Very stiff blades on old Explorer - looking for suggestions
-
Great advice from all and great save. Explorer is my favorite SAK by far.
I don't think theres much else to do other than enjoy.
-
Great news

-
Sounds like you’ve got it loosened enough, but in case anyone wants to ‘fix’ one like this ‘quickly’...you can use an old blade like a wedge/chisel between the tool and liner and spread it in various places until it’s sufficiently loosened. Follow up with lots of oil and opening/closing cycles to the eventually get enough of the aluminum oxide out. I was a bit surprised at how hard the blade could be hit without doing any apparent damage to the knife being fixed.
-
@kamakiri said:
Sounds like you’ve got it loosened enough, but in case anyone wants to ‘fix’ one like this ‘quickly’...you can use an old blade like a wedge/chisel between the tool and liner and spread it in various places until it’s sufficiently loosened. Follow up with lots of oil and opening/closing cycles to the eventually get enough of the aluminum oxide out. I was a bit surprised at how hard the blade could be hit without doing any apparent damage to the knife being fixed.Good tip, kamakiri. Thank you for sharing it.
At this point, I'm satisfied with the progress I've made. The blades don't have the "snap" of a new SAK, but more importantly I can open them without a crowbar and actually use them. So I consider it a win and am happy that this poor neglected SAK can have a useful second life.
-
@SteveP said:
Good tip, kamakiri. Thank you for sharing it.At this point, I'm satisfied with the progress I've made. The blades don't have the "snap" of a new SAK, but more importantly I can open them without a crowbar and actually use them. So I consider it a win and am happy that this poor neglected SAK can have a useful second life.
No problem...might help somebody with a similar issue with their knife. It’s always rewarding to save a knife that would otherwise be useless aside from part-out or rebuilding.
The good news is that it should get better over time if oiled and maintained with use. If you want to restore the snap faster, you could get a tiny bit of clay in the stiff joints and do a few opening/closing cycles then wash, clean and re-oil. The clay helps break down and push out the aluminum oxides. And washes out easily with water.
-
Great advice kamakiri -
@Max Stone said:
Great to hear it's well again
The Explorer has a great tool load and is very popular - I'm sure it will be a special SAK for you!I definitely like the tool selection. A lot of the main used ones from my SwissChamp without the bulk of the SwissChamp.
But I'd be happier with just one more layer - pliers. I haven't found a SAK yet with that combination though.
The Swiss Bianco Yeoman Mechanic comes so close, but I shudder to think what a discontinued collectible like that sells for.
-
That would be a good build Steve. Basically the first 4 layers of a SC (openers, Phillips/msg, pliers, scissors), and finishing with the blade layer.
I think the one decision is whether or not to swap around the pliers and Phillips layer, to have the Phillips central in the 5 layers. I think it should work, but will need to try with a test build.

-
@Max Stone said:
That would be a good build Steve. Basically the first 4 layers of a SC (openers, Phillips/msg, pliers, scissors), and finishing with the blade layer.I think the one decision is whether or not to swap around the pliers and Phillips layer, to have the Phillips central in the 5 layers. I think it should work, but will need to try with a test build.
I'm glad you like it, too. Maybe if enough of us like it, Victorinox will build it. :)
I hadn't thought of the order of the layers.
On the back layer, I'd want to keep some of the SC tools - reamer, hook, corkscrew, maybe the 2.5mm screwdriver. I don't know anything about custom building SAKs so this is where I can dream, but don't know what's possible.
As I'm dreaming though, I'd have the old-style gray-rimmed magnifier and longer Phillips, and I'd also replace the hook with the hook+nail file from the Compact.
With some slightly-modified Plus scales, I'd have my ideal EDC SAK!
Now for a name...SwissExplorer? ExplorerChamp?
-
The...Detective.
The hook is OK as this pairs with the scissors. But the pliers and Phillips backsprings can't have tools, so no fine screwdriver or chisel (these normally pair with the file and saw. I've got all the parts so I'l have a go at this build.

-
Looks like it will work...
.jpeg)

-
Thank you Steve - final result is here /topic/87445
It's a build from spares I had lying around, but it would be possible to build from a SwissChamp donor and reuse the brass pins, so nothing extra needed. I could build another but the older SCs with grey mag are getting difficult to find in my country, and shipping to the US can be expensive as only courier is reliable. Maybe a US-based modder could build you one?
-
@Max Stone said:
Thank you Steve - final result is here /topic/87445I took a look at the pictures - it's a thing of beauty.
I would make only two changes - I just prefer black scales (though yours is striking) and I'd add a second pin groove. You do great work. Too bad you're so far away. At least I have the pictures.
-
Thanks Steve

-
@Max Stone said:
Thank you Steve - final result is here /topic/87445It's a build from spares I had lying around, but it would be possible to build from a SwissChamp donor and reuse the brass pins, so nothing extra needed. I could build another but the older SCs with grey mag are getting difficult to find in my country, and shipping to the US can be expensive as only courier is reliable. Maybe a US-based modder could build you one?
I like the idea of starting with a SwissChamp donor, but I'd still need to acquire the hook+file as that's not on the SwissChamp. Do you know where I can get one of those?
-
Difficult to find individual parts - my came from a Compact that I had stripped for the combo tool.
-
Well done on getting it working.
I'd give it a light lube just to finish, the WD40 will have flushed out the last of the good lubricants and when the WD dries out it might feel a bit stiff again.
Sent from my SM-G960F using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
