What do we have on the way?
-
I'm still waiting for my serrated Spartans and an extra Leatherman style ps.
Not only is it a long way from us to Sweden, I think we are only getting the mail every other day now
[It's not failure if you learn something from it]
-
Just bought a Havalon Evolve last night off of Amazon. That should scratch that several years itch in curiosity about Havalon.
-
Finally picked up some Marbles' knives I'd been looking at.
Marbles Dave Canterbury Scout King. 4 1/4" closed, 3" blade. I've been wanting to try a big traditional Scout, and aside from the $50-60 Remington R4243 reproduction Camillus made, this is the only other one. $15.

USGI Utility Knife. Been curious about it for years. At $7 for just the knife, I decided it was worth a try.
Gun Tool Screwdriver. A knockoff of an old USA-made item Colt sold in the 1970s. The difference with this one is that instead of four drivers like the Craftsman, it has just three; including one that should be good with glasses (made to adjust sights on pistols and rifles). At $3 a piece, I bought two. I have a use for the long neck chains they come with as well.

-
Oh, and a Leatherman Bond.
-
Finally found a Northwest Territory Navy coin knife. The NWT is no longer in business and I’ve been looking for a while.
-
Two small Knipex pliers are on the way :ahhh
-
I bought a few items from KC Tool Co. For going on 3 years now, I've been kicking around various Knipex and Wera items. Ended up going with some completely different brands.
Felo 64539 Ergonic K Handle Ratcheting Screwdriver. Ratchets and flexes. Sometimes, I have to put screws in tight spaces, and this saves my rear there. I haven't bought any bits yet, meaning to buy a larger set when I have the money (or when they have advent calendars on sale again--but this year, they sold out before December!). Besides, I need to organize the various ones from cheaper brands I have first. I can see this becoming my go-to driver for lots of jobs. This is my first decent one.

Picard bottle opener. Really a small hammer with a bottle opener on the end. Sometimes, you need to tap something lightly to get it to comply with you. I rarely carry a hammer with me, unless I'm doing fence or carpentry work. You see lots of large lockbacks with horribly mangled handles due to people using them as hammers. Using the handle of a multitool can damage it badly (surprisingly, the only tools I've done it with, a cheap Workpro and an Ozark Trail showed no damage), or loosen the pommel of a fixed blade. It can ruin the pivot of a pair of pliers. I do not misuse my tools, so a small hammer is necessary. I figure this one, at roughly 7" OAL with a three-inch head is pocket size, but big enough for what I'm needing. It will also serve as a small pry tool, nail puller, and possibly marlinspike.

Felo 31078 60mm Round Awl on 4mm stock. One of my big "not using the right tool for the job" problems is using a multitool awl when starting a screw. They are usually too wide, and end up making a mess more often than not. I don't own a proper scratch awl. I figured at $3 each, buy two. I can also use them for leather work.

Felo 31068 Reversible Blade Screwdriver - 5.5mm Slotted and #2 Phillips. These are cheap and handy to just stash everywhere.

-
Oh yeah, our new toy came in yesterday, a 65in(165cm) tv! This will be replacing the living tv which is a 56in(142cm) which will then go in our bedroom to replace a 46in(116cm) which will then go downstairs into the workout room when that gets built for the Mrs so talk about a domino effect, so each room pretty much gets a 10in(25cm) upsize from one tv! lol..
JR
-
@cody6268 said:
I bought a few items from KC Tool Co. For going on 3 years now, I've been kicking around various Knipex and Wera items. Ended up going with some completely different brands.Felo 64539 Ergonic K Handle Ratcheting Screwdriver. Ratchets and flexes. Sometimes, I have to put screws in tight spaces, and this saves my rear there. I haven't bought any bits yet, meaning to buy a larger set when I have the money (or when they have advent calendars on sale again--but this year, they sold out before December!). Besides, I need to organize the various ones from cheaper brands I have first. I can see this becoming my go-to driver for lots of jobs. This is my first decent one.

Picard bottle opener. Really a small hammer with a bottle opener on the end. Sometimes, you need to tap something lightly to get it to comply with you. I rarely carry a hammer with me, unless I'm doing fence or carpentry work. You see lots of large lockbacks with horribly mangled handles due to people using them as hammers. Using the handle of a multitool can damage it badly (surprisingly, the only tools I've done it with, a cheap Workpro and an Ozark Trail showed no damage), or loosen the pommel of a fixed blade. It can ruin the pivot of a pair of pliers. I do not misuse my tools, so a small hammer is necessary. I figure this one, at roughly 7" OAL with a three-inch head is pocket size, but big enough for what I'm needing. It will also serve as a small pry tool, nail puller, and possibly marlinspike.

Felo 31078 60mm Round Awl on 4mm stock. One of my big "not using the right tool for the job" problems is using a multitool awl when starting a screw. They are usually too wide, and end up making a mess more often than not. I don't own a proper scratch awl. I figured at $3 each, buy two. I can also use them for leather work.

Felo 31068 Reversible Blade Screwdriver - 5.5mm Slotted and #2 Phillips. These are cheap and handy to just stash everywhere.

I’ve not heard of Felo before but that flex ratchet looks nice.
That little hammer looks interesting. The needing a small hammer is why I really like the Hammer Jammer heads for the Skeletool and one of the reasons I really like the Signal.
-
@Sos24 said:
I’ve not heard of Felo before but that flex ratchet looks nice.That little hammer looks interesting. The needing a small hammer is why I really like the Hammer Jammer heads for the Skeletool and one of the reasons I really like the Signal.
I wanted to try some Wera stuff, but it was a little out of my budget. And the Felo was both a flex and a ratcheting screwdriver. I've had some super-cheap ones before, and wanted to try something from a nicer brand. \I've been meaning to get the Hammer Jammer to put on my Skeletool for quite some time. Signal is a good tool for my use, but a smidge too heavy. MUT too tactical. I'm going to try the "Rescue" version, which has a place to allow fitting of the MUT's strap cutter blade. Besides, I have the bit selection of the Skeletool RX (window punch, Phillips/flat double end)in a plain Skeletool.
-
@cody6268 said:
I wanted to try some Wera stuff, but it was a little out of my budget. And the Felo was both a flex and a ratcheting screwdriver. I've had some super-cheap ones before, and wanted to try something from a nicer brand. \I've been meaning to get the Hammer Jammer to put on my Skeletool for quite some time. Signal is a good tool for my use, but a smidge too heavy. MUT too tactical. I'm going to try the "Rescue" version, which has a place to allow fitting of the MUT's strap cutter blade. Besides, I have the bit selection of the Skeletool RX (window punch, Phillips/flat double end)in a plain Skeletool.
The same maker of the Hammer Jammer made two hammer versions that use the rescue blade from the MUT


-
Benchmade Mini Griptillian 555

Benchmade Mini Bugout YellowJacket

Benchmade Mini Bugout Neon Green

-
Nice trio.

-
An Ambassador

-
NICE Benchmade haul. The 555 is wonderful.

-
I broke down and ordered some Surge goodies to dress mine up. Also waiting on my 300m which should be here this weekend.
Oh, and I found a part to fix an old Gerber that had a broken cap lifter
Pics to come when all arrives.
-
Boker Tech Tool 1 in copper, it just looked too good, sorry Bond you'll have to wait

-
@GearedForwards said:
Boker Tech Tool 1 in copper, it just looked too good, sorry Bond you'll have to wait
It is a lovely looking thing, isn't it

I didn't bite the bullet/knife as I don't very often use the other one I have, whatever it's called
(it's red
)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login