Very stiff blades on old Explorer - looking for suggestions
-
@SteveP said:
Good tip, kamakiri. Thank you for sharing it.At this point, I'm satisfied with the progress I've made. The blades don't have the "snap" of a new SAK, but more importantly I can open them without a crowbar and actually use them. So I consider it a win and am happy that this poor neglected SAK can have a useful second life.
No problem...might help somebody with a similar issue with their knife. It’s always rewarding to save a knife that would otherwise be useless aside from part-out or rebuilding.
The good news is that it should get better over time if oiled and maintained with use. If you want to restore the snap faster, you could get a tiny bit of clay in the stiff joints and do a few opening/closing cycles then wash, clean and re-oil. The clay helps break down and push out the aluminum oxides. And washes out easily with water.
-
Great advice kamakiri -
@Max Stone said:
Great to hear it's well again
The Explorer has a great tool load and is very popular - I'm sure it will be a special SAK for you!I definitely like the tool selection. A lot of the main used ones from my SwissChamp without the bulk of the SwissChamp.
But I'd be happier with just one more layer - pliers. I haven't found a SAK yet with that combination though.
The Swiss Bianco Yeoman Mechanic comes so close, but I shudder to think what a discontinued collectible like that sells for.
-
That would be a good build Steve. Basically the first 4 layers of a SC (openers, Phillips/msg, pliers, scissors), and finishing with the blade layer.
I think the one decision is whether or not to swap around the pliers and Phillips layer, to have the Phillips central in the 5 layers. I think it should work, but will need to try with a test build.

-
@Max Stone said:
That would be a good build Steve. Basically the first 4 layers of a SC (openers, Phillips/msg, pliers, scissors), and finishing with the blade layer.I think the one decision is whether or not to swap around the pliers and Phillips layer, to have the Phillips central in the 5 layers. I think it should work, but will need to try with a test build.
I'm glad you like it, too. Maybe if enough of us like it, Victorinox will build it. :)
I hadn't thought of the order of the layers.
On the back layer, I'd want to keep some of the SC tools - reamer, hook, corkscrew, maybe the 2.5mm screwdriver. I don't know anything about custom building SAKs so this is where I can dream, but don't know what's possible.
As I'm dreaming though, I'd have the old-style gray-rimmed magnifier and longer Phillips, and I'd also replace the hook with the hook+nail file from the Compact.
With some slightly-modified Plus scales, I'd have my ideal EDC SAK!
Now for a name...SwissExplorer? ExplorerChamp?
-
The...Detective.
The hook is OK as this pairs with the scissors. But the pliers and Phillips backsprings can't have tools, so no fine screwdriver or chisel (these normally pair with the file and saw. I've got all the parts so I'l have a go at this build.

-
Looks like it will work...
.jpeg)

-
Thank you Steve - final result is here /topic/87445
It's a build from spares I had lying around, but it would be possible to build from a SwissChamp donor and reuse the brass pins, so nothing extra needed. I could build another but the older SCs with grey mag are getting difficult to find in my country, and shipping to the US can be expensive as only courier is reliable. Maybe a US-based modder could build you one?
-
@Max Stone said:
Thank you Steve - final result is here /topic/87445I took a look at the pictures - it's a thing of beauty.
I would make only two changes - I just prefer black scales (though yours is striking) and I'd add a second pin groove. You do great work. Too bad you're so far away. At least I have the pictures.
-
Thanks Steve

-
@Max Stone said:
Thank you Steve - final result is here /topic/87445It's a build from spares I had lying around, but it would be possible to build from a SwissChamp donor and reuse the brass pins, so nothing extra needed. I could build another but the older SCs with grey mag are getting difficult to find in my country, and shipping to the US can be expensive as only courier is reliable. Maybe a US-based modder could build you one?
I like the idea of starting with a SwissChamp donor, but I'd still need to acquire the hook+file as that's not on the SwissChamp. Do you know where I can get one of those?
-
Difficult to find individual parts - my came from a Compact that I had stripped for the combo tool.
-
Well done on getting it working.
I'd give it a light lube just to finish, the WD40 will have flushed out the last of the good lubricants and when the WD dries out it might feel a bit stiff again.
Sent from my SM-G960F using Tapatalk
-
@Rab21 said:
Well done on getting it working.I'd give it a light lube just to finish, the WD40 will have flushed out the last of the good lubricants and when the WD dries out it might feel a bit stiff again.
Sent from my SM-G960F using Tapatalk
Thank you. What do you recommend for a lube? And do you mean soaking it, wiping it down, something else? Sorry, I'm a newb at restoring old SAKs.
I did put some of the official Victorinox oil in each of the openings after I put everything back together. Should I still lube it?
-
@Max Stone said:
Difficult to find individual parts - my came from a Compact that I had stripped for the combo tool.Thanks, that's what I was guessing. So if I did want to try this myself, I'd need a donor SwissChamp and a donor Compact.
Is it realistic to drill out the rivets with a hand drill? I watched some custom build videos on YouTube and it looked like the guys who knew what they were doing were using drill presses. The one guy with a power hand drill, it was wobbling around and the drill bit was bending in a scary way.
I've got plenty of tools, but those are for DIY home repair and improvement, not metal working. But the process looks pretty simple once you get the rivets drilled out. Or am I missing something?
-
I use a Dremel with a 2.5mm and 2.2mm drill bit to release the collars, but it takes a steady hand to save the collars as you need to drill enough of the pin away so that you can tap the pin down (with a fine punch) without drilling the collar. A gentle tap with a sharp punch helps to center the drill bit on the top of the rivet. I have a drill press, but I just find I have more fine control with a hand-held Dremel. The blind pin (without collar) I carefully grind off with a Dremel stone, and then tap gently through.
I'd suggest getting a couple of beat-up Spartans to find what works best for you, before jumping in on dismantling the SwissChamp/Compact. This will also give you a few spare collars, as these are sometimes difficult to save.
I guess you've found the Mod Squad thread, as this has some of the best resources for SAK modding https://forum.multitool.org/index.php/board,16.0.html
-
@Max Stone said:
I use a Dremel with a 2.5mm and 2.2mm drill bit to release the collars, but it takes a steady hand to save the collars as you need to drill enough of the pin away so that you can tap the pin down (with a fine punch) without drilling the collar. A gentle tap with a sharp punch helps to center the drill bit on the top of the rivet. I have a drill press, but I just find I have more fine control with a hand-held Dremel. The blind pin (without collar) I carefully grind off with a Dremel stone, and then tap gently through.I'd suggest getting a couple of beat-up Spartans to find what works best for you, before jumping in on dismantling the SwissChamp/Compact. This will also give you a few spare collars, as these are sometimes difficult to save.
I guess you've found the Mod Squad thread, as this has some of the best resources for SAK modding https://forum.multitool.org/index.php/board,16.0.html
Thank you for the tips, Max. I hadn't found the Mod Squad forum yet, but followed your link. Gareth's how-to guide was very helpful.
Now I just need to find suitable donor SAKs. SwissChamps and Compacts are popular models. Very little on eBay right now. Time to start scouring garage sales and antique stores. (Though part of me really doesn't like the idea of breaking apart a working SAK. Probably why I put the effort into saving the old Explorer.)
-
Great thread everybody

This is what this forum is all about - Helping each other out and sharing the love and knowedge

Great to see you getting so involved in the forum Sir SteveP

-
@SteveP said:
Thank you. What do you recommend for a lube? And do you mean soaking it, wiping it down, something else? Sorry, I'm a newb at restoring old SAKs.I did put some of the official Victorinox oil in each of the openings after I put everything back together. Should I still lube it?
Oops, missed that bit. No that will be fine.
Yeah just put a few drops of the vic oil in and open and close a few times to work in.
I've seen WD40 used to free stuff off before in my work and then what ever it was seize worse than before because the WD has flushed any lubricant away.
But sounds like you've got it .
Sent from my SM-G960F using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
