What do we have on the way?
-
Two small Knipex pliers are on the way :ahhh
-
I bought a few items from KC Tool Co. For going on 3 years now, I've been kicking around various Knipex and Wera items. Ended up going with some completely different brands.
Felo 64539 Ergonic K Handle Ratcheting Screwdriver. Ratchets and flexes. Sometimes, I have to put screws in tight spaces, and this saves my rear there. I haven't bought any bits yet, meaning to buy a larger set when I have the money (or when they have advent calendars on sale again--but this year, they sold out before December!). Besides, I need to organize the various ones from cheaper brands I have first. I can see this becoming my go-to driver for lots of jobs. This is my first decent one.

Picard bottle opener. Really a small hammer with a bottle opener on the end. Sometimes, you need to tap something lightly to get it to comply with you. I rarely carry a hammer with me, unless I'm doing fence or carpentry work. You see lots of large lockbacks with horribly mangled handles due to people using them as hammers. Using the handle of a multitool can damage it badly (surprisingly, the only tools I've done it with, a cheap Workpro and an Ozark Trail showed no damage), or loosen the pommel of a fixed blade. It can ruin the pivot of a pair of pliers. I do not misuse my tools, so a small hammer is necessary. I figure this one, at roughly 7" OAL with a three-inch head is pocket size, but big enough for what I'm needing. It will also serve as a small pry tool, nail puller, and possibly marlinspike.

Felo 31078 60mm Round Awl on 4mm stock. One of my big "not using the right tool for the job" problems is using a multitool awl when starting a screw. They are usually too wide, and end up making a mess more often than not. I don't own a proper scratch awl. I figured at $3 each, buy two. I can also use them for leather work.

Felo 31068 Reversible Blade Screwdriver - 5.5mm Slotted and #2 Phillips. These are cheap and handy to just stash everywhere.

-
Oh yeah, our new toy came in yesterday, a 65in(165cm) tv! This will be replacing the living tv which is a 56in(142cm) which will then go in our bedroom to replace a 46in(116cm) which will then go downstairs into the workout room when that gets built for the Mrs so talk about a domino effect, so each room pretty much gets a 10in(25cm) upsize from one tv! lol..
JR
-
@cody6268 said:
I bought a few items from KC Tool Co. For going on 3 years now, I've been kicking around various Knipex and Wera items. Ended up going with some completely different brands.Felo 64539 Ergonic K Handle Ratcheting Screwdriver. Ratchets and flexes. Sometimes, I have to put screws in tight spaces, and this saves my rear there. I haven't bought any bits yet, meaning to buy a larger set when I have the money (or when they have advent calendars on sale again--but this year, they sold out before December!). Besides, I need to organize the various ones from cheaper brands I have first. I can see this becoming my go-to driver for lots of jobs. This is my first decent one.

Picard bottle opener. Really a small hammer with a bottle opener on the end. Sometimes, you need to tap something lightly to get it to comply with you. I rarely carry a hammer with me, unless I'm doing fence or carpentry work. You see lots of large lockbacks with horribly mangled handles due to people using them as hammers. Using the handle of a multitool can damage it badly (surprisingly, the only tools I've done it with, a cheap Workpro and an Ozark Trail showed no damage), or loosen the pommel of a fixed blade. It can ruin the pivot of a pair of pliers. I do not misuse my tools, so a small hammer is necessary. I figure this one, at roughly 7" OAL with a three-inch head is pocket size, but big enough for what I'm needing. It will also serve as a small pry tool, nail puller, and possibly marlinspike.

Felo 31078 60mm Round Awl on 4mm stock. One of my big "not using the right tool for the job" problems is using a multitool awl when starting a screw. They are usually too wide, and end up making a mess more often than not. I don't own a proper scratch awl. I figured at $3 each, buy two. I can also use them for leather work.

Felo 31068 Reversible Blade Screwdriver - 5.5mm Slotted and #2 Phillips. These are cheap and handy to just stash everywhere.

I’ve not heard of Felo before but that flex ratchet looks nice.
That little hammer looks interesting. The needing a small hammer is why I really like the Hammer Jammer heads for the Skeletool and one of the reasons I really like the Signal.
-
@Sos24 said:
I’ve not heard of Felo before but that flex ratchet looks nice.That little hammer looks interesting. The needing a small hammer is why I really like the Hammer Jammer heads for the Skeletool and one of the reasons I really like the Signal.
I wanted to try some Wera stuff, but it was a little out of my budget. And the Felo was both a flex and a ratcheting screwdriver. I've had some super-cheap ones before, and wanted to try something from a nicer brand. \I've been meaning to get the Hammer Jammer to put on my Skeletool for quite some time. Signal is a good tool for my use, but a smidge too heavy. MUT too tactical. I'm going to try the "Rescue" version, which has a place to allow fitting of the MUT's strap cutter blade. Besides, I have the bit selection of the Skeletool RX (window punch, Phillips/flat double end)in a plain Skeletool.
-
@cody6268 said:
I wanted to try some Wera stuff, but it was a little out of my budget. And the Felo was both a flex and a ratcheting screwdriver. I've had some super-cheap ones before, and wanted to try something from a nicer brand. \I've been meaning to get the Hammer Jammer to put on my Skeletool for quite some time. Signal is a good tool for my use, but a smidge too heavy. MUT too tactical. I'm going to try the "Rescue" version, which has a place to allow fitting of the MUT's strap cutter blade. Besides, I have the bit selection of the Skeletool RX (window punch, Phillips/flat double end)in a plain Skeletool.
The same maker of the Hammer Jammer made two hammer versions that use the rescue blade from the MUT


-
Benchmade Mini Griptillian 555

Benchmade Mini Bugout YellowJacket

Benchmade Mini Bugout Neon Green

-
Nice trio.

-
An Ambassador

-
NICE Benchmade haul. The 555 is wonderful.

-
I broke down and ordered some Surge goodies to dress mine up. Also waiting on my 300m which should be here this weekend.
Oh, and I found a part to fix an old Gerber that had a broken cap lifter
Pics to come when all arrives.
-
Boker Tech Tool 1 in copper, it just looked too good, sorry Bond you'll have to wait

-
@GearedForwards said:
Boker Tech Tool 1 in copper, it just looked too good, sorry Bond you'll have to wait
It is a lovely looking thing, isn't it

I didn't bite the bullet/knife as I don't very often use the other one I have, whatever it's called
(it's red
) -
@SurgeUk said:
It is a lovely looking thing, isn't it
I didn't bite the bullet/knife as I don't very often use the other one I have, whatever it's called
(it's red
)It is, Heinnie got to me through my own inboxx, stupid newsletter

Ahh you have the Heinnie edition of it, I'm planning on moving the scales back and forth from that one to my Tech Tool 4 Urban (basically a four layer SAK)

-
@GearedForwards said:
It is, Heinnie got to me through my own inboxx, stupid newsletter :facepalm:Ahh you have the Heinnie edition of it, I'm planning on moving the scales back and forth from that one to my Tech Tool 4 Urban (basically a four layer SAK) :tu:
I do indeed have HH version (why couldn't it be OHO :dunno: ) The Tech Tool 4 Urban you're waiting for is it;
Boker Plus | Suited For Every Budget, Find The One for You
Here at Heinnie Haynes, we do like a good Boker Plus knife. They are quality produced by Boker Knives, and are also priced perfectly for almost every budget. Whether you are after a UK Friendly Carry knife, a locking knife, a tactical pen or a fixed blade knife, then our range of Boker Plus Knives and tools is perfectly suited to you. Many of the Boker Plus knives and tools often find themselves in our bestsellers list, and quite rightly so. Knives like the Boker Plus XS and Tech-Tools, also the Exskelibur folding knives and the tactical pen series. Whether your budget is big or small, Boker Plus will have a knife that'll suit your needs!
(heinnie.com)
or
-
@SurgeUk said:
I do indeed have HH version (why couldn't it be OHO :dunno: ) The Tech Tool 4 Urban you're waiting for is it;Boker Plus | Suited For Every Budget, Find The One for You
Here at Heinnie Haynes, we do like a good Boker Plus knife. They are quality produced by Boker Knives, and are also priced perfectly for almost every budget. Whether you are after a UK Friendly Carry knife, a locking knife, a tactical pen or a fixed blade knife, then our range of Boker Plus Knives and tools is perfectly suited to you. Many of the Boker Plus knives and tools often find themselves in our bestsellers list, and quite rightly so. Knives like the Boker Plus XS and Tech-Tools, also the Exskelibur folding knives and the tactical pen series. Whether your budget is big or small, Boker Plus will have a knife that'll suit your needs!
(heinnie.com)
or
Neither, why on earth is a saw urban? :think:
It's basically the first one but no saw and a phillips instead of a corkscrew (though mine is the CF version). I picked it up ffrom Heinnie back in 2018 I think.
Though you have reminded me that I want to pick up a mini tech tool with the driver/opener, I love the zebrawood one on my keys atm but would like that tool instead of the scissors.
They're not OHO for legal reasons in Germany I think? But on the one layer knives I think you could probably fit one of those screw on thumbstuds that people tend to put on the Buck 110 :tu:
-
A Victorinox folding steak knife in orange.

Might get a yellow one too.
-
3 Roxon multi-tools hopefully. A Phantom, a BBQ Tool, and the Spark.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login