Gerber Mr. Pinchy Multi Plier Club
-
Thank you very much Hiraboo for creating and sharing these charts and info, this is awesome

With all your knowledge about the Gerber MPs, would you be able to put an estimated timeline to the models/variations?
Without any date code stamping this would be fairly difficult I guess :P
-
Thank you warm words. ( ´͈ ᵕ `͈ )
But my work relies on the great achievement of J-sews and gregozedobe. What I did is just to visualize them.As you said, it is hard to determine the timeline. I think I can only guess when the particular model has appeared looking closely to pictures on Gerber catalogs, or sellers advertisement on magazines. But I don't have catalogs from that time at all. ┏(-_-;)┓
Of course, Professor Greg knows all the timelines as usual.
But he just forgets where his notes are. (ノД) ( ´ー)。о (Sorry Greg, I'm just kidding.)UPO 1 / 20
Black FISKARS with P-8n pliersAlmost all FISKARS models have a utility blade instead of a can opener.
P-8n pliers is shorter than normal(P-8N) needle nose pliers.
So P-8n pliers is not overhang when sliding to inside.
-
@hiraboo said:
Of course, Professor Greg knows all the timelines as usual.
But he just forgets where his notes are. (ノД) ( ´ー)。о (Sorry Greg, I'm just kidding.)Thanks for the organising of all that detailed info on all the variations. Gerber certainly did like to alter their multi-tools as time went on.
No problem (my notes on Gerber dates simply do not exist (or I've totally forgotten I have them, which amounts to the same thing ;) ).
I have some idea of the order a lot of the changes happened, but no real knowledge of the dates they happened.Some of the catalogues I've seen pictures of haven't been very helpful in establishing timelines, as the actual production tools had significant differences to some of the ones pictured in the catalogues. I think they were most likely pre-production mock-ups built just for the catalogues.
-
@hiraboo said:
Thank you warm words. ( ´͈ ᵕ `͈ )
But my work relies on the great achievement of J-sews and gregozedobe. What I did is just to visualize them.As you said, it is hard to determine the timeline. I think I can only guess when the particular model has appeared looking closely to pictures on Gerber catalogs, or sellers advertisement on magazines. But I don't have catalogs from that time at all. ┏(-_-;)┓
Of course, Professor Greg knows all the timelines as usual.
But he just forgets where his notes are. (ノД) ( ´ー)。о (Sorry Greg, I'm just kidding.)UPO 1 / 20
Black FISKARS with P-8n pliersAlmost all FISKARS models have a utility blade instead of a can opener.
P-8n pliers is shorter than normal(P-8N) needle nose pliers.
So P-8n pliers is not overhang when sliding to inside.
Thank you Hiraboo

And that's a very cool iteration of a needle nose Pinchy
-
@gregozedobe said:
...
Some of the catalogues I've seen pictures of haven't been very helpful in establishing timelines, as the actual production tools had significant differences to some of the ones pictured in the catalogues. I think they were most likely pre-production mock-ups built just for the catalogues.A common problem on packaging too saving the costs for taking new pictures and making prints etc.
-
Hearing discussion, I learned a lot. Thank you very much. (´∇`)
I hope someone will make breakthrough about timeline !UPO 2 / 20
V5 FISKARS with P-8B PliersI think this model is the same as m47mu74nt reported in that thread earlier.
<u>[HELP] Identification : Fiskars Pliers</u>M P E
Small letters are engraved. The name of the screw manufacturer ? -
Maybe it could be EMP

They specialize in fasteners, studs, pins, rivets & bolts...established in 1981
https://www.industrynet.com/listing/339652/emp-manufacturing-corp
They don't have a web site, but they have a respectable facility: https://bit.ly/3hvBN3s -
Max Stone
I've been wondering about that for a long time. (´⌒`;)
I am very happy to know EMP. Σ(゚∇゚;)!!
Thank you very much !UPO 3 / 20
P-6 Pliers Black ModelP-6 and P-7 pliers have quite similar shapes. Please see the catalog above.
I named those as if P-6 was earlier model than P-7. But I'm not sure if that's correct. I may change this order if I have new discoveries.They had eliminated the constriction from the pliers since P-6 / P-7 pliers.
So P-6 and P-7 pliers are also quite similar in shape to P-8B pliers.To distinguish P-6 / P-7 pliers from P-8B pliers easly, you may attention the button head screws on the slider.
All P-8B pliers models have round-headed rivets on the slider. There are no exceptions so far.I have never seen a P-7 pliers BLACK model. I'm looking for it !
-
Nice

I have a BO P6er too


-
McStitchy
Thank you for the cool photo. (゚o゚*)
Let's organize "P-6 BO owners club" ! ( ̄∇+ ̄)vUPO 4 / 20
Black FISKARS with P-4 PliersThe previous owner wrote "FKF" on the handle. It was engraved. I am sad because I can't erase it.
An isomorphic SS FISKARS model was reported by gerleatherberman before.
/post/1887382
/post/2003730 -
UPO 5 / 20
P-5 Pliers Black model with FileOh... The can opener and the large flat-head screwdriver are broken. :'(
P-5 pliers are very similar to P-4. They are same shape except the pivot bushing.
I made the <u>chart</u>, attentioning when they changed the alternate component (utility blade/file).
I thought that they changed the utility blade to the file while they were making P-5 pliers models.
So looking the chart, it seemed that they repealed the pivot bushing once (since P-3 pliers), then they suddenly and temporary revival it.SteveC reported P-5 pliers black model with the utility blade before.
/post/2091084But about the utility blade / file, it seems not to be a simple story.
I will mention it after. -
Hello hiraboo, very nice BO Multi-Plier

I only have one BO model, which looks like the same model as yours:


I am fortunate that the tools are still OK :D


I am not the original owner, but I expect that the tools are all original.

-
Max Stone
I was pretty surprised more than you expected. ( ̄□ ̄;)!!
Wow quite same situation, same angle !Whenever I got a new unknown model of Mr. Pinchy, I always wondered if it was modified by previous owner. I am very happy you have the same model. It is evidence this model was sold as it was.
And now I can confirm the can opener of this model have the flat craw.
Thank you very much ! ヾ(☆´3`)ノシUPO 6 / 20
Reconditioned ModelThis model was based on V5.
There may be other models based on other version."Reconditioned" was printed on the serrated blade side.
V5 models usually have the M-4 type patent marking. But this model have M-2.
This is clearly an irregular model. So I will not put it in the next chart.
I picked up this image from ebay. It is probably not NIB. May I call it RIB ?
-
Thank you for all the work Hiraboo.
I wasn't really aware of the Fisker branded versions. I do have a "Carolina Knife and Tool" version of the Multiplier somewhere, but that is made to a very different (lower) quality than the Gerbers. -
Gareth
Thank you for information about Carolona Knife & Tool.
Wow you have very unique tool ! ;)
In this thread, gerleatherberman reported these tools before.
/post/1948957Also there are some threads about these tools.
・Carolina Knife and Tool find.
/topic/23946・What...? Carolina Knife and Tool - Gerber looking Multi-tool
/topic/48441I posted this note in other thread. About relation between Gerber, Carolina Knife & Tool, and Blackie collins. Please right click to download.
Today I am so tired.
I will introduce UPO tomorrow. -
UPO 7 / 20
P-3 and P-4 mixed pliersI have seen some mixed models, such as M-3 patent marking on one handle and M-4 on the other. Or one handle has double lined font "GERBER", the other has single lined.
Now I find P-3 and P-4 mixed pliers. Wow...All P-3 pliers models have M-2 patent marking, instead early P-4 have M-3 so far.
This model has M-3 patent marking.
So it is certain that this model stands by the double border (P-3 to P-4 pliers / M-2 to M-3 marking).All P-3 and early P-4 pliers models have the utility blade instead of the file.
But this model has the file. I think it is slightly early event in timeline. A mysterious point. -
A very good looking Multi-Plier hiraboo

I think it is normal to see overlap between tool and design changes, maybe up to a year or longer, as they use up production stock and phase in changes.
It is a shame that there are no date codes to help put a timeline to each change, but with all the examples you are finding, and the progression (order) of each change mapped, it may be possible to create a master reference table based on your excellent diagrams, to help show what combination of tools and features are possible? -
Max Stone
Thank you for your thought-provoking opinions.

I was very encouraged.Please go out with a little play. (o≧▽゚)o
I think, so far, there are these subtypes of each component.-
Surface finish 3types.
-
Pliers 10types.
-
Nail nick position 2types x 2handles.
-
Handle cut-out 2types x 2handles.
-
Lanyard 3types.
-
Alternate component 3types.
-
Patent marking 4types.
-
Font of GERBER 2types x 2handles.
-
Can opener craw 2types.
-
Joining method 3types.
-
Scale 2types.
The number of combinations is the product of all of these.
There are some combinations that are not possible in practice, but let's simply calculate.3 x 10 x 2 x 2 x 2 x 2 x 3 x 3 x 4 x 2 x 2 x 2 x 3 x 2
= 829,440In calculation, there may be 829,440 models ! Σ(ОД○*).
I regret having calculated. (ノ゚ο゚)ノUPO 8 / 20
P-3 Pliers and M-3 Patent MarkingThis is P-3 pliers. The pliers of this model has rough surface.
I have other P-3 models that have more smooth surface.
It may be possible that pliers can be subdivided to more detailed versions. But I will not consider it this time...
Maybe someday.I wrote "All P-3 pliers models have M-2 patent marking..." in previous post yesterday.
But I find the unusual model that has P-3 pliers and M-3 patent marking.
That's one small step for man, one giant leap for Pinchology. -
-
Hello hiraboo, that is a lot of combinations!
I was thinking a table like this?
Still incomplete, but you can add each feature that is found for each Plier type.
With this table, you will be able to see how each feature develops and maps to each Plier type.
I will PM you to send the spreadsheet (too large to attach here) that you are welcome to use. It does have your excellent pictures


-
Max Stone
I can't believe you create this amazing chart in such a short amount of time.

Thank you for your hard work, spending time to do that.
I am very impressed this "International cooperation project".But I apologize to you that I should have explained more.
I also created my chart <u>before</u>. And my explanation about "Unidentified Pinchy Objects" was dependent on this↓ chart.
Pinchology rev5
Please right click to download.The reason for "Unidentified" is they are not included in this chart.
Without this chart and explanation, I think my post didn't make sense to many members. I am sorry.
Now I am preparing to revision my 5th edition chart to 6th, including them.
The easy-to-understand table you made was very helpful.
Thank you very much !This is 5th edition chart PDF version same as above.
↓
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login