Gerber Mr. Pinchy Multi Plier Club
-
Maybe it could be EMP

They specialize in fasteners, studs, pins, rivets & bolts...established in 1981
https://www.industrynet.com/listing/339652/emp-manufacturing-corp
They don't have a web site, but they have a respectable facility: https://bit.ly/3hvBN3s -
Max Stone
I've been wondering about that for a long time. (´⌒`;)
I am very happy to know EMP. Σ(゚∇゚;)!!
Thank you very much !UPO 3 / 20
P-6 Pliers Black ModelP-6 and P-7 pliers have quite similar shapes. Please see the catalog above.
I named those as if P-6 was earlier model than P-7. But I'm not sure if that's correct. I may change this order if I have new discoveries.They had eliminated the constriction from the pliers since P-6 / P-7 pliers.
So P-6 and P-7 pliers are also quite similar in shape to P-8B pliers.To distinguish P-6 / P-7 pliers from P-8B pliers easly, you may attention the button head screws on the slider.
All P-8B pliers models have round-headed rivets on the slider. There are no exceptions so far.I have never seen a P-7 pliers BLACK model. I'm looking for it !
-
Nice

I have a BO P6er too


-
McStitchy
Thank you for the cool photo. (゚o゚*)
Let's organize "P-6 BO owners club" ! ( ̄∇+ ̄)vUPO 4 / 20
Black FISKARS with P-4 PliersThe previous owner wrote "FKF" on the handle. It was engraved. I am sad because I can't erase it.
An isomorphic SS FISKARS model was reported by gerleatherberman before.
/post/1887382
/post/2003730 -
UPO 5 / 20
P-5 Pliers Black model with FileOh... The can opener and the large flat-head screwdriver are broken. :'(
P-5 pliers are very similar to P-4. They are same shape except the pivot bushing.
I made the <u>chart</u>, attentioning when they changed the alternate component (utility blade/file).
I thought that they changed the utility blade to the file while they were making P-5 pliers models.
So looking the chart, it seemed that they repealed the pivot bushing once (since P-3 pliers), then they suddenly and temporary revival it.SteveC reported P-5 pliers black model with the utility blade before.
/post/2091084But about the utility blade / file, it seems not to be a simple story.
I will mention it after. -
Hello hiraboo, very nice BO Multi-Plier

I only have one BO model, which looks like the same model as yours:


I am fortunate that the tools are still OK :D


I am not the original owner, but I expect that the tools are all original.

-
Max Stone
I was pretty surprised more than you expected. ( ̄□ ̄;)!!
Wow quite same situation, same angle !Whenever I got a new unknown model of Mr. Pinchy, I always wondered if it was modified by previous owner. I am very happy you have the same model. It is evidence this model was sold as it was.
And now I can confirm the can opener of this model have the flat craw.
Thank you very much ! ヾ(☆´3`)ノシUPO 6 / 20
Reconditioned ModelThis model was based on V5.
There may be other models based on other version."Reconditioned" was printed on the serrated blade side.
V5 models usually have the M-4 type patent marking. But this model have M-2.
This is clearly an irregular model. So I will not put it in the next chart.
I picked up this image from ebay. It is probably not NIB. May I call it RIB ?
-
Thank you for all the work Hiraboo.
I wasn't really aware of the Fisker branded versions. I do have a "Carolina Knife and Tool" version of the Multiplier somewhere, but that is made to a very different (lower) quality than the Gerbers. -
Gareth
Thank you for information about Carolona Knife & Tool.
Wow you have very unique tool ! ;)
In this thread, gerleatherberman reported these tools before.
/post/1948957Also there are some threads about these tools.
・Carolina Knife and Tool find.
/topic/23946・What...? Carolina Knife and Tool - Gerber looking Multi-tool
/topic/48441I posted this note in other thread. About relation between Gerber, Carolina Knife & Tool, and Blackie collins. Please right click to download.
Today I am so tired.
I will introduce UPO tomorrow. -
UPO 7 / 20
P-3 and P-4 mixed pliersI have seen some mixed models, such as M-3 patent marking on one handle and M-4 on the other. Or one handle has double lined font "GERBER", the other has single lined.
Now I find P-3 and P-4 mixed pliers. Wow...All P-3 pliers models have M-2 patent marking, instead early P-4 have M-3 so far.
This model has M-3 patent marking.
So it is certain that this model stands by the double border (P-3 to P-4 pliers / M-2 to M-3 marking).All P-3 and early P-4 pliers models have the utility blade instead of the file.
But this model has the file. I think it is slightly early event in timeline. A mysterious point. -
A very good looking Multi-Plier hiraboo

I think it is normal to see overlap between tool and design changes, maybe up to a year or longer, as they use up production stock and phase in changes.
It is a shame that there are no date codes to help put a timeline to each change, but with all the examples you are finding, and the progression (order) of each change mapped, it may be possible to create a master reference table based on your excellent diagrams, to help show what combination of tools and features are possible? -
Max Stone
Thank you for your thought-provoking opinions.

I was very encouraged.Please go out with a little play. (o≧▽゚)o
I think, so far, there are these subtypes of each component.-
Surface finish 3types.
-
Pliers 10types.
-
Nail nick position 2types x 2handles.
-
Handle cut-out 2types x 2handles.
-
Lanyard 3types.
-
Alternate component 3types.
-
Patent marking 4types.
-
Font of GERBER 2types x 2handles.
-
Can opener craw 2types.
-
Joining method 3types.
-
Scale 2types.
The number of combinations is the product of all of these.
There are some combinations that are not possible in practice, but let's simply calculate.3 x 10 x 2 x 2 x 2 x 2 x 3 x 3 x 4 x 2 x 2 x 2 x 3 x 2
= 829,440In calculation, there may be 829,440 models ! Σ(ОД○*).
I regret having calculated. (ノ゚ο゚)ノUPO 8 / 20
P-3 Pliers and M-3 Patent MarkingThis is P-3 pliers. The pliers of this model has rough surface.
I have other P-3 models that have more smooth surface.
It may be possible that pliers can be subdivided to more detailed versions. But I will not consider it this time...
Maybe someday.I wrote "All P-3 pliers models have M-2 patent marking..." in previous post yesterday.
But I find the unusual model that has P-3 pliers and M-3 patent marking.
That's one small step for man, one giant leap for Pinchology. -
-
Hello hiraboo, that is a lot of combinations!
I was thinking a table like this?
Still incomplete, but you can add each feature that is found for each Plier type.
With this table, you will be able to see how each feature develops and maps to each Plier type.
I will PM you to send the spreadsheet (too large to attach here) that you are welcome to use. It does have your excellent pictures


-
Max Stone
I can't believe you create this amazing chart in such a short amount of time.

Thank you for your hard work, spending time to do that.
I am very impressed this "International cooperation project".But I apologize to you that I should have explained more.
I also created my chart <u>before</u>. And my explanation about "Unidentified Pinchy Objects" was dependent on this↓ chart.
Pinchology rev5
Please right click to download.The reason for "Unidentified" is they are not included in this chart.
Without this chart and explanation, I think my post didn't make sense to many members. I am sorry.
Now I am preparing to revision my 5th edition chart to 6th, including them.
The easy-to-understand table you made was very helpful.
Thank you very much !This is 5th edition chart PDF version same as above.
↓ -
This chart is excellent hiraboo

And it shows how the Multi-Plier developed over time, with the different features and design elements.
-
Max Stone
( ´ω` )
UPO 9 / 20
P-3 pliers FISKARSAre you tired of FISKARS ?
Rest assured. This is the last FISKARS model I will introduce in UPO series.The P-3 pliers model is earliest FISKARS model I own.
M-2 patent marking is same as normal P-3 GERBER models.
But as I mentioned before, normal P-3 GERBER models don't have the file. -
UPO 10 / 20
Black P-2 Pliers M-2 Patent MarkingUPO 11 / 20
Black P-2 Pliers M-2 and M-2L Patent Marking Mixed
Upper: M-2 and M-2L mixed model
Lower: M-2 patent marking on the both handlesThese two models have quite same component except the patent marking.
The mixed model has M-2L patent marking on the serrated blade side.Gap between handles: Extreme pinchy !
The mixed model is similar to what scrounger previously reported.
/post/2177026Upper: M-2L patent marking
Lower: M-2 patent markingThe font of M-2L seems to be the same size as M-1.
So it is possible that M-2L was earlier than M-2.I described the shape of these lanyard ring as "Thin, grinded". Please let me know if you have a more accurate expression.
The grinded lanyard ring sticks out a little when folded inside the handle.
-
Nice to see more of your collection hiraboo

I think your description of the lanyard types is OK. It will be difficult to offer a more detailed description without pictures. Having the comparison pictures is always the best to make a selection, unless you are already an expert


-
Max Stone
Thank you for your confirmation. I feel relief. ( ˆoˆ )/
Even in Japanese, it is difficult for me to explain the shape of a component.
And I am worried that I may inadvertently use nasty slang, even though I am explaining it seriously. (;´д`)
Just like "May I cut the cheese ?" =3UPO 12 / 20
M-2L on Both HandlesThis model is V2.1.
In the last post, I mentioned M-2L patent marking(larger font) seemed earlier than M-2(smaller font). The number of models with M-2L seems to be less than M-2. I saw a model with M-2L patent marking on both handles for the first time.
But, ah... When I got it, one slide unlock button was gone.
-
UPO 13 / 20
Break TimeWhen I saw it at first, I thought it must be a new discovery.
Oh yeah I got an unknown model with a cable cutter !But it is not a cable cutter.
Somebody processed the original pliers.Apparently the original pliers is the P-4 type.
If someone needs a tool like this, something like a nippers, it is easier to buy a nippers than to make it.
So I thik someone cut the broken pliers.If it is a prototype, I am very happy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login