Swisstool Spirit X (with clip)
-
Fine review and mod mate

Let us know how the clip holds up please

-
-
Looks good sir!

Does the adhesive bond well? Any concerns that it might come un-stuck accidentally?
-
-
-
-
Very cool Silentio
Keep us updated on how it holds up mate 
-
-
A little about the adhesive--it's strong. I mentioned I had to remove it once, and getting that done requires you to pry it off. Even then, it wasn't easy. Once you stretch the tape though, the material loses its stickiness. It's almost impossible to stretch the tape while the clip is on though, so I reckon I'm pretty safe.
Clipdraw has an image on its site showing a dumb bell weight hanging on its clip to demonstrate strength. I'm not inclined to try that out, but as far as I'm concerned, the strength of the steel clip itself is the weakest link in this setup. Of course, I've only carried it for 2 days, will report back if I find any signs of weakness. I could have some bias, because if there's one American company I admire more than Leatherman for quality products, it's 3M.
BTW, borrowed a nice camera for a little while, so here's another pic. I couldn't help using my new Spirit X as a test model
Forgive the griminess, I forgot to wipe it down before shooting 

-
-
That's cool!
Yeah, 3M is a great company! I buy 3M products as much as possible!
-
Bandage on the index finger eh. By chance were you bitten by a serrated butter knife?

-
The Spirit X doesn't have the peanut butter blade!
-
I stand corrected!

-
@J-sews said:
Bandage on the index finger eh. By chance were you bitten by a serrated butter knife?
I sliced through my nail when peeling potatoes. The tape (made by 3M, incidentally) is there to make sure it doesn't lift and leave my index finger nail-less.
BTW, has anyone found it hard to pull out a tool on the Spirit? I have weak nails I think, find it tough to pull the scissors sometimes.
-
The tool's are more difficult to get out compared to other MT's, but that's because there under spring tension

There is a knack to getting them out, usually hooking you little finger under the tool you need (as long as it's not the blade :D) will work

-
@Mike, Lord of the Spammers! said:
The tool's are more difficult to get out compared to other MT's, but that's because there under spring tension
There is a knack to getting them out, usually hooking you little finger under the tool you need (as long as it's not the blade :D) will work

That's what I generally do.
-
Man, what's with you people and your weak sissy nails?

I actually have to bathe or soak my nails in hot water before I can cut them with anything. Yeah, they're tough. ::)
EDIT: By the way, thanks for doing this. Was gonna do the same myself but decided to hold off until someone slapped one on before me.
-
@One Lame Frog said:
Man, what's with you people and your weak sissy nails?
I actually have to bathe or soak my nails in hot water before I can cut them with anything. Yeah, they're tough. ::)
EDIT: By the way, thanks for doing this. Was gonna do the same myself but decided to hold off until someone slapped one on before me.
Haha, I fully concede that I have "sissy" nails. I have trouble with the awl on SAKs even sometimes. Let me know how your own clipdraw application turns out.
Thanks, Mike, for the tip on opening.
-
No probs

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login