Daredevil Challenge 2021
-
<u>Day 4</u>


Wetols attended coffee duty this morning, the drip coffee bag is made of soft fabric and slicing the top clean off is no easy task.
The tool was banging on my knee and car door yesterday, so I start carrying it in a nurse organizer within the cargo pants pocket. Wedged in a pocket behind a Field Notes, so far so good.

-
-
@Fireman said:
Daredevil Day 4: A post of SurgeUk's made me think about trying tea again, so today's first task is slicing through the wrapper.I tried taking the Swiss+Tech apart to smooth it up but I need another bit to get it completely apart. I went as far as I could with the bits I have, and it turns out that's a really bad idea.
Got it back together and working like it was. I might leave it as is and work on it after the challenge.
Excellent choice
Now all you need are the obligatory chocolate Hobnobs -
@ReamerPunch said:
Day 4If I'm gonna be stuck with the Flik for a month, I might as well try and improve it.
The Flik's bottle opener has a little bit of a belly. I decided to grind it straight with a Dremel. Maybe a minute's work.
Now, with both flatheads opened, they can accommodate the square hole bit adapter. It fits very well on there. No complaints. Now I can extend the reach, use standard bits, and it is much stronger than the dedicated Phillips the Flik has. Quite pleased with this. Now the Flik will have to commandeer the Rebar's sheath and bit set.


-
@ReamerPunch said:
I was waiting for this use!

Brilliant

-
<u>DAY 4</u>
The OHT was spirited into work on the QT where it assisted with deniable ops (repairing a battery pack)


-
Day 4
IMG-20210804-WA0017 by Humayd a r Mahomedy, on Flickra friend asked me to help him out with his RCBS Uniflow powder measure.
it was in storage and seized due to corrosion.
the large driver/pry was perfect for the slot head screws -
@Humayd A R Mahomedy said:
Day 4
IMG-20210804-WA0017 by Humayd a r Mahomedy, on Flickra friend asked me to help him out with his RCBS Uniflow powder measure.
it was in storage and seized due to corrosion.
the large driver/pry was perfect for the slot head screwsExcellent use there

-
Lots of excellent Day 4 content


-
Day 4 of 30
Scissors :ahhh Well they cut but when using them for more than a couple of cuts or in something a bit thicker than regular paper they aren't the most comfortable :ahhh but they do cut
:D

The unlock tabs still suck though

-

Mine doesn't have a saw or a file (well not a good one anyways
) 
-
-
-
Day 04
I used the partially serrated knife blade to open a bag of Cypress mulch. Knife blade is not very sharp so it ripped the bag open more than sliced it. I will have to give it a touchup. -
The OHT was spirited into work on the QT where it assisted with deniable ops (repairing a battery pack)

@Humayd A R Mahomedy said:
Day 4
IMG-20210804-WA0017 by Humayd a r Mahomedy, on Flickra friend asked me to help him out with his RCBS Uniflow powder measure.
it was in storage and seized due to corrosion.
the large driver/pry was perfect for the slot head screwsGood uses!

@Alan K. said:
Day 04
I used the partially serrated knife blade to open a bag of Cypress mulch. Knife blade is not very sharp so it ripped the bag open more than sliced it. I will have to give it a touchup.Do you think it has more to do with the serration than being dull? I recently watched a youtube vid from Felix testing serration vs non-serrated Vic blade, turns out they perform quite evenly(much to my surprise). But still, plain edge is that much easier to maintian.
-
**Day 4
**
The S557 did a better job with lunch today.The scissors cut through a grape vine fine, so they seem to be OK with firmer things.
And the knife blade had no problem slicing a tomato.

-
-
Created a hook on the end of a steel wire to help grab a wire in the ceiling that was out of my reach:

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
actually worked quite well in a rip it open kinda way 



