What do we have on the way?
-
Sounds like a nightmare day JR :ahhh
-
Yep, you did. The Kershaw is a little heavy, and the internal tools are somewhat short. And the whole thing isn't a proper tool steel. Mine was built from parts of three others it was sold with (all broken), and on most, the top or bottom jaw was snapped. Schrade and Irwin made the "Toolbox" series which used actual Vise Grips as the base, and (mostly) existing internals from various Schrade USA multitools. These are tool steel, but you've got things like Schrade's crappy flat Phillips to contend with. The Crunch is more compact, has proper tools, and is much stronger set up.
-
@cody6268 said:
Yep, you did. The Kershaw is a little heavy, and the internal tools are somewhat short. And the whole thing isn't a proper tool steel. Mine was built from parts of three others it was sold with (all broken), and on most, the top or bottom jaw was snapped. Schrade and Irwin made the "Toolbox" series which used actual Vise Grips as the base, and (mostly) existing internals from various Schrade USA multitools. These are tool steel, but you've got things like Schrade's crappy flat Phillips to contend with. The Crunch is more compact, has proper tools, and is much stronger set up.Thanks for the info' cody

-
Well, we’ve gotten five deliveries today, and idk if it’s done because our first one was TOTALLY screwed up! We were suppose to get 9 boxes of flooring and got only 8, we were to get 15 kitchen cabinets and we got 5! And yet one of them was wrong! On top of that other things didn’t get delivered, so as the Mrs sat on the phone talking to the delivery guy he said there was more stuff went out and he thinks they guys didn’t get everything off the truck? But the flooring, we special order so there better be 9 boxes!
So, even though we got some stuff, I can’t start anything because one thing goes over here another over there, and nothing together, so the guy said the some stuff won’t be in for another week so we’re just going to be waiting to start..
JR -
Oh but the one delivery dude was nice, the one box was heavy so I said to make it easy we could just put it in the garage like the rest of the stuff, so he backed up so close that my camera could just look right through his vehicle, and I marked the box that he slid off and into the garage..
JR
-
Got a set of carbon fiber scales, for a MiniChamp, on the way.
Now I wait. -
I might have overdone it last night but I didn't expect to get it all at once. A few things were on sale and sometimes when you see a good deal you just have to take the leap. The last of it was a best offer that to my surprise was accepted early this morning.
So, 10-51 to my 20 (en route to my location) is a Victorinox Spirit, an Enzo Necker 70, an Esse Izula II, two Paul Chen Professional tools which are an interesting oddity because they are based on the Gerber MP-600 but they have shears instead of pliers, and some pipe smoking accessories. That's two more contenders to try out for EDC fixed blade, and three multitools for the collection. My wallet is $200 lighter. It really is a sickness isn't it?

-
@Alan K. said:
I might have overdone it last night but I didn't expect to get it all at once. A few things were on sale and sometimes when you see a good deal you just have to take the leap. The last of it was a best offer that to my surprise was accepted early this morning.
So, 10-51 to my 20 (en route to my location) is a Victorinox Spirit, an Enzo Necker 70, an Esse Izula II, two Paul Chen Professional tools which are an interesting oddity because they are based on the Gerber MP-600 but they have shears instead of pliers, and some pipe smoking accessories. That's two more contenders to try out for EDC fixed blade, and three multitools for the collection. My wallet is $200 lighter. It really is a sickness isn't it?

It is a disease and were are all infected :ahhh :ahhh :ahhh -
I'm still waiting for my serrated Spartans and an extra Leatherman style ps.
Not only is it a long way from us to Sweden, I think we are only getting the mail every other day now
[It's not failure if you learn something from it]
-
Just bought a Havalon Evolve last night off of Amazon. That should scratch that several years itch in curiosity about Havalon.
-
Finally picked up some Marbles' knives I'd been looking at.
Marbles Dave Canterbury Scout King. 4 1/4" closed, 3" blade. I've been wanting to try a big traditional Scout, and aside from the $50-60 Remington R4243 reproduction Camillus made, this is the only other one. $15.

USGI Utility Knife. Been curious about it for years. At $7 for just the knife, I decided it was worth a try.
Gun Tool Screwdriver. A knockoff of an old USA-made item Colt sold in the 1970s. The difference with this one is that instead of four drivers like the Craftsman, it has just three; including one that should be good with glasses (made to adjust sights on pistols and rifles). At $3 a piece, I bought two. I have a use for the long neck chains they come with as well.

-
Oh, and a Leatherman Bond.
-
Finally found a Northwest Territory Navy coin knife. The NWT is no longer in business and I’ve been looking for a while.
-
Two small Knipex pliers are on the way :ahhh
-
I bought a few items from KC Tool Co. For going on 3 years now, I've been kicking around various Knipex and Wera items. Ended up going with some completely different brands.
Felo 64539 Ergonic K Handle Ratcheting Screwdriver. Ratchets and flexes. Sometimes, I have to put screws in tight spaces, and this saves my rear there. I haven't bought any bits yet, meaning to buy a larger set when I have the money (or when they have advent calendars on sale again--but this year, they sold out before December!). Besides, I need to organize the various ones from cheaper brands I have first. I can see this becoming my go-to driver for lots of jobs. This is my first decent one.

Picard bottle opener. Really a small hammer with a bottle opener on the end. Sometimes, you need to tap something lightly to get it to comply with you. I rarely carry a hammer with me, unless I'm doing fence or carpentry work. You see lots of large lockbacks with horribly mangled handles due to people using them as hammers. Using the handle of a multitool can damage it badly (surprisingly, the only tools I've done it with, a cheap Workpro and an Ozark Trail showed no damage), or loosen the pommel of a fixed blade. It can ruin the pivot of a pair of pliers. I do not misuse my tools, so a small hammer is necessary. I figure this one, at roughly 7" OAL with a three-inch head is pocket size, but big enough for what I'm needing. It will also serve as a small pry tool, nail puller, and possibly marlinspike.

Felo 31078 60mm Round Awl on 4mm stock. One of my big "not using the right tool for the job" problems is using a multitool awl when starting a screw. They are usually too wide, and end up making a mess more often than not. I don't own a proper scratch awl. I figured at $3 each, buy two. I can also use them for leather work.

Felo 31068 Reversible Blade Screwdriver - 5.5mm Slotted and #2 Phillips. These are cheap and handy to just stash everywhere.

-
Oh yeah, our new toy came in yesterday, a 65in(165cm) tv! This will be replacing the living tv which is a 56in(142cm) which will then go in our bedroom to replace a 46in(116cm) which will then go downstairs into the workout room when that gets built for the Mrs so talk about a domino effect, so each room pretty much gets a 10in(25cm) upsize from one tv! lol..
JR
-
@cody6268 said:
I bought a few items from KC Tool Co. For going on 3 years now, I've been kicking around various Knipex and Wera items. Ended up going with some completely different brands.Felo 64539 Ergonic K Handle Ratcheting Screwdriver. Ratchets and flexes. Sometimes, I have to put screws in tight spaces, and this saves my rear there. I haven't bought any bits yet, meaning to buy a larger set when I have the money (or when they have advent calendars on sale again--but this year, they sold out before December!). Besides, I need to organize the various ones from cheaper brands I have first. I can see this becoming my go-to driver for lots of jobs. This is my first decent one.

Picard bottle opener. Really a small hammer with a bottle opener on the end. Sometimes, you need to tap something lightly to get it to comply with you. I rarely carry a hammer with me, unless I'm doing fence or carpentry work. You see lots of large lockbacks with horribly mangled handles due to people using them as hammers. Using the handle of a multitool can damage it badly (surprisingly, the only tools I've done it with, a cheap Workpro and an Ozark Trail showed no damage), or loosen the pommel of a fixed blade. It can ruin the pivot of a pair of pliers. I do not misuse my tools, so a small hammer is necessary. I figure this one, at roughly 7" OAL with a three-inch head is pocket size, but big enough for what I'm needing. It will also serve as a small pry tool, nail puller, and possibly marlinspike.

Felo 31078 60mm Round Awl on 4mm stock. One of my big "not using the right tool for the job" problems is using a multitool awl when starting a screw. They are usually too wide, and end up making a mess more often than not. I don't own a proper scratch awl. I figured at $3 each, buy two. I can also use them for leather work.

Felo 31068 Reversible Blade Screwdriver - 5.5mm Slotted and #2 Phillips. These are cheap and handy to just stash everywhere.

I’ve not heard of Felo before but that flex ratchet looks nice.
That little hammer looks interesting. The needing a small hammer is why I really like the Hammer Jammer heads for the Skeletool and one of the reasons I really like the Signal.
-
@Sos24 said:
I’ve not heard of Felo before but that flex ratchet looks nice.That little hammer looks interesting. The needing a small hammer is why I really like the Hammer Jammer heads for the Skeletool and one of the reasons I really like the Signal.
I wanted to try some Wera stuff, but it was a little out of my budget. And the Felo was both a flex and a ratcheting screwdriver. I've had some super-cheap ones before, and wanted to try something from a nicer brand. \I've been meaning to get the Hammer Jammer to put on my Skeletool for quite some time. Signal is a good tool for my use, but a smidge too heavy. MUT too tactical. I'm going to try the "Rescue" version, which has a place to allow fitting of the MUT's strap cutter blade. Besides, I have the bit selection of the Skeletool RX (window punch, Phillips/flat double end)in a plain Skeletool.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login