Daredevil Challenge 2021
-
Oh man :'( we will miss you but it's understandable

Still gonna go with the Gerber Suspension NXT
:D -
I'm still planning to use my MP600. I have nothing against the Gerber design and I did an MP challenge with my early model MP. It's just that I have always preferred pocket carry and the needle nose pliers of the MP600 tears pockets to shreds so I will have to carry in a belt pouch. My original MP has blunt nose pliers and I pocket carried it for many years without a problem. I want to find out if the tool set in the MP600 is worth the aggravation of carrying it in a belt pouch. I already determined long ago that the Gerber belt pouches are not very well made and ride too high causing them to poke me when I sit. That could very well be my biggest issue with this tool.
-
-
@pipedreams said:
I must bow out. Work obligations have me tied up. Good luck all!Sorry to see you go, but one more day to change mind! :D
@Poncho65 said:
Oh man :'( we will miss you but it's understandable
Still gonna go with the Gerber Suspension NXT
:D@Alan K. said:
I'm still planning to use my MP600. I have nothing against the Gerber design and I did an MP challenge with my early model MP. It's just that I have always preferred pocket carry and the needle nose pliers of the MP600 tears pockets to shreds so I will have to carry in a belt pouch. My original MP has blunt nose pliers and I pocket carried it for many years without a problem. I want to find out if the tool set in the MP600 is worth the aggravation of carrying it in a belt pouch. I already determined long ago that the Gerber belt pouches are not very well made and ride too high causing them to poke me when I sit. That could very well be my biggest issue with this tool.Looks like we are going to have a few Gerber entries in this challenge...

@ReamerPunch said:
:ahhh
One more day! :ahhhI know! :ahhh :ahhh :ahhh
-
The cool thing about this challenge is that we'll see tools that have never been in a challenge, and that most likely will never be in one again. :D
We'll see some questionable designs, and see what they really have to offer. Sure, it might get tough, tricky, and scary, but hey, gotta break some eggs, right?
We'll also see or even carry tools we did not care for, and maybe realize that they are not so bad after all.
This should be interesting.
-
@ReamerPunch said:
The cool thing about this challenge is that we'll see tools that have never been in a challenge, and that most likely will never be in one again. :D
We'll see some questionable designs, and see what they really have to offer. Sure, it might get tough, tricky, and scary, but hey, gotta break some eggs, right?
We'll also see or even carry tools we did not care for, and maybe realize that they are not so bad after all.
This should be interesting.
Indeed! Btw, I think I am going along with your suggestion...and am going in with a Wetol crazy-heavy MT! (What am I thinking!?) :ahhh
-

I am going with the Gerber Flik, which was also suggested over something else.
Maybe that could be a challenge. Each one could post a list of four tools, and others pick what everyone carries for a week. Kinda like the Poker Face Challenge.
-
@comis said:
I like Klein tools, but didn't know they have a multitool. That's going to be interesting.Have you seen their other multi-tool?

/topic/77520Spoiler:

- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
I'm going to stick with the OHT. I know it's LM and therefore "should" be good

The problem, IMO, is that I find the blades very short and it's too bulky (compared to my Surge)

I'm going to sneak it in to work (instead of my OG Surge) and see how it actually stands up operationally

The fact is I've had it since it was released here in the UK but I've never got on with it
Let's see how it pans out :-\
-
@ReamerPunch said:
Have you seen their other multi-tool?
/topic/77520
https://www.youtube.com/watch?v=9qNi_97asM0No, I haven't, but this just looks a passable OEM tool.
@SurgeUk said:
I'm going to stick with the OHT. I know it's LM and therefore "should" be good
The problem, IMO, is that I find the blades very short and it's too bulky (compared to my Surge)

I'm going to sneak it in to work (instead of my OG Surge) and see how it actually stands up operationally

The fact is I've had it since it was released here in the UK but I've never got on with it
Let's see how it pans out :-\
I think a lot of folks here are in the same shoe as you do. Often time it is not necessarily the tool that's bad, but either preconception/bias that prevent the tool being used and loved.
-
I am getting a head start on the challenge:

*The Toozall is an addition to my electrician's MT collection that came in yesterday at my place of work. *
I pulled the TripSaver out of storage last night and carried it with me today. I have used it some today. I already miss my Super Tool :'(

-
I have the feeling that this https://www.amazon.com/Swiss-Tech-Multitool-Multi-Tool-Screwdriver/dp/B08DHWHZFZ is going to feel a lot like this https://www.youtube.com/watch?v=5NbvmN5loJ8
Except that it's for a month.
-
You guys are nuts.

-
And proud of it. :D
-
@Fireman said:
I have the feeling that this https://www.amazon.com/Swiss-Tech-Multitool-Multi-Tool-Screwdriver/dp/B08DHWHZFZ is going to feel a lot like this https://www.youtube.com/watch?v=5NbvmN5loJ8Except that it's for a month.
Good song!
Have you seen this review? - https://youtu.be/WFU9Wuq_5TQ
-
Here is a review of the TripSaver: /post/2267446
Perhaps I will grow to like it more after using it for a month.
-
@Adam5 said:
Here is a review of the TripSaver: /post/2267446Perhaps I will grow to like it more after using it for a month.
I've owned a few variations of that tools (plain needlenose, CAT branded blunt nose, and Malaysian National Police with strap cutter and tanto blade) and I view it as a nice design, just poorly executed with poor materials and workmanship. The interesting thing is that the Malaysian Police tool was never done as intended. The contract was cancelled AFTER Utica produced the entire run, and they've ended up in various places. My four Multimasters were sold together as a lot for like $20; as factory overruns. I feel that if the finish were upped, the blades actually sharp (which I don't mind, but that belt cutter is a PITA to even try to sharpen) and the pliers made from something other than steel "with a hardness in the hard cheeses category" it would be a good tool. It's pretty much the oldest multiool design still in production in its basic form. It's built like a tank, and you can't kill them. I am going to try to find a 1980s or 1990s made example, and hopefully, it will be better made.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
