :ahhh :ahhh -
I'm still waiting for my serrated Spartans and an extra Leatherman style ps.
Not only is it a long way from us to Sweden, I think we are only getting the mail every other day now
[It's not failure if you learn something from it]
-
Just bought a Havalon Evolve last night off of Amazon. That should scratch that several years itch in curiosity about Havalon.
-
Finally picked up some Marbles' knives I'd been looking at.
Marbles Dave Canterbury Scout King. 4 1/4" closed, 3" blade. I've been wanting to try a big traditional Scout, and aside from the $50-60 Remington R4243 reproduction Camillus made, this is the only other one. $15.

USGI Utility Knife. Been curious about it for years. At $7 for just the knife, I decided it was worth a try.
Gun Tool Screwdriver. A knockoff of an old USA-made item Colt sold in the 1970s. The difference with this one is that instead of four drivers like the Craftsman, it has just three; including one that should be good with glasses (made to adjust sights on pistols and rifles). At $3 a piece, I bought two. I have a use for the long neck chains they come with as well.

-
Oh, and a Leatherman Bond.
-
Finally found a Northwest Territory Navy coin knife. The NWT is no longer in business and I’ve been looking for a while.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login