Daredevil Challenge 2021
-
I'm getting excited about the challenge in just one week.

To try to like my S557 more, I added a mini-screwdriver to the corkscrew and burned a hole in the scale for a straight pin. I also made sure the inline Phillips fits my hex bit adapter. I'm not going into the challenge completely hobbled. ;)
Just trying to improve an unloved tool before the fun begins.

-
@ReamerPunch said:
I have one of those!
/topic/85067
I ended up giving it a lukewarm review. It has some nice things going for it, but too many negatives. If it was available for $15 it would be appealing, for $20 it would be ok, but I got it for $37, which is quite a lot for what it is.Still, I would love to see this in a challenge. We've seen Gerber MPs before. We have not seen many offbrand tools, especially those that were released in recent years. This challenge and the SAK-alike Challenge will hopefully showcase some lesser known tools.
Even if the DareDevil Challenge kinda focuses on the bad ones. >:DGood points, to be honest, I have given these two a fair amount of thoughts, the Wetol is forbiddingly heavy, I probably would never carry it(if not in this challenge) and let it sit around at home. Other than that, it actually is an okay tool. Sure, some of the design elements are not comparable to Victorinox/Leatherman, but for a 22 bucks tool(what I paid for), it is actually decent/passable.
MP600 is actually another story. It weights just a little more than a Spirit(which is one of the lightest weight MT), so I could very well carry this. But it has all the elements I dislike in MT, loose tolerance(worse than Wetol), stuck pliers, inconvenient tool access, combo edge, tool with no nail nick/lever, etc. I paid more than twice the price of Wetol for the MP600, and probably wouldn't have gotten the tool if not for collection purpose.
Anyhow, I am thinking maybe I should give Wetol a spin, since I am planning to do a Gerber challenge next year and I could "make peace" with either my MP600/MP400 there.

@SteveP said:
I'm getting excited about the challenge in just one week.
To try to like my S557 more, I added a mini-screwdriver to the corkscrew and burned a hole in the scale for a straight pin. I also made sure the inline Phillips fits my hex bit adapter. I'm not going into the challenge completely hobbled. ;)
Just trying to improve an unloved tool before the fun begins.
I actually do like the Delemont/Wenger tools, and with these mods, I have a strong feeling you would actually like the tool by the end of this.

-
@comis said:
I actually do like the Delemont/Wenger tools, and with these mods, I have a strong feeling you would actually like the tool by the end of this.
I'll keep my fingers crossed, Comis.
Have you - or anyone else following along - found any use for the Wenger wrench? Other than some references to using it for bicycle repair (I don't ride), no one seems to have found any use for it. Being stuck in the middle of a 5-layer SAK with a short length makes it nearly impossible to get a grip on anything.
I'm actually thinking of pulling the SAK apart, pulling out the wrench, and replacing it with a Vic mag glass.
I'm also thinking of adding a wood saw. I'll end up with a Delemont Evolution Woodsman. :D
-
I must bow out. Work obligations have me tied up. Good luck all!
-
Oh man :'( we will miss you but it's understandable

Still gonna go with the Gerber Suspension NXT
:D -
I'm still planning to use my MP600. I have nothing against the Gerber design and I did an MP challenge with my early model MP. It's just that I have always preferred pocket carry and the needle nose pliers of the MP600 tears pockets to shreds so I will have to carry in a belt pouch. My original MP has blunt nose pliers and I pocket carried it for many years without a problem. I want to find out if the tool set in the MP600 is worth the aggravation of carrying it in a belt pouch. I already determined long ago that the Gerber belt pouches are not very well made and ride too high causing them to poke me when I sit. That could very well be my biggest issue with this tool.
-
-
@pipedreams said:
I must bow out. Work obligations have me tied up. Good luck all!Sorry to see you go, but one more day to change mind! :D
@Poncho65 said:
Oh man :'( we will miss you but it's understandable
Still gonna go with the Gerber Suspension NXT
:D@Alan K. said:
I'm still planning to use my MP600. I have nothing against the Gerber design and I did an MP challenge with my early model MP. It's just that I have always preferred pocket carry and the needle nose pliers of the MP600 tears pockets to shreds so I will have to carry in a belt pouch. My original MP has blunt nose pliers and I pocket carried it for many years without a problem. I want to find out if the tool set in the MP600 is worth the aggravation of carrying it in a belt pouch. I already determined long ago that the Gerber belt pouches are not very well made and ride too high causing them to poke me when I sit. That could very well be my biggest issue with this tool.Looks like we are going to have a few Gerber entries in this challenge...

@ReamerPunch said:
:ahhh
One more day! :ahhhI know! :ahhh :ahhh :ahhh
-
The cool thing about this challenge is that we'll see tools that have never been in a challenge, and that most likely will never be in one again. :D
We'll see some questionable designs, and see what they really have to offer. Sure, it might get tough, tricky, and scary, but hey, gotta break some eggs, right?
We'll also see or even carry tools we did not care for, and maybe realize that they are not so bad after all.
This should be interesting.
-
@ReamerPunch said:
The cool thing about this challenge is that we'll see tools that have never been in a challenge, and that most likely will never be in one again. :D
We'll see some questionable designs, and see what they really have to offer. Sure, it might get tough, tricky, and scary, but hey, gotta break some eggs, right?
We'll also see or even carry tools we did not care for, and maybe realize that they are not so bad after all.
This should be interesting.
Indeed! Btw, I think I am going along with your suggestion...and am going in with a Wetol crazy-heavy MT! (What am I thinking!?) :ahhh
-

I am going with the Gerber Flik, which was also suggested over something else.
Maybe that could be a challenge. Each one could post a list of four tools, and others pick what everyone carries for a week. Kinda like the Poker Face Challenge.
-
@comis said:
I like Klein tools, but didn't know they have a multitool. That's going to be interesting.Have you seen their other multi-tool?

/topic/77520Spoiler:

- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
I'm going to stick with the OHT. I know it's LM and therefore "should" be good

The problem, IMO, is that I find the blades very short and it's too bulky (compared to my Surge)

I'm going to sneak it in to work (instead of my OG Surge) and see how it actually stands up operationally

The fact is I've had it since it was released here in the UK but I've never got on with it
Let's see how it pans out :-\
-
@ReamerPunch said:
Have you seen their other multi-tool?
/topic/77520
https://www.youtube.com/watch?v=9qNi_97asM0No, I haven't, but this just looks a passable OEM tool.
@SurgeUk said:
I'm going to stick with the OHT. I know it's LM and therefore "should" be good
The problem, IMO, is that I find the blades very short and it's too bulky (compared to my Surge)

I'm going to sneak it in to work (instead of my OG Surge) and see how it actually stands up operationally

The fact is I've had it since it was released here in the UK but I've never got on with it
Let's see how it pans out :-\
I think a lot of folks here are in the same shoe as you do. Often time it is not necessarily the tool that's bad, but either preconception/bias that prevent the tool being used and loved.
-
I am getting a head start on the challenge:

*The Toozall is an addition to my electrician's MT collection that came in yesterday at my place of work. *
I pulled the TripSaver out of storage last night and carried it with me today. I have used it some today. I already miss my Super Tool :'(

-
I have the feeling that this https://www.amazon.com/Swiss-Tech-Multitool-Multi-Tool-Screwdriver/dp/B08DHWHZFZ is going to feel a lot like this https://www.youtube.com/watch?v=5NbvmN5loJ8
Except that it's for a month.
-
You guys are nuts.

-
And proud of it. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login