GOATGUNS
-
Likewise.
-
:D
-
Next model to grace my door is the venerable 1911.
Here is the front of the box.
20210429_142056A by Chako, on FlickrThe back of the box showing the parts included.
20210429_142143A by Chako, on FlickrOpening the package, you get the two stickers (This model is called Timeless), instruction sheet, customer care card, and the pieces to make the model.
20210429_142412A by Chako, on FlickrLooking at the model, I had to use my Utilikey 6 in 1 to remove the 4 staples holding the clear plastic top to the bottom parts tray.
20210429_143030A by Chako, on FlickrOnce again, much like the AK 47, the instructions could be a little better. This time around, very small images are the culprit. GOATGUNS know this and provide an online link to their build video which I had to watch twice in order to figure out where the spring and pin go. Once that was sorted, it took seconds to finish this one. Much like my Norinco 1911, this model came together much like the real thing. Now here is the 1911 completed.
20210429_145239A by Chako, on Flickr
20210429_145251A by Chako, on FlickrJust like the AK 47 posted above, this is one realistic 1911 model. I mean they got everything right, even the slide lock works.
20210429_145331A by Chako, on FlickrWorking safety lever...check.
20210429_145351A by Chako, on FlickrMagazine ejection button works as well.
20210429_145411A by Chako, on FlickrI mean, this really works like a real 1911 except it does not shoot anything. When you rack the slide, the hammer even cocks. Pressing the trigger releases the hammer. Impressive for such a small model. I guess every model also includes 3 dummy rounds that fit inside the magazine...these being to scale 45 APC rounds.
20210429_145523A by Chako, on FlickrI am very impressed with this one. Even the heavy metal base is nice. By now, I am not all that surprised.
-
Next up is an M16A1 model. This one is very nice, and even what I thought would be plastic parts are made out of metal.
The front of the box.
20210429_145737A by Chako, on FlickrThe back of the box.
20210429_145821A by Chako, on FlickrOpening the box you get another pair of stickers. This model is called Fugazi. The usual instruction sheet, customer care card and parts round out the packaging.
20210429_150357A by Chako, on FlickrThis model was a breeze to put together. The hardest part was positioning the foregrip together. You have to fit one end and press down on the spring loaded section to fit the other end inside the retaining section. The shoulder stock simply snapped in once slide into posit ion. Here is the completed rifle.
20210429_151808A by Chako, on FlickrAttention to details are evident here. Pulling the charging handle releases the magnetic dust cover.
20210429_151845A by Chako, on Flickr
20210429_151919A by Chako, on FlickrThe details even extend to the barrel and furniture.
20210429_151854A by Chako, on Flickr3 bullets are also included and they go into the working magazine.
20210429_152003A by Chako, on FlickrThe magazine's release mechanism even works.
20210429_152036A by Chako, on FlickrThe selector for safety, semi, and auto even moves.
20210429_152352A by Chako, on FlickrAnother well detailed miniature firearm. Can't wait to get the others in now.
-
Those are fantastic!

-
Barrett 82A1 1/3 scale model.
20210430_171442A by Chako, on Flickr
20210430_171523A by Chako, on FlickrThis model is called the Crusher.
20210430_171705A by Chako, on FlickrThis is a long firearm model.
20210430_172311A by Chako, on FlickrHere it is, almost 14 inches long. It commands my dinner table at my partner's house.
20210430_174532A by Chako, on FlickrThe details are good.
20210430_174540A by Chako, on Flickr50 caliber 1/3 scale rounds are surprisingly large.
20210430_174703A by Chako, on Flickr
20210430_174739A by Chako, on Flickr -
Wow, you're build yourself a **little **army, aren't you?...

-
You could say that. :D
-
AR-15 1/3 toy model.
Now this one is probably one of the nicest kits for those who like to fiddle with things.
20210430_174920A by Chako, on Flickr
20210430_174935AA by Chako, on FlickrThe tan version of the AR-15 is called Dustoff.
20210430_175111A by Chako, on FlickrIncluded in this kit is an extra silencer. This can replace the flash suppressor as both pieces unscrew from the barrel. I decided to keep the silencer on.
20210430_175502A by Chako, on FlickrHere is the completed model. Note that the stock is positional just like the real thing.
20210430_180917A by Chako, on Flickr
20210430_180933A by Chako, on FlickrDetails even go right down to the two positional disc sights which are windage operational.
20210430_180950A by Chako, on FlickrMuch like the M-16 model posted above, pulling the charging handle also releases the magnetic dust cover.
20210430_181019A by Chako, on FlickrThis is one of my favourite models thus far and ranks up there with the 1911 handgun.
-
Russian SVD 1/3 toy model.
I will say, the most difficult models to build so far have been the Russian guns. The AK 47 has some challenging parts, and this SVD does not disappoint. Both feature forestocks that are difficult to install.
20210430_184844A by Chako, on FlickrThis model is called Affirmative. Sorry, I forgot to take a photo of the back of the box.
20210430_185041A by Chako, on FlickrThe parts.
20210430_185348A by Chako, on FlickrHere is the finished model. Only a few of the seedier words of the english language were harmed during this build.

20210430_193801A by Chako, on FlickrLike all of these models, you get 3 rounds that fit inside the magazine.
20210430_193842A by Chako, on FlickrA lot of things that should work do on these models. The only thing that doesn't is cartridge ejection.
20210430_194322A by Chako, on Flickr
20210430_194357A by Chako, on Flickr -
Accuracy International Arctic Warfare L96A1 1/3 model...GOATGUNS just calls this the Sniper.
20210430_194426A by Chako, on FlickrBack of the box.
20210430_194445A by Chako, on FlickrI guess to be more accurately, they call this one the American Sniper.
20210430_194559A by Chako, on FlickrThe parts.
20210430_195623A by Chako, on FlickrOnce again, 3 dummy rounds that fit inside the magazine.
20210430_202449A by Chako, on Flickrthe bolt is functional. It just doesn't pick up any of the dummy rounds and eject them. It would have been really cool if it did this.
20210430_202557A by Chako, on Flickr
20210430_202640A by Chako, on FlickrThis one is a bit challenging in regards to the instructions. They give you different sized screws and leave it up to you to figure out which goes where. I figured out on my own as there was no mention, that one screw goes under the bolt carriage and prevents the bolt from going back too far. There was also a little metal clip with no explanation of where it should go. I figured out that it goes between the magazine and the stock body. This would prevent the bolt carrier getting hung up on the top of the magazine. I haven't installed it as yet, but I am certain this is where that unlabeled piece goes. The instructions could have been better for this one.
-
Got two more models to come in...the AUG and a WW2 Tommy Gun.
I almost forgot. My partner's cat Tigger was supervising me on these builds. Without her timely input, I would have probably used a few more naughty words during the SVD build.
20210503_165338A by Chako, on Flickr -
If only they ejected the cases.
And fired the bullets! :ahhh -
@ReamerPunch said:
If only they ejected the cases.
And fired the bullets! :ahhhAnd we were 3 ft. tall!

-
The last 2 models came in yesterday.
The Steyr AUG which is called a BullPup.
20210510_162139A by Chako, on FlickrBack of the box.
20210510_162156A by Chako, on FlickrThe sticker names this one a s Pumped. Not sure why. The instructions need to be improved. This was one tough model to assemble. The images are small, and not very well photographed. This leave you a lot of wiggle room to guess at what is going on.
20210510_162258A by Chako, on FlickrLooks simple enough...but it isn't.
20210510_162703A by Chako, on FlickrI had to figure where the charging lever had to go, and a few other details. I eventually did figure them out, but it added an extra 15 minutes of dry fitting parts together and trying to decipher the instructions. I guess that is part of the fun of building these 1/3 models.
20210510_165351A by Chako, on FlickrAt the time I bought this, I figured this was screaming for an accessory. I bought this 4X scope and it does go well with the AUG.
20210510_165623A by Chako, on Flickr -
The last model is the WW2 Thompson (TMS).
20210510_170009A by Chako, on FlickrBack of the box.
20210510_170029A by Chako, on FlickrThe instructions for this one are better. However, building it did prove tricky.
20210510_170143A by Chako, on FlickrThe parts.
20210510_170407A by Chako, on FlickrThe most frustrating 34 minutes of my life began after taking this photo. It was time to put those little bullets into the magazine. However, the magazine was constructed in such a way that was nigh impossible to put all 3 tiny bullets in there. I did manage with the aid of my Swiss+Tech Utilikey 6 in 1, and a lot of cursing.
20210510_173111A by Chako, on FlickrHere is the finished model. Those little rounds are never getting out of that magazine!
20210510_181612A by Chako, on Flickr -
Well that is it. I think I have built one of every model they make currently. For the most part, these are detailed little fidget toys that look good on a desk. If you do not mind a slight challenge in building them, and don't mind little nondescript photos and sometimes cryptic instructions...these are fun to build .
-
@Chako said:
The last 2 models came in yesterday.(...)
At the time I bought this, I figured this was screaming for an accessory. I bought this 4X scope and it does go well with the AUG.
20210510_165623A by Chako, on FlickrThey sell acessories? Just the sight, or a silencer or bipod/tripod?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login