Flair Owners Unite!¡!
-
@McStitchy said:
Hey, thanks for sharing that info ToolAssembly
you're welcome! I'm giving as much as I can share that may help with fixing simple things. Repairing vintage new looking tools is much harder.. especially when you don't have a replacement 😁 Noting the Flair Corkscrew thing. Because we tried to smack the pin cap twice.the corkscrew would be way too tight.actually unmoveable. The tool I used to tap the cap was specifically made in the tool shop at Leatherman. It was a handheld punch, the end that made contact with the cap was tapered. With what it took to make this I'm certain it was mounted securely and drilled.(drill press) finished with something you would find in a moto tool kit. a tapered abrasive composit. The idea was to not Mar the cap or hit the pin. Those that were tapped by hand had a little bit of a burr between the cap and pin edge. Probably the weakness of a very well built tool. It is almost a No-No to touch the bottle opener with any kind of cloth paper towel, cleaner as it will rub off so easily...
-
@ToolAssembly said:
you're welcome! I'm giving as much as I can share that may help with fixing simple things. Repairing vintage new looking tools is much harder.. especially when you don't have a replacement 😁 Noting the Flair Corkscrew thing. Because we tried to smack the pin cap twice.the corkscrew would be way too tight.actually unmoveable. The tool I used to tap the cap was specifically made in the tool shop at Leatherman. It was a handheld punch, the end that made contact with the cap was tapered inside contact end. With what it took to make this I'm certain it was mounted securely and drilled.(drill press) finished with something you would find in a moto tool kit. a tapered abrasive composit. The idea was to not Mar the cap or hit the pin. Those that were tapped by hand had a little bit of a burr between the cap and pin edge. You can feel it with your fingernail. Probably the weakness of a very well built tool and OH.. It is almost a No-No to touch the bottle opener with any kind of cloth paper towel, cleaner. as it will rub off so easily...screws and component pivot long nuts. They were pre-treated with a liquid catalyst, soaked in a bucket. Scooped from the bucket then dumped and mixed with media in a heated tumbler. Done when the timer goes off. This fine layer was a catalyst for the glue. So if you dripped a drop of glue on the table it would never dry but when it was applied to the nut and the screw was screwed in, it acted like a medium loctite. the inspector was given 3 minutes to adjust the tension otherwise it would set up that quick. If you ever have to tension your tool. must remove screw. Apply a medium loctite in there but not red. And adjusted the tension. Olive oil dip, crc, but you can expect any petroleum based oil to dry out. eventually.
-
I always enjoy your LM assembly stories ToolAssembly

-
Carrying some Flair today...


-
Let's get Flaired up :D



-
Sweet pics amigo

-
-
Thanks pa and Stitchy

Shaw & Jones did 21 years ago anyways
:DIt was actually personalized for my dad with his name on the other side but at least his first and last name is my middle and last
:D -
Oh, that's cool

Did you know? They had Casio watches too


-
Probably a different bunch
this is from the company I work for and they have a different name now
:D -
Ah... I see a pattern emerging :D
-
Is it a brick pattern ???
:D
-
I wish LM had done a better job with the brass plating on the "Flair" extra piece. When I first got mine, I thought it looked strangely worn even though the rest of the tool was in great shape. After some internet sleuthing (e.g. looking at examples here), I can see that most of them seem to have patchy plating 🤷🏻♂️.
-
The one I have is over 20 years old and in real life doesn't look as splotchy as the pics above
I have only ever seen the one example and the splotches may just be from tarnish from over the years

-
My new Flair.


-
Hey, congrats Rich

-
@McStitchy said:
Hey, congrats Rich
Thanks :)
I don't think multitools and food mix well, so I doubt I'll use the fork and butter knife. Still, I just had to get this one.
-
It is a good one for collecting, Congrats
I don't think I have ever used mine for food either
I have used it some and the things I have used it for wouldn't taste to good :ahhh Oil, grease and different types of sprays like WD40 or Break Free have been around it and that might leave a bad after taste 
:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
