Thursday Surgeday
-
An OG SURGE!!!!! For TDSD




-
I had to bring my kit home today and noticed that the OG Surge is in a terrible state ::)

I'm back to work on Monday and need to give it some TLC. Does anyone have some tips for cleaning etc.

I don't have the tools to take it apart, nor the ability to reassemble it
Your expert advice and wisdom is appreciated



-
You can open most of the tools up and run it through a dish washing cycle if you have a dishwasher
If not then run hot water un a sink with washing up liquid, agitate the water and let it soak. Repeat the process and scrub it with a toothbrush this go round
after that, dry it and take some compressed air (canned or air compressor) and get all the water out then lube it back up 
You don't have to follow the first step of the soak but it does deep clean it a little more with the soak

-
@Poncho65 said:
You can open most of the tools up and run it through a dish washing cycle if you have a dishwasher
If not then run hot water un a sink with washing up liquid, agitate the water and let it soak. Repeat the process and scrub it with a toothbrush this go round
after that, dry it and take some compressed air (canned or air compressor) and get all the water out then lube it back up 
You don't have to follow the first step of the soak but it does deep clean it a little more with the soak

Cheers Poncho

I'll whack it in the dishwasher tomorrow and go and buy a "can of air"

Any favoured lube (I said favoured, not flavoured in case "you know who turns up?)

-
Just some 3 in 1 oil. The dry lube type is good as it seems wax based and makes the whole tool feel silky smooth
but any type of oil will work 
-
-
I followed your advice Poncho and stuck the Surge through the dishwasher ;)
Result: I don't think it's ever been that clean :ahhh :ahhh :ahhh (thanks for the tip
)I couldn't get the 3 in 1 dry lube so I had to use the normal stuff ::)
The Spartan helped open the oil and then kept the Surge company in the sun :D

-
Glad it worked
The oil will keep any residual water left in from forming rust but the sun bathing will help get all the moisture out even better 
-
I've not been on here for a few weeks as work is getting rather chaotic at Heathrow (red list terminals and a distinct lack of staff ::) )
Whilst at work I gave the OG Surge a sharpening and then it hung out with some friends in the tool room

Stay safe out there awl...


-
Great pic, Surge
hope work calms down for you 
I forgot to carry a Surge today

-
-
I sheath carry and never notice the Surge being any heavier in it than a Wave or a Supertool :D
-
-
That blackened lettering looks nice

-
I was glad I had the Surge in the car when we went for a picnic at the lake today...

-
Hope it was a great outing

Great pic

-
Poncho... it was great. -
Glad to hear it

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



