June Pocket Rocket Challenge
-
DAY 29
The Esquire did the job of clipping zip ties very handily.

-
Day 29

-
Day 29
This ain't no bit driver...

-
Day 29
Looking at the Classic in comparison with the tool that has spent many months in my pocket as a backup at work. I initially got the Micra as a backup for work when I was carrying the Alox Soldier.
Its really 6 in one and half-dozen in the other. What I still like about the Micra is the sturdiness of the tools at this small size. I like the blade better, and the larger scissors have an advantage. What I like about the Classic is that it’s easier to get at the tools, by a large margin.

-
@Sos24 said:
I am frequently surprised by how often members use their knives to sharpen pencils, but I guess if you don’t have a sharpener or want to use the knife it works.Mrs Nix has...**** gasp ****...an electric pencil sharpener.
Me, I prefer a hand-tuned pencil point. (My father always cut his pencils. I liked the way his handwriting looked, so I started doing it too. Although...I'm fond of a mechanical pencil as well.
) -
@Fireman said:
DAY 29 Oh, the shame...
PTC was so dull I could press on the edge of the blade as if it were the nail file. The Sharpmaker got it back in envelope cutting form.
I didn't even realize how dull the main blade had become on my Mini Champ until I started using it more during this challenge. But I've had it for over 20 years and have never sharpened it.
I'm a complete newbie at sharpening knives, but the Victorinox dual knife sharpener put a nice edge back on it (and on the small blade on an Explorer). I don't have the experience to say if it (or I) did a really good job, but it's sharper now so that's improvement!
Anyone with more experience got an opinion on this sharpener?
-
@SteveP said:
Anyone with more experience got an opinion on this sharpener?I have one, but have not used it much.
I'm not fond of "pull-through" sharpeners. They tend to tear out microscopic bits of metal. (This is documented with carbide pull-through sharpeners; I don't know about ceramic sharpeners.) Additionally, pull-through sharpeners only allow for one set angle. This may be perfect for SAKs, but I prefer to freehand sharpen.
In a pinch, I'd use the pull through.
I like the stone element, although I've never achieved a fine edge with it. I think it is a bit coarse (mine feels rough when I use it). I do like the variety of curves and shapes the stone has. I'm sure it'll see some use when I go to sharpen the serrations on my Vic Skipper and Soldier. (I also have a taper diamond rod that might see use on those serrations.)
The Vic sharpener seems pretty hand and easy to stash in a bag or pocket. I think it is pretty good for a 'field tool', but I'm more comfortable with some of my other stones at home. I bet more capable sharpeners may feel differently though. Some guys seem to be able to get a razor edge off a cement block.

-
-
@Nix said:
I have one, but have not used it much.I'm not fond of "pull-through" sharpeners. They tend to tear out microscopic bits of metal. (This is documented with carbide pull-through sharpeners; I don't know about ceramic sharpeners.) Additionally, pull-through sharpeners only allow for one set angle. This may be perfect for SAKs, but I prefer to freehand sharpen.
In a pinch, I'd use the pull through.
I like the stone element, although I've never achieved a fine edge with it. I think it is a bit coarse (mine feels rough when I use it). I do like the variety of curves and shapes the stone has. I'm sure it'll see some use when I go to sharpen the serrations on my Vic Skipper and Soldier. (I also have a taper diamond rod that might see use on those serrations.)
The Vic sharpener seems pretty hand and easy to stash in a bag or pocket. I think it is pretty good for a 'field tool', but I'm more comfortable with some of my other stones at home. I bet more capable sharpeners may feel differently though. Some guys seem to be able to get a razor edge off a cement block.

Carbide pull throughs hog off way too much metal, partially through people using too much force with them and them being misused. They're marketed as all you need, but it'd be like touching up your edge with 100 grit stones...
The ceramic pull through on the Vic is pretty incapable of the same kind of hogging since it's fine ceramic, it's more intended as a 'hone' it's actually the sole reason I bought the sharpener. In my misguided youth I sold off my previous system whenever I upgraded, leaving me with only the Wicked Edge and stones topping out at 600 grit. The Vic has so far proved good at rejuvinating a few blades like my dull old Swisscard with a couple dozen swipes of the pass through so I'm fairly happy with it. The stone is good enough, it's just a step beyond honing, ideally you'd strop or use the pull through before letting the edge need the stone.
Quick aside, so many people are unhappy in Amazon reviews because they expected an easy sharpener and then scratch up or mess up their knives, it's convenient but you still have to know how to actually sharpen to use it, which I think defeats the purpose of the product to some degree (unless they actually include instructions that is).
Overall pretty happy with it... besides it coming apart immediately and needing an hour of love with a micro drive and straight pin.
-
@GearedForwards said:
Carbide pull throughs hog off way too much metal, partially through people using too much force with them and them being misused. They're marketed as all you need, but it'd be like touching up your edge with 100 grit stones...The ceramic pull through on the Vic is pretty incapable of the same kind of hogging since it's fine ceramic, it's more intended as a 'hone' it's actually the sole reason I bought the sharpener. In my misguided youth I sold off my previous system whenever I upgraded, leaving me with only the Wicked Edge and stones topping out at 600 grit. The Vic has so far proved good at rejuvinating a few blades like my dull old Swisscard with a couple dozen swipes of the pass through so I'm fairly happy with it. The stone is good enough, it's just a step beyond honing, ideally you'd strop or use the pull through before letting the edge need the stone.
Quick aside, so many people are unhappy in Amazon reviews because they expected an easy sharpener and then scratch up or mess up their knives, it's convenient but you still have to know how to actually sharpen to use it, which I think defeats the purpose of the product to some degree (unless they actually include instructions that is).
Overall pretty happy with it... besides it coming apart immediately and needing an hour of love with a micro drive and straight pin.
Great info here. I'm currently planning on getting a sharpening system that would do well for Opinel knives, and of course Victorinox as well. Using a carbide pull through I was able to get a nice sharp edge, presumably because there's a full flat grind without a secondary bevel on the Opinel, but you know how rabbit holes can be. Since I was able to get a notable difference, I'm wondering if there are other options besides a) table top systems with clamps or b) a proper set of stones.
Is Vic the way to go for a pull through sharpener, or are there other good options?
-
@GearedForwards said:
The ceramic pull through on the Vic is pretty incapable of the same kind of hogging since it's fine ceramic, it's more intended as a 'hone' it's actually the sole reason I bought the sharpener.I'd like it better if the ceramic elements were cylindrical rods instead of squared off blocks. I've only used the pull-through feature to really, really lightly de-burr an edge. Again, I run into the difficulty that I use the stone freehand (Meaning I sharpen consistently at an angle of 12-60º on any given stroke. ;) ) but the ceramics are set for a specific angle*.
I'll try using the stone element a bit more often. Sometimes a stone smoothes out with a bit of use.
I do like the way the stone and cap can be inserted into the stone's sheath and the sheath used as a handle. Very Vic. Very handy.
- I have a Spyderco Sharpmaker. I usually take the triangular elements out of the base and use them freehand, too. I guess I don't like having to conform to other people's angles.

- I have a Spyderco Sharpmaker. I usually take the triangular elements out of the base and use them freehand, too. I guess I don't like having to conform to other people's angles.
-
@ElevenBlade said:
Is Vic the way to go for a pull through sharpener, or are there other good options?The Spyderco Sharpmaker is a nice tool.


-
@ElevenBlade said:
Great info here. I'm currently planning on getting a sharpening system that would do well for Opinel knives, and of course Victorinox as well. Using a carbide pull through I was able to get a nice sharp edge, presumably because there's a full flat grind without a secondary bevel on the Opinel, but you know how rabbit holes can be. Since I was able to get a notable difference, I'm wondering if there are other options besides a) table top systems with clamps or b) a proper set of stones.Is Vic the way to go for a pull through sharpener, or are there other good options?
I've had great luck with the bottom ring of a coffee mug. A light touch up after breakfast to start the day. Some soup bowls work good too!
-
@Nix said:
The Spyderco Sharpmaker is a nice tool.

When you're as clumsy as me, would you be able to keep the angle steady? Do you just need to keep the blade perpendicular to the base? Is there an advantage to using this over a set of stones? (I'm guessing the answer is yes, and that it's actually easier to maintain a consistent angle) Can it get as sharp as 8000-10,000 grit stones? Am I asking too many questions?

-
@ElevenBlade said:
When you're as clumsy as me, would you be able to keep the angle steady? Do you just need to keep the blade perpendicular to the base? Is there an advantage to using this over a set of stones? (I'm guessing the answer is yes, and that it's actually easier to maintain a consistent angle) Can it get as sharp as 8000-10,000 grit stones? Am I asking too many questions?
You've got the idea: blade stays perpendicular to the base and the edge is stroked down the triangular "rods".
I think it is easier to keep a consistent angle with the Sharpmaker than with stones. (Unless, like me, you treat the rods like stones....)
The Sharpmaker comes with two sets of rods medium (grey) and fine (white). To start, use the corners of the grey rods (more aggressive), then the flats. The switch to white rods, corners first, then flats.
I can get a really nice edge using the white rods. Especially if I strop afterwards. Is it a 10K grit edge? I don't think so. I use a 12K stone to finish my straight razor for shaving. I am guessing that Murray Carter could use the white rods to get a shaving edge, but I don't think I could. I have a small pink ceramic stone that I picked up at a woodworking shop. That beauty is extra-fine and puts a super edge on a sharpened knife. I sometimes go from grey to white to pink.
I haven't settled on any one system. I have water stones, diamond plates, Arkansas stones, Sharpmaker, Edgepro, and some ceramic rods. They all work. Even a good coffee cup will work, but definitely strop the edge...on Carl's belt.

-
@ElevenBlade said:
Great info here. I'm currently planning on getting a sharpening system that would do well for Opinel knives, and of course Victorinox as well. Using a carbide pull through I was able to get a nice sharp edge, presumably because there's a full flat grind without a secondary bevel on the Opinel, but you know how rabbit holes can be. Since I was able to get a notable difference, I'm wondering if there are other options besides a) table top systems with clamps or b) a proper set of stones.Is Vic the way to go for a pull through sharpener, or are there other good options?
If you want to just use a pull through then I'd just get the Vic dual sharpener and make sure you keep on top of your edges, which is pretty easy to do since they made it as portable as a sharpie.
If you want a beginner/intermediate system then the rod systems are where you want to go. The angle is set by the rods, most systems give you at least two different angles to choose from and pack down self contained.
The Sharpmaker is great and was my last system (I regret selling it tbh, I should have kept it to keep my sharpening options more rounded), but if you're unsure what you want and don't want to drop a lot of money to test it then I recommend getting the Lansky Turnbox. It's the same principle as the Sharpmaker but less bells and whistles:
-Two set angles
-Coarse and fine ceramics
-Packs down into the small block of wood that actually makes it a system. It's literally 6 holes drilled into a block of wood.
As for the Sharpmaker, Spyderco does make higher grit rods that will fit it if you really want, they're not the cheapest of things though.
-
@Nix said:
You've got the idea: blade stays perpendicular to the base and the edge is stroked down the triangular "rods".I think it is easier to keep a consistent angle with the Sharpmaker than with stones. (Unless, like me, you treat the rods like stones....)
The Sharpmaker comes with two sets of rods medium (grey) and fine (white). To start, use the corners of the grey rods (more aggressive), then the flats. The switch to white rods, corners first, then flats.
I can get a really nice edge using the white rods. Especially if I strop afterwards. Is it a 10K grit edge? I don't think so. I use a 12K stone to finish my straight razor for shaving. I am guessing that Murray Carter could use the white rods to get a shaving edge, but I don't think I could. I have a small pink ceramic stone that I picked up at a woodworking shop. That beauty is extra-fine and puts a super edge on a sharpened knife. I sometimes go from grey to white to pink.
I haven't settled on any one system. I have water stones, diamond plates, Arkansas stones, Sharpmaker, Edgepro, and some ceramic rods. They all work. Even a good coffee cup will work, but definitely strop the edge...on Carl's belt.

Do... do you at least put the rods flat in the sharpmaker like they intend or do you Nix that approach too?

When are you going to go whole hog and get a Wicked Edge 3.0? We know you still have the storage space

I got my first real strop (well piece of leather dedicated to the purpose) recently with my whittling starter kit, but for the life of me not sure how to cleanly spread the green compund it came with, it's really hard at room temp, do I need to heat it up?

Hopefully it'll do better than a belt does

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
