I made a thing...
-
The good thing with the slipper blocks, is that they are movable, and that they maintain the same working height with the saw. Also good for chocking a wonky branch (one on front rail, one on the back).
-
@Syncop8r said:
Big ones no, small diameter ones yes. The smaller ones also sit too low in relation to the cutting slots.
The legs get in the way of the saw body although not so much since I trimmed them back.I have ideas for a Mk.III to overcome all these issues but it needs more thought...
I have a home made sawhorse that I use some thick shock cord and a yachting cleat to hold the log down while I'm sawing (run the shock cord under then around the log and under again to the cleat for better grip on the log).
This works OK, but I prefer my Blokka cantilever saw horse as it is quicker to use.
Sorry, I can't find any current links for it, they stopped making them years ago, but the operating principle is the same as the "Saw Jaw":
https://arbtalk.co.uk/forums/topic/44577-sawhorses-some-new-improvements/?tab=comments#comment-698040
http://www.bsbgardenmachinery.com/chainsaws---log-splitters.html (scroll down to the video) -
I present to you..... the Buckhorse Mk.III!

A friend suggested I forget trying to make the crossed-over legs hold the log and instead make something that holds the log, then make the legs fold from that. So I took inspiration from my folding sawhorse design: /post/1730251
This took a bit of thinking and was harder to construct but it in a way it's simpler, it looks cleaner and works much better. There are no big pieces sticking up to get in the way of the chainsaw and the logs/branches are well supported.

It is made mostly from old pallets. A square rail at 45° creates a V shape for blocks to sit on with 50mm gaps between them (for the saw to pass through) every 300mm. The blocks (and the legs on one side) are fixed to the rail with long galvanised screws with hex heads. I used the same type of hinges as in the sawhorse except bigger and with a longer pin which means they are much sturdier. Each leg is 20° from vertical so there wasn't much room to get some of the screws in.

I was going to use rope or a chain to stop the legs from spreading but it isn't necessary. This thing ain't moving.
When you pick it up the legs naturally fold for easy storage.

-
The improvements continue ....

-
Note to self: Never lend anything to anyone. ::)


-
@gregozedobe said:
Are you only just learning that lesson ? I found that out decades ago, and it has saved me from a lot of annoyance ever since
Well I did learn that lesson, but I like to help people and I'm optimistic that others are as skilled or careful as me.
I know, silly me.
-
@Syncop8r said:
Well I did learn that lesson, but I like to help people and I'm optimistic that others are as skilled or careful as me.
I know, silly me.
When the urge to help overcomes me I just do whatever it is that needs to be done, that way I know my tools are (relatively) safe.
One exception is changing a flat tyre. I will loosen the tight wheel nuts for them, and explain in detail how to do it (and provide muscle for the actual wheel removal & replacement if really necessary), but if the driver doesn't want to make any effort whatsoever then I am willing to leave them to whatever plan they had to fix their problem. Of course if they are truly physically unable I will help them out as much as needed.
It may sound harsh, but the situation is literally is not MY problem, and if you want to wait around for however many hours it will take for the people who you have paid to do this work (eg roadside assistance), then I am perfectly willing and able to follow your plan to the letter.
-
If I change a tyre for someone I try to teach them how to do it as well.
Once I had a flat tyre and friends on board helped. A few days or perhaps a week or so later (before I fixed the tyre and swapped it back in) I heard a noise coming from one of the wheels. The nuts were on backwards and had worked their way loose so that the wheel was starting to wobble. ::)
-
@Syncop8r said:
If I change a tyre for someone I try to teach them how to do it as well.Once I had a flat tyre and friends on board helped. A few days or perhaps a week or so later (before I fixed the tyre and swapped it back in) I heard a noise coming from one of the wheels. The nuts were on backwards and had worked their way loose so that the wheel was starting to wobble. ::)
Obviously whoever taught your friends how to change a wheel didn't do a very good job. :(
I'm sure when you are teaching someone then putting the nuts on the right way round is part of the learning process. If I am able to I usually try to explain why something needs to be done a particular way, in the hope they might remember it better when the time comes that they have to do it by themselves (without tuition).
-
@gregozedobe said:
When the urge to help overcomes me I just do whatever it is that needs to be done, that way I know my tools are (relatively) safe.One exception is changing a flat tyre. I will loosen the tight wheel nuts for them, and explain in detail how to do it (and provide muscle for the actual wheel removal & replacement if really necessary), but if the driver doesn't want to make any effort whatsoever then I am willing to leave them to whatever plan they had to fix their problem. Of course if they are truly physically unable I will help them out as much as needed.
It may sound harsh, but the situation is literally is not MY problem, and if you want to wait around for however many hours it will take for the people who you have paid to do this work (eg roadside assistance), then I am perfectly willing and able to follow your plan to the letter.

That's the only way they'll learn. Well, if they even get to learn. It's amazing how some people can forget how to do incredibly easy tasks when they only need to do it once or twice a year...

-
@Syncop8r said:
If I change a tyre for someone I try to teach them how to do it as well.Once I had a flat tyre and friends on board helped. A few days or perhaps a week or so later (before I fixed the tyre and swapped it back in) I heard a noise coming from one of the wheels. The nuts were on **backwards **and had worked their way loose so that the wheel was starting to wobble. ::)
Were those friends european?...

-
Good for you Greg. Its amazes me how when someone says they need help it really means do it for me. While I'm always happy to lend a hand I'd hope they'd want to learn or at the very least join in since its there problem.
As you say, "the situation is literally not my problem"
. Its not harsh at all.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login