Daredevil Challenge 2021
-
I am marinating a couple of pork tenderloins this morning and decided to use a non-alcoholic Heiniken as the liquid. I pulled out the TripSaver to open the bottle and then remembered that for the TripSaver the can/bottle opener is replaced by an awl. No problem.
I grabbed the bottle with my left hand by the neck. I stuck the plier head tips under the bottle cap and, using my left index finger as a fulcrum, pried the bottle cap off. A trick that I am sure many if not all of you know. I had no worries about the plier tips. The plier head is quite robustly built.

-
@Humayd A R Mahomedy said:
Day 1
20210801_105053 by Humayd a r Mahomedy, on Flickri'm going with a Swisstool for this challlenge,i got it used,from a friend who got it used,in June 2019.
i don't hate the tool,nor do i dislike it,it just isn't a good fit for me.
it is very well made,and this particular tool looks to have had some cosmetic work done on the pliers and handles.the file also has a notch cut into it.
i find some of the tools difficult to access,and the edges of the handles were uncomfortable in use,even though i hit them with a de-burring wheel on the buffer.
i do like the tool enough to want more,especially the X model.
some of my hesitance is probably due to the tool being pre,pre,pre-owned.
let's see how i find this tool after 30 days

I was not expecting to see a SwissTool in this. :D
-

This Wetols I got from Amazon cost me $22, and considering the lower cost, it is actually relatively well made. But it is a real pant dragger(which I really do hate), and I sworn I need to hold onto my pants whenever I need to take a leak. Crazy heavy, a whopping 336g (11.8oz), it looks beefy right next to a Spirit X.

I kinda like this. I'd rather be using that than the Flik. :ahhh -
Day 01
The Gerber MP-600. I've never liked it because the tools are short for a full size tool and it is uncomfortable for me to carry it. Here the sliding pliers are seen withdrawn and deployed. -
@ReamerPunch said:
I was not expecting to see a SwissTool in this. :D:D
what can i say :D -
-
-

This Wetols I got from Amazon cost me $22, and considering the lower cost, it is actually relatively well made. But it is a real pant dragger(which I really do hate), and I sworn I need to hold onto my pants whenever I need to take a leak. Crazy heavy, a whopping 336g (11.8oz), it looks beefy right next to a Spirit X.
That's a good sized tool you have there Comis
(I'll just leave that one hanging...
) -
@Adam5 said:
I am marinating a couple of pork tenderloins this morning and decided to use a non-alcoholic Heiniken as the liquid. I pulled out the TripSaver to open the bottle and then remembered that for the TripSaver the can/bottle opener is replaced by an awl. No problem.I grabbed the bottle with my left hand by the neck. I stuck the plier head tips under the bottle cap and, using my left index finger as a fulcrum, pried the bottle cap off. A trick that I am sure many if not all of you know. I had no worries about the plier tips. The plier head is quite robustly built.

"Necessity is the mother of invention" Adam

-
@Alan K. said:
Day 01
The Gerber MP-600. I've never liked it because the tools are short for a full size tool and it is uncomfortable for me to carry it. Here the sliding pliers are seen withdrawn and deployed.I fully agree with this point of view (same issue for me with the OHT)
I have a work issued MP600 but was lucky enough to be part of a trial for the OG Surge & never looked back :D
Best of luck

-
@Humayd A R Mahomedy said:
:D
what can i say :DI'm in the same position as you mate (using a LM OHT)
The general consensus is that it's a jolly, damned fine, splendid tool
Fact is, it's NEVER worked well for me. I hope to be won over

Best of British to you

-
@comis said:
So as long the mods does not alter the original too much, I think it is acceptable. But I would suggest to refrain from doing further mods to the tool until the end of the challenge.
Fair enough, comis.
The length of the list of potential mods at the end of 30 days will be a good indication of my acceptance of the S557. ;)
-
<u>Day 1</u>
So my first offering for the Daredevil challenge is, quite frankly, not very daring ::)
However, for me it's a rare useage shot
Changing the bulb in the O/S light (the OHT helped ;) )
-
So my first offering for the Daredevil challenge is, quite frankly, not very daring ::)
However, for me it's a rare useage shot
Changing the bulb in the O/S light (the OHT helped ;) )Just barely long enough to get in there and too short for complete rotation. Will an extension driver fit the OHT?
-
Great start out of the gate :ahhh

-
@SurgeUk said:
I'm in the same position as you mate (using a LM OHT)
The general consensus is that it's a jolly, damned fine, splendid tool
Fact is, it's NEVER worked well for me. I hope to be won over

Best of British to you

why thank you kind Sir.
i also have an OHT,but it's not very practical for me.
i might run it if there ever is an OHT challenge :D -
Day 1 of 30
Well, I have never been a fan of the Gerber Suspension ::) so when the NXT came out it looked better so I bought one of them :D It has a combo blade and I also dislike those
I am glad this started on a Sunday so I can get use to it a bit more before an actual work day :ahhh I do really like the clip on it anyways 
Let the month of hopefully not misery begin



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




