Gerber Mr. Pinchy Multi Plier Club
-
@McStitchy said:
A special thanks to Greg for helping me out on this one

Nice example!!

-
@McStitchy said:
A special thanks to Greg for helping me out on this one

Nice color contrast.

-
(´-`).。oO( It's been a while since I revised the chart last time. )
Since then, I've gotten some unique Mr. Pinchys.
I will introduce them, Unidentified Pinchy Objects, and revise the chart in a few days. σ(^0^ )As <u>ReamerPunch said</u>, it may proper to post new thread. Oh, but it is difficult for me because I (and my assistant Google translation) are not good at English. So I hope ReamerPunch would make new thread of Mr. Pinchy timeline. Please feel free to use my posts and data.
Until then, please forgive me to post UPOs in this thread. ( ><)Before that, I will repost Mr. pinchy component catalog again.
I revised a little, but it is almost same as I posted <u>before</u>. Please right click to download.
I also put same pdf version catalog, small file size, at the end of this post.By the way, I found one of Mr. Pinchy on ebay.
The seller is describing their item as “Version 2.0 with M1 Patent mark, has unique tool the Awl, P2 Jaws/Pliers".
I'm glad the seller read this thread, and referred to my post.
But, hey dear seller, this chart and term is not common knowledge. You may need to guide folks to M.T.o. ヽ(´▽`) -
Thank you hiraboo for these updates.

This information is most valuable for collectors and clearly shows the variations.
I agree that this should be added as a new tread sticky so it will always be easy for people to find in the Gerber forum.
-
Thank you very much Hiraboo for creating and sharing these charts and info, this is awesome

With all your knowledge about the Gerber MPs, would you be able to put an estimated timeline to the models/variations?
Without any date code stamping this would be fairly difficult I guess :P
-
Thank you warm words. ( ´͈ ᵕ `͈ )
But my work relies on the great achievement of J-sews and gregozedobe. What I did is just to visualize them.As you said, it is hard to determine the timeline. I think I can only guess when the particular model has appeared looking closely to pictures on Gerber catalogs, or sellers advertisement on magazines. But I don't have catalogs from that time at all. ┏(-_-;)┓
Of course, Professor Greg knows all the timelines as usual.
But he just forgets where his notes are. (ノД) ( ´ー)。о (Sorry Greg, I'm just kidding.)UPO 1 / 20
Black FISKARS with P-8n pliersAlmost all FISKARS models have a utility blade instead of a can opener.
P-8n pliers is shorter than normal(P-8N) needle nose pliers.
So P-8n pliers is not overhang when sliding to inside.
-
@hiraboo said:
Of course, Professor Greg knows all the timelines as usual.
But he just forgets where his notes are. (ノД) ( ´ー)。о (Sorry Greg, I'm just kidding.)Thanks for the organising of all that detailed info on all the variations. Gerber certainly did like to alter their multi-tools as time went on.
No problem (my notes on Gerber dates simply do not exist (or I've totally forgotten I have them, which amounts to the same thing ;) ).
I have some idea of the order a lot of the changes happened, but no real knowledge of the dates they happened.Some of the catalogues I've seen pictures of haven't been very helpful in establishing timelines, as the actual production tools had significant differences to some of the ones pictured in the catalogues. I think they were most likely pre-production mock-ups built just for the catalogues.
-
@hiraboo said:
Thank you warm words. ( ´͈ ᵕ `͈ )
But my work relies on the great achievement of J-sews and gregozedobe. What I did is just to visualize them.As you said, it is hard to determine the timeline. I think I can only guess when the particular model has appeared looking closely to pictures on Gerber catalogs, or sellers advertisement on magazines. But I don't have catalogs from that time at all. ┏(-_-;)┓
Of course, Professor Greg knows all the timelines as usual.
But he just forgets where his notes are. (ノД) ( ´ー)。о (Sorry Greg, I'm just kidding.)UPO 1 / 20
Black FISKARS with P-8n pliersAlmost all FISKARS models have a utility blade instead of a can opener.
P-8n pliers is shorter than normal(P-8N) needle nose pliers.
So P-8n pliers is not overhang when sliding to inside.
Thank you Hiraboo

And that's a very cool iteration of a needle nose Pinchy
-
@gregozedobe said:
...
Some of the catalogues I've seen pictures of haven't been very helpful in establishing timelines, as the actual production tools had significant differences to some of the ones pictured in the catalogues. I think they were most likely pre-production mock-ups built just for the catalogues.A common problem on packaging too saving the costs for taking new pictures and making prints etc.
-
Hearing discussion, I learned a lot. Thank you very much. (´∇`)
I hope someone will make breakthrough about timeline !UPO 2 / 20
V5 FISKARS with P-8B PliersI think this model is the same as m47mu74nt reported in that thread earlier.
<u>[HELP] Identification : Fiskars Pliers</u>M P E
Small letters are engraved. The name of the screw manufacturer ? -
Maybe it could be EMP

They specialize in fasteners, studs, pins, rivets & bolts...established in 1981
https://www.industrynet.com/listing/339652/emp-manufacturing-corp
They don't have a web site, but they have a respectable facility: https://bit.ly/3hvBN3s -
Max Stone
I've been wondering about that for a long time. (´⌒`;)
I am very happy to know EMP. Σ(゚∇゚;)!!
Thank you very much !UPO 3 / 20
P-6 Pliers Black ModelP-6 and P-7 pliers have quite similar shapes. Please see the catalog above.
I named those as if P-6 was earlier model than P-7. But I'm not sure if that's correct. I may change this order if I have new discoveries.They had eliminated the constriction from the pliers since P-6 / P-7 pliers.
So P-6 and P-7 pliers are also quite similar in shape to P-8B pliers.To distinguish P-6 / P-7 pliers from P-8B pliers easly, you may attention the button head screws on the slider.
All P-8B pliers models have round-headed rivets on the slider. There are no exceptions so far.I have never seen a P-7 pliers BLACK model. I'm looking for it !
-
Nice

I have a BO P6er too


-
McStitchy
Thank you for the cool photo. (゚o゚*)
Let's organize "P-6 BO owners club" ! ( ̄∇+ ̄)vUPO 4 / 20
Black FISKARS with P-4 PliersThe previous owner wrote "FKF" on the handle. It was engraved. I am sad because I can't erase it.
An isomorphic SS FISKARS model was reported by gerleatherberman before.
/post/1887382
/post/2003730 -
UPO 5 / 20
P-5 Pliers Black model with FileOh... The can opener and the large flat-head screwdriver are broken. :'(
P-5 pliers are very similar to P-4. They are same shape except the pivot bushing.
I made the <u>chart</u>, attentioning when they changed the alternate component (utility blade/file).
I thought that they changed the utility blade to the file while they were making P-5 pliers models.
So looking the chart, it seemed that they repealed the pivot bushing once (since P-3 pliers), then they suddenly and temporary revival it.SteveC reported P-5 pliers black model with the utility blade before.
/post/2091084But about the utility blade / file, it seems not to be a simple story.
I will mention it after. -
Hello hiraboo, very nice BO Multi-Plier

I only have one BO model, which looks like the same model as yours:


I am fortunate that the tools are still OK :D


I am not the original owner, but I expect that the tools are all original.

-
Max Stone
I was pretty surprised more than you expected. ( ̄□ ̄;)!!
Wow quite same situation, same angle !Whenever I got a new unknown model of Mr. Pinchy, I always wondered if it was modified by previous owner. I am very happy you have the same model. It is evidence this model was sold as it was.
And now I can confirm the can opener of this model have the flat craw.
Thank you very much ! ヾ(☆´3`)ノシUPO 6 / 20
Reconditioned ModelThis model was based on V5.
There may be other models based on other version."Reconditioned" was printed on the serrated blade side.
V5 models usually have the M-4 type patent marking. But this model have M-2.
This is clearly an irregular model. So I will not put it in the next chart.
I picked up this image from ebay. It is probably not NIB. May I call it RIB ?
-
Thank you for all the work Hiraboo.
I wasn't really aware of the Fisker branded versions. I do have a "Carolina Knife and Tool" version of the Multiplier somewhere, but that is made to a very different (lower) quality than the Gerbers.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login