Flair Owners Unite!¡!
-
I'm loving all the insights from you to three various Leatherman tools ToolAssembly

What do you think about the comment from lptech a bit further up?
@lptech said:
I recently acquired this specimen, with an interesting feature. Notice the PST II on the handle. A mod or a strange variant? The interesting thing is that both handle dates are 12/99? -
@dks said:
Part of the flair ;) of the LM Flair is all the nice details on it, like the scrolls and the golden colour. If a part of it is damaged it does lose some of that flair.
You really want a mint one if possible, something you can proudly show off and the broken backspring will result in a floppy corkscrew and make it less impressive (I think some other memebrs here had similar issues with the corkscrew).Wait for a good one. They are around and if you buy a damaged one you will still want to buy a better one later anyway.
alright, so for loose corkscrew. It is a pin applied by hand on the backside pushed up thru the hole. The outside of handle is a tiny cap. These tool handles were placed in a fitted jig. The jig pressed on with a long leverage handle. They made a notorious pop sound when applied. So you can take, to that cap, an applied force to secure it tigher. Maybe using a small socket, covering only the cap then tap it with a hammer. I would fold out the components fill the empty handle with a fat pieces as an anvil. Of course having the handle placed on a flat surface first,(make it solid against pin). So it is not a rivet it is a force fit cap. I have done thousands of these. Date code 0699

-
Hey, thanks for sharing that info ToolAssembly

-
@McStitchy said:
Hey, thanks for sharing that info ToolAssembly
Great bit of info

-
@McStitchy said:
Hey, thanks for sharing that info ToolAssembly
you're welcome! I'm giving as much as I can share that may help with fixing simple things. Repairing vintage new looking tools is much harder.. especially when you don't have a replacement 😁 Noting the Flair Corkscrew thing. Because we tried to smack the pin cap twice.the corkscrew would be way too tight.actually unmoveable. The tool I used to tap the cap was specifically made in the tool shop at Leatherman. It was a handheld punch, the end that made contact with the cap was tapered. With what it took to make this I'm certain it was mounted securely and drilled.(drill press) finished with something you would find in a moto tool kit. a tapered abrasive composit. The idea was to not Mar the cap or hit the pin. Those that were tapped by hand had a little bit of a burr between the cap and pin edge. Probably the weakness of a very well built tool. It is almost a No-No to touch the bottle opener with any kind of cloth paper towel, cleaner as it will rub off so easily...
-
@ToolAssembly said:
you're welcome! I'm giving as much as I can share that may help with fixing simple things. Repairing vintage new looking tools is much harder.. especially when you don't have a replacement 😁 Noting the Flair Corkscrew thing. Because we tried to smack the pin cap twice.the corkscrew would be way too tight.actually unmoveable. The tool I used to tap the cap was specifically made in the tool shop at Leatherman. It was a handheld punch, the end that made contact with the cap was tapered inside contact end. With what it took to make this I'm certain it was mounted securely and drilled.(drill press) finished with something you would find in a moto tool kit. a tapered abrasive composit. The idea was to not Mar the cap or hit the pin. Those that were tapped by hand had a little bit of a burr between the cap and pin edge. You can feel it with your fingernail. Probably the weakness of a very well built tool and OH.. It is almost a No-No to touch the bottle opener with any kind of cloth paper towel, cleaner. as it will rub off so easily...screws and component pivot long nuts. They were pre-treated with a liquid catalyst, soaked in a bucket. Scooped from the bucket then dumped and mixed with media in a heated tumbler. Done when the timer goes off. This fine layer was a catalyst for the glue. So if you dripped a drop of glue on the table it would never dry but when it was applied to the nut and the screw was screwed in, it acted like a medium loctite. the inspector was given 3 minutes to adjust the tension otherwise it would set up that quick. If you ever have to tension your tool. must remove screw. Apply a medium loctite in there but not red. And adjusted the tension. Olive oil dip, crc, but you can expect any petroleum based oil to dry out. eventually.
-
I always enjoy your LM assembly stories ToolAssembly

-
Carrying some Flair today...


-
Let's get Flaired up :D



-
Sweet pics amigo

-
-
Thanks pa and Stitchy

Shaw & Jones did 21 years ago anyways
:DIt was actually personalized for my dad with his name on the other side but at least his first and last name is my middle and last
:D -
Oh, that's cool

Did you know? They had Casio watches too


-
Probably a different bunch
this is from the company I work for and they have a different name now
:D -
Ah... I see a pattern emerging :D
-
Is it a brick pattern ???
:D
-
I wish LM had done a better job with the brass plating on the "Flair" extra piece. When I first got mine, I thought it looked strangely worn even though the rest of the tool was in great shape. After some internet sleuthing (e.g. looking at examples here), I can see that most of them seem to have patchy plating 🤷🏻♂️.
-
The one I have is over 20 years old and in real life doesn't look as splotchy as the pics above
I have only ever seen the one example and the splotches may just be from tarnish from over the years

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

