Daredevil Challenge 2021
-
I was at Lowe's today. I went in there for a bifold door hardware kit, a new pair of linesman's pliers, and a new electrical outlet to replace one that tended to not hold plugs tightly anymore. WHile in the electrical stuff, I bought a new electrical meter. Battery had to be installed, but was included. Haven't heard of a 23A before. It's about 2/3 the size of a AAA, but about the same diameter. And, 12 volts! I normally go with analog meters, and I decided to try a digital one, despite being $10 more (while I can't do continuity as easy with one of these, it is easier to read). Because of the smaller size, it doesn't use a 9V like most of my other meters.

Part of the reason I rarely ever carry this Swiza is that the backside Phillips is smaller than that on a Victorinox (or even Wenger/Delemont). However, a lot of battery covers are #1. I have usually been carrying my Bond as my main pliers-based tool, and if I need a bit that is Torx or hex (most of what's in the kit as I have the removable adapter card laid out), I use the removable bit adapter. I don't keep the #1/#2 bit in the card anymore; as I had to make room for a more speciality bit from the larger bit kit. That helps make it a good multitool companion.

23A is kinda common for wireless door chime, but I agree, it was an oddity when I first saw it. I haven't used my Swiza for the longest time, but did vaguely remember the tolerance of the tools kind resembled Wenger/Delemont. How was your copy?
@Adam5 said:
You will deserve whatever badges you receive after using that thing for 30 days Echo

-
@SteveP said:
Thanks, Adam. I'm glad I'm not the only one.Later in the afternoon, the Wenger scissors failed cutting through a piece of very thin elastic cord and through a plastic bag. I couldn't even slice along the length of the plastic bag because of the serrations.
So scissors that don't cut - fail!
The S557 very slightly redeemed itself at dinner by successfully opening a beer bottle.
But 4 scissor uses and 4 failures.

-
@Adam5 said:
Yes, the NXT's Phillips driver is much better than the Suspension's 2D Phillips.As for SAKs, I won't carry one without an inline Phillips. Just too handy.
And my hex bit coupler fits on it well too.
(Some older Wengers had official 2D Phillips blades. I've never used one, but seems no more than a glorified nail cleaner.)
-
-
Day 4
If I'm gonna be stuck with the Flik for a month, I might as well try and improve it.
The Flik's bottle opener has a little bit of a belly. I decided to grind it straight with a Dremel. Maybe a minute's work.
Now, with both flatheads opened, they can accommodate the square hole bit adapter. It fits very well on there. No complaints. Now I can extend the reach, use standard bits, and it is much stronger than the dedicated Phillips the Flik has. Quite pleased with this. Now the Flik will have to commandeer the Rebar's sheath and bit set.

-
@SurgeUk said:
It is a rather "unique" tool but, that said, different is good
It was given to me by a mate knowing I like MT's Surge, very kind but
so had just got chucked in a box.
This challenge seemed like the perfect time to give it a go. I really like the hammer as it goes, yes exactly, something a bit different....but as comis said in an earlier post, also a bit of a heavy tool to base an MT around and still make carryable
@SteveP said:
I would have been really impressed if you'd used the hammer claw to open the package.

It's Hammer Time!
watch this space...maybe

@Adam5 said:
You will deserve whatever badges you receive after using that thing for 30 days Echo
Thanks Adam
...to think what lovely tools i could be using
:ahhh ah well that's what challenges are for -
@comis said:
Vic scissors is the best, especially for precision cut. I think Wenger's 'shear' is meant for more robust stuff, but it's not too shabby if the medium is just paper. One way I used to test a scissors is to have it cut cling wrap, if it could cut it with ease, it's a good one.I just did the Official Comis Cling Wrap Test and here are the results:
- Vic scissors: No problem cutting or slicing through the cling wrap.
- Serrated Wenger-design scissors: Could cut the wrap only if using the ends of the scissor blades. Slicing motion failed.
So that makes 5 scissor fails in one day.


-
@ReamerPunch said:
Day 4If I'm gonna be stuck with the Flik for a month, I might as well try and improve it.
The Flik's bottle opener has a little bit of a belly. I decided to grind it straight with a Dremel. Maybe a minute's work.
Now, with both flatheads opened, they can accommodate the square hole bit adapter. It fits very well on there. No complaints. Now I can extend the reach, use standard bits, and it is much stronger than the dedicated Phillips the Flik has. Quite pleased with this. Now the Flik will have to commandeer the Rebar's sheath and bit set.

That looks like the exact same bit set and hex bit coupler I got with a Winchester multi tool and that fits very nicely on the inline Phillips of SAKs.
If anyone wants one, I found the bit sets with coupler for less than $3 on AliExpress.com.
-
@comis said:
Oh, wait, I think my magnetic sheath may work, if it doesn't imprint too much...(pls don't click if you are not ready to see grown man belly dance)
:D- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
You are so good at creating nice usable things.
-
Day 3
20210803_191233 by Humayd a r Mahomedy, on Flickr
glamor shot,no real use today :-[ -
Day 3
The Minimaster helped liberate a treat and toy for Fisher. I should have known better than to walk from the mailbox to grocery store, it takes me past the pet store.It also helped cut out some cooking directions on frozen food boxes, so I could throw out the boxes and create more room in freezer.

-
Daredevil Day 4: A post of SurgeUk's made me think about trying tea again, so today's first task is slicing through the wrapper.
I tried taking the Swiss+Tech apart to smooth it up but I need another bit to get it completely apart. I went as far as I could with the bits I have, and it turns out that's a really bad idea.
Got it back together and working like it was. I might leave it as is and work on it after the challenge.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





