MT scissors comparison
-
My Micra is pretty good, until I almost ruined it when I tried to mod it. Thankfully I was able to fix it with the loki wrenches. Thanks again, loki.

Nice work, Adam. I appreciate the shout-out and the fact that you used so many materials.

-
I'd be interested in the results of some full size MT's. Great work!
-
Great review of several different tools
I use scissors quite a and usually just rely on SAK scissors but I do have a few of these tools as well and keep a Micra close by at home and a Squirt S4 in my work backpack 
Glad to see so many material and the chart you made is also helpful when comparing all the data together

-
Thanks guys!
I will try to get some more reviews/results out soon. I do plan to include full size MTs also. I have a decent amount of them to try out as well as some more mini scissors based MTs and some mini MTs that include scissors. Hopefully the list will eventually include Surge and Wave scissors.
Also, I will try to relearn some things I use to know how to do with LibreOffice and make some better charts.
-
I might be dreaming here
, but is there a way of having an interactive chart where you pick one or two criteria and it graphs them? Kinda like the "Compare" function some manufacturer's websites have but with graded values rather than yes/no. 
-
I will look into it. It may prove to be beyond my abilities, but I can see the utility of such a function and so I will try to do it.
-
Leatherman Juice CS3

It is my hope that the scissors on the CS3 can be a stand-in for all Juice scissors. If this is thought to be a wrong assumption on my part, please let me know.
Thread - 3
Mason cord - 3
Jute - 3
550 Paracord - 2.5
4 lb monofilament fishing line - 3
0.065" trimmer string - 3
10 lb braided fishing line - 2.5
Denim - 3
Cloth - 3
Tissue - 3
Felt - 3
Cardboard - 3
Plastic bag - 3
Padded envelope - 3
Webbing - 2.5
Zip tie - 2
Nylon rope - 1.5
Stranded copper wire - 3
18 awg copper wire - 3
Plastic container - 2.5
Rubber ball - 3
Leather belt - 0
Cutting out simple pattern on paper - 2.5
Ergonomics - 2.5Total - 64/72
*Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0
*Good scissors. Had a tendency to open up too much, allowing material to get into the region between the pivot and the cutting edge, which leaves a bit of the material uncut. Had some trouble with the thicker, tougher materials.
-
Fantastic thread Adam

I reckon the LM CS3 makes a great compliment to MT's like the Rebar or Alox SAK's as a small, quick way of adding scissors & corkscrew
Nothing like as thorough as your comparison, but I did do a SAK scissors size comparison (as well as blades and saws) a while a back you might find interesting
/post/2197772

-
@Echotech said:
Fantastic thread Adam

I reckon the LM CS3 makes a great compliment to MT's like the Rebar or Alox SAK's as a small, quick way of adding scissors & corkscrew
Nothing like as thorough as your comparison, but I did do a SAK scissors size comparison (as well as blades and saws) a while a back you might find interesting
/post/2197772

Nice collection!
-
Thanks Adam

-
SOG Baton Q1

Thread - 3
Mason cord - 3
Jute - 3
550 Paracord - 3
4 lb monofilament fishing line - 3
0.065" trimmer string - 3
10 lb braided fishing line - 2
Denim - 3
Cloth - 3
Tissue - 3
Felt - 3
Cardboard - 3
Plastic bag - 3
Padded envelope - 3
Webbing - 3
Zip tie - 3
Nylon rope - 2.5
Stranded copper wire - 3
18 awg copper wire - 3
Plastic container - 3
Rubber ball - 3
Leather belt - 3
Cutting out simple pattern on paper - 2.5
Ergonomics - 2Total - 69/72
Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0Excellent cutting scissors! However, the handles are problematic. When I held the tool with the shorter grey handle under my thumb, there was a tendency for the handle to slide towards the pivot. When I held the tool with the longer black handle under my thumb, the tool was sort of pinchy. It may work better in someone else's hand, but I found that the handles impeded my use of the scissors to some degree.
-
More great reviewing

-
nicely done!
-
PST II (unmodded)

Thread - 3
Mason cord - 2.5
Jute - 3
550 Paracord - 2
4 lb monofilament fishing line - 3
0.065" trimmer string - 2.5
10 lb braided fishing line - 2
Denim - 2.5
Cloth - 3
Tissue - 3
Felt - 2.5
Cardboard - 3
Plastic bag - 3
Padded envelope - 3
Webbing - 2
Zip tie - 2.5
Nylon rope - 1.5
Stranded copper wire - 3
18 awg copper wire - 2.5
Plastic container - 3
Rubber ball - 3
Leather belt - 0
Cutting out simple pattern on paper - 3
Ergonomics - 2.5Total - 61/72
Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0I tested the scissors unmodified, which meant the handles tended to collapse when cutting tougher materials. Overall, they are okay scissors. But the newer scissors that appeared with the Zytel MTs and the 2nd Gen Wave are better.
-
Wenger EvoGrip 14 (85 mm)

Thread - 3
Mason cord - 3
Jute - 2
550 Paracord - 1.5
4 lb monofilament fishing line - 3
0.065" trimmer string - 2
10 lb braided fishing line - 2.5
Denim - 2
Cloth - 3
Tissue - 3
Felt - 3
Cardboard - 3
Plastic bag - 2.5
Padded envelope - 3
Webbing - 2
Zip tie - 3
Nylon rope - 2
Stranded copper wire - 3
18 awg copper wire - 2
Plastic container - 2.5
Rubber ball - 2.5
Leather belt - 0
Cutting out simple pattern on paper - 3
Ergonomics - 2Total - 58.5/72
Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0Thick, pliable materials gave it trouble. Did not cut well across part of the edges in my testing. However, I did EDC this SAK during the Delemont Challenge and had no complaints about the scissors' cutting ability.
Let me state, as noted by ReamerPunch, Wenger scissors are annoying in that as you push on one handle the other handle moves also. Victorinox scissors do not do this. -
Victorinox Classic SD (58 mm)

Thread - 3
Mason cord - 2
Jute - 3
550 Paracord - 2
4 lb monofilament fishing line - 3
0.065" trimmer string - 2
10 lb braided fishing line - 3
Denim - 2.5
Cloth - 3
Tissue - 3
Felt - 3
Cardboard - 3
Plastic bag - 3
Padded envelope - 3
Webbing - 2.5
Zip tie - 3
Nylon rope - 1.5
Stranded copper wire - 3
18 awg copper wire - 2
Plastic container - 2
Rubber ball - 3
Leather belt - 0
Cutting out simple pattern on paper - 3
Ergonomics - 3Total - 61.5/72
Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0The Victorinox 58 mm scissors are great scissors that are only limited by their size. Works great with finer, smaller materials.
-
AceCamp 11 in 1

Thread - 1.5
Mason cord - 0
Jute - 0
550 Paracord - 0
4 lb monofilament fishing line - 1.5
0.065" trimmer string - 1
10 lb braided fishing line - 0
Denim - 0
Cloth - 0
Tissue - 0.5
Felt - 0
Cardboard - 2
Plastic bag - 0
Padded envelope - 0
Webbing - 0
Zip tie - 1
Nylon rope - 0
Stranded copper wire - 0
18 awg copper wire - 0
Plastic container - 1.5
Rubber ball - 0
Leather belt - 0
Cutting out simple pattern on paper - 2
Ergonomics - 1Total - 12/72
Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0I should have burned my $10 instead of buying this smurf.
-
Gerber Solstice

Thread - 2
Mason cord - 2
Jute - 2
550 Paracord - 1.5
4 lb monofilament fishing line - 3
0.065" trimmer string - 3
10 lb braided fishing line - 2
Denim - 1.5
Cloth - 1.5
Tissue - 3
Felt - 0
Cardboard - 3
Plastic bag - 1.5
Padded envelope - 3
Webbing - 1
Zip tie - 3
Nylon rope - 2
Stranded copper wire - 3
18 awg copper wire - 3
Plastic container - 3
Rubber ball - 3
Leather belt - 3
Cutting out simple pattern on paper - 3
Ergonomics - 2.5Total - 55.5/72
Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0The Solstice did not cut well, and the drivers tended to bore into my palm. But I was to cut with power when needed.
-
Leatherman Style CS

Thread - 3
Mason cord - 2.5
Jute - 2.5
550 Paracord - 2.5
4 lb monofilament fishing line - 3
0.065" trimmer string - 3
10 lb braided fishing line - 3
Denim - 2
Cloth - 2
Tissue - 2.5
Felt - 2
Cardboard - 3
Plastic bag - 3
Padded envelope - 2.5
Webbing - 2.5
Zip tie - 3
Nylon rope - 2
Stranded copper wire - 3
18 awg copper wire - 3
Plastic container - 3
Rubber ball - 3
Leather belt - 2
Cutting out simple pattern on paper - 3
Ergonomics - 2.5Total - 63.5.5/72
Scoring:
Effectively cuts material with minimal effort = 3
Requires an extra snip or some extra effort = 2.5
Will cut material, but requires holding material taunt or finding sweet spot on scissors = 2
Scissors tends to gnaw through material rather than cut cleanly - 1.5
Will cut material roughly and with great effort - 1
May be able to cut material, but not worth the effort - 0.5
Can not cut material - 0The Style CS is somewhat edgy, pointy in hand. The edges are sharp, but fully meet only near the tips. This flaw prevented it from cutting fabrics and tissue well.
-
The next update will include the test results for the following MTs:
Leatherman Surge (original)
Leatherman Wave (original)
Leatherman Blast/Wave
Ozark Trail/Mossy Oak/Bibury Multiforce
Dewalt MT16
Victorinox SwissTool Spirit
Bibury 10 in 1 Pocket Tool
Skagele/etc... 18 in 1
Bercol/Atech/etc… 15 (or 13) in 1
Suspension NXT
Nextool Flagship Pro
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login