*** The Dean51 30-day ***
-
Is it only day 7 :ahhh? Such an amazing variety of trads. So many great pictures.

Pemberton and Atlas Japan were with me today.

-
Day 8

-
Day 8

-
@GearedForwards said:
Point of perspective, if you live in/are from the US I can see that, but if you live elsewhere then US made doesn't really amount to much other than being more expensive
It's a wide world out there and my understanding is RRs do very well this side of the pond

Respectfully, I think you missed my point, though in terms of selling prices I can only really offer a US perspective. (I apologize for caps, not intended as yelling, but wanted to emphasize certain things and not sure how to underline or do italics on my phone.)
The under-$20 RRs (many closer to $10) are good values for users. In fact, it is difficult to do better AT THAT PRICE POINT.
However, once you get to users in the $50 - $60 range, I think it will be difficult for “premium” RRs to compete with other manufacturers’ offerings IN THE SAME PRICE RANGE (not “more expensive”). These include (but aren’t limited to) US-made Bucks like the 301, 303, 501, 110, and 112; numerous offerings from Case; many Victorinox SAKs; etc.
-
@nate j said:
Respectfully, I think you missed my point, though in terms of selling prices I can only really offer a US perspective. (I apologize for caps, not intended as yelling, but wanted to emphasize certain things and not sure how to underline or do italics on my phone.)The under-$20 RRs (many closer to $10) are good values for users. In fact, it is difficult to do better AT THAT PRICE POINT.
However, once you get to users in the $50 - $60 range, I think it will be difficult for “premium” RRs to compete with other manufacturers’ offerings IN THE SAME PRICE RANGE (not “more expensive”). These include (but aren’t limited to) US-made Bucks like the 301, 303, 501, 110, and 112; numerous offerings from Case; many Victorinox SAKs; etc.
I'm not entirely sure what your point is then, if it isn't about it being US-made, then... it's about name recognition? Which I can get, but isn't really about the quality of the knife for the price (which should matter). Though if it was name recognition I'm not sure why mention US made at all.
If it's about Rough Rider breaking into a higher price/production point then I totally see that, that's a hard transition for any company to make.
On price points, outside the US (Or the UK at least) by and large I don't think they're really competing all that much, Case etc. tend to be incredibly expensive for what you get here. If this works as a touchstone at all, a standard, no grooves Buck 110 is $100 from probably one of (if not the) most popular UK knife retailers. Small Case knives typically run $80+ for whatever mystery steel they use. When it comes down to value, named steel and reviews carry more weight (at least to me personally) than the name on it being x or y
Didn't mean to offend with any of this for the record, just like the discussion

-
@GearedForwards said:
If it's about Rough Rider breaking into a higher price/production point then I totally see that, that's a hard transition for any company to make.Pretty much this; that I think they are going to struggle to make any inroads with their higher priced offerings. (Though, as I’ve said, their low price/value offerings are a very good value.)
Also sounds like you are paying substantially more for Buck & Case over there than the RR reserve?
No offense taken here. All good discussion.

-
@NutSAK said:
Whoa, wait....I'm not even wandering around that pool wrapped in a towel! I'm still talking about Cases that have the TB prefix, not Tony Bose customs. Like the $60 Swayback Jack (TB62117CV) shown below.Go here and look for the Case models that have the "TB" prefix. Those were developed in collaboration with Tony Bose: https://www.casexx.com/Library/PatternNumbers.asp

Oh, that's right! I do remember seeing them here and there, and am wondering how good are they. I remember seeing a good number of Tony Bose Tribal lock jack knife available in different website, kinda wonder there is any merit getting that? What's special about this lock vs regular lockback?
@nate j said:
My opinion is that they do make some decent users in the $10 - $20 range, and they are tough to beat at that price point.They have come out with a “reserve” line featuring D2 steel and selling for more like $50 - $60. I haven’t pulled the trigger on one of these yet, but I predict they actually won’t sell as well. I think most folks (including me) and would rather have a USA-made Buck or Case for that price.
I do have two Rough Ryder Reserve knives, and I gonna share some pix about them.
I think their degree of fit and finish is pretty high(almost on par with GEC, everything perfectly flush and polished), with really smooth walk and talk(brass bushing) but design is kinda bulky and not very space conscious.
If they could have better and classier designs, they can be real competitor to GEC. But for now, I would prefer the RRR offerings over Lionsteel or Boker "modern" traditionals, since it has much better value and finishing.
-
@GA1dad said:
That is an interesting perspective that I had never considered,, thanks for sharing it.I think we may have this discussion in any other thread, but recent tightening of knife laws around the world does play a hand in reviving the need for traditional knives, especially under 3" and unlocking.
@Borg said:
Had to google that, certainly an interesting shape
What a beauty

Day 7, S&M 60 and Cami 70

Wow, Borg, love these two!

Calf Roper in Ironwood for Wednesday and a WW2 Imperial Navy Utility knife

Another GEC 66! If I see more 66, I swear I would pass out in front of the screen. So good!

More beauties!!!!

Bull Buster on patrol...
Porch perimeter secure, folding chair in optimal position, cat water dish full and the pecan tree is still on the same compass bearing....

It's Miller Time! :D
Always like how carefully you setup the photo op, very nice shot!
-
GEC Stockyard Whittler and the Mustang
David, I think it was about a year or two ago I asked you and Steve(possibly Dean too) which one of GECs would you consider is quintessential, and I remember one of them being 74 Mustang. Do you all still feel the same or would you think differently now?
I read on BF most folks seem to consider 15 and 23 as quintessential, but I love my 74 just as much, and can totally see that as being one of the tops.
@GA1dad said:
This evening I had to enlist the help of a non-traditional( per the rules ). The Schrade might have been able to whittle the cork out,,, but it was not the tool for the job.Quite like that Schrade, though it may have faded out a little. The scrimshaw on those are quite nice and eye pleasing.
@nate j said:
However, once you get to users in the $50 - $60 range, I think it will be difficult for “premium” RRs to compete with other manufacturers’ offerings IN THE SAME PRICE RANGE (not “more expensive”). These include (but aren’t limited to) US-made Bucks like the 301, 303, 501, 110, and 112; numerous offerings from Case; many Victorinox SAKs; etc.@GearedForwards said:
I'm not entirely sure what your point is then, if it isn't about it being US-made, then... it's about name recognition? Which I can get, but isn't really about the quality of the knife for the price (which should matter). Though if it was name recognition I'm not sure why mention US made at all.If it's about Rough Rider breaking into a higher price/production point then I totally see that, that's a hard transition for any company to make.
On price points, outside the US (Or the UK at least) by and large I don't think they're really competing all that much, Case etc. tend to be incredibly expensive for what you get here. If this works as a touchstone at all, a standard, no grooves Buck 110 is $100 from probably one of (if not the) most popular UK knife retailers. Small Case knives typically run $80+ for whatever mystery steel they use. When it comes down to value, named steel and reviews carry more weight (at least to me personally) than the name on it being x or y
Didn't mean to offend with any of this for the record, just like the discussion

All interesting reads here, and since I do collect a handful of Case/Buck/Vic in the 50-100 price points and a few RRRs, maybe I could offer a few cents here.
I think GearedForwards bring a really valid point here, for rest of the world, when sentimental value, brand loyalty and warranty program to traditional US brands are not the same as domestic US, these RRRs do offer decent value as an alternative, if not better.
Of 2 dozen Buck and Case I owned, 70-80% do come with slight imperfection one way or another(uneven grind, heavy rub, poor centering, play and grinding action), though I can't speak for all the RRRs, but of the 2 I have, they have been perfect in execution(no gaps, play, grind issue, great crisp walk and talk, pull of 6.5, perfect centering and flush of materials). The only complain I have is the heavy liner and bushing, if they could slim down the package a little bit, they will be perfect in every way and be in direct competition with GEC(at least from my humble prospective).
-
No4 carbone with forced patina and tea stained handle for day 8, with a Squirt PS4 riding shotgun

-
Day 8
An instant favourite of mine; Case small Texas Jack.

-
Day 8: No. 8 with sassafras root, cut up for tea.

-
Day 8
At the office with good 'ol 66.

-
<u>Day 8</u>








A double feature today, a Rough Ryder Reserve 001 Easy open(blue background) and 008 Stockman(red background). Overall I am quite happy with the fit and finish, but I am hoping they could minimize the width of the bushings and brass liners. RR has been known to be offering good value traditionals at an inexpensive price, and this new line of Rough Ryder Reserve is probably their attempt to open mid-high end market with supposedly better workmanship and material.
-
Very nice!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



