Daredevil Challenge 2021
-
Day 4, some of the finds I opened up today.
A lot of these are castings that lasted in some form up through about 2000 or so.
Matchbox had a Bomag roller, Atlas Excavator, and Faun heavy dump truck. But, by the late 1980s, they'd lost their licensed badging and became generic. These three castings were introduced when MBX was still being made in England, and were shuffled around. The Atlas was recently modified, and was still being used as recently as a couple of years ago. Faun lost its metal bed in favor of a plastic one about 2008, and then the pivoting bed was replaced with a fixed plastic water tank a few years ago. The Bomag was retired in the early 2000s. This Bomag is made in England, so it's an early one.
HW released some very nicely done Caterpillar models in the early 1980s (along with a Grove crane and Oshkosh P-15 ARFF airport fire truck) that are miles ahead of Matchbox. I think mine is one of the first releases, as the CAT badge and "777B" the model number is cast in, which got removed in all subsequent releases. It's also all metal, while the MBX Faun had a plastic chassis--its' metal on the HW.
The D-10N has rubber treads and friction sleeve hydraulic cylinders. Beats the heck out of MBX's D9 they had at the time. Ironically, after Mattel bought MBX, some of these HW castings (including the 777B) were released as Matchbox in about 1999-2000 or so.
I had a CAT branded Tinker Small that was period correct to these CATs; but I gave it away to a friend of mine who operated CAT equipment for more than 30 years in the coal mining industry. I am guessing a dealer had ordered these, as I haven't seen another. The CAT logo was inlaid, and was the old style "CATERPILLAR" logo before the simple "CAT" with the triangle became common.

-
Day 5
Used the can opener’s “sharp” edge, (sharp in inverted commas as it’s quite blunt), to open package with an old slide lock Hunter in it. Will have to try to open an actual can before the month’s out.
Quite like the little serrated edge on the tool but not sure what you’d use it for, cutting cord maybeThe Hunter isn’t in bad nick apart from the scales and was fairly cheap, like a slide lock and fancied a Hunter, might replace the scales if I can get the Hunter specific ones but no biggie. Needs a really good clean though

-
Day 5
The Minimaster’s tweezers helped with refilling dog poop bags

-
-
Used the can opener’s “sharp” edge, (sharp in inverted commas as it’s quite blunt), to open package with an old slide lock Hunter in it. Will have to try to open an actual can before the month’s out.
Quite like the little serrated edge on the tool but not sure what you’d use it for, cutting cord maybeThe Hunter isn’t in bad nick apart from the scales and was fairly cheap, like a slide lock and fancied a Hunter, might replace the scales if I can get the Hunter specific ones but no biggie. Needs a really good clean though

That is an odd shaped tool indeed
;) -
@cody6268 said:
Day 4, some of the finds I opened up today.A lot of these are castings that lasted in some form up through about 2000 or so.
Matchbox had a Bomag roller, Atlas Excavator, and Faun heavy dump truck. But, by the late 1980s, they'd lost their licensed badging and became generic. These three castings were introduced when MBX was still being made in England, and were shuffled around. The Atlas was recently modified, and was still being used as recently as a couple of years ago. Faun lost its metal bed in favor of a plastic one about 2008, and then the pivoting bed was replaced with a fixed plastic water tank a few years ago. The Bomag was retired in the early 2000s. This Bomag is made in England, so it's an early one.
HW released some very nicely done Caterpillar models in the early 1980s (along with a Grove crane and Oshkosh P-15 ARFF airport fire truck) that are miles ahead of Matchbox. I think mine is one of the first releases, as the CAT badge and "777B" the model number is cast in, which got removed in all subsequent releases. It's also all metal, while the MBX Faun had a plastic chassis--its' metal on the HW.
The D-10N has rubber treads and friction sleeve hydraulic cylinders. Beats the heck out of MBX's D9 they had at the time. Ironically, after Mattel bought MBX, some of these HW castings (including the 777B) were released as Matchbox in about 1999-2000 or so.
I had a CAT branded Tinker Small that was period correct to these CATs; but I gave it away to a friend of mine who operated CAT equipment for more than 30 years in the coal mining industry. I am guessing a dealer had ordered these, as I haven't seen another. The CAT logo was inlaid, and was the old style "CATERPILLAR" logo before the simple "CAT" with the triangle became common.

That's a lot of plant there 
-
@ReamerPunch said:
Day 5
Gotta love some Jelly Beans

-
-
-
@Alan K. said:
Day 04
I used the partially serrated knife blade to open a bag of Cypress mulch. Knife blade is not very sharp so it ripped the bag open more than sliced it. I will have to give it a touchup.
The blade on my one isn't so bad but, then again, I rarely use it ::) -
<u>DAY 5</u>
Used the OHT to open a new pack of calibration traps (not much else doing ::) )

-
Great Day 5 already

-
Day 5 of 30
Tried out the combo blade today ::) If you know me you know I dislike combo blades
:DIt will sharpen a pencil but not as easily as a PE blade would have ;)

Couple glamor shots of the tool and a close up of the combo blade




-
<u>Day 5</u>



Wetols attended chilli cooking duty today, it did alright for the cutting job(handle is not the most comfortable to hold tight to), but fail miserably at opening the can. The lip of the can is too tall for the opener to punctuate, and I end up have to resort to my trusted SAK for the job. The chilli was tasty nonetheless, and that's all that really matter. :D
-
@ReamerPunch said:
Day 5
Your sweets photo have reminded me that I have been eating a fair amount of ice-cream this summer, and I might need to get fit soon again.
@Adam5 said:
Created a hook on the end of a steel wire to help grab a wire in the ceiling that was out of my reach:
Great use!
Used the can opener’s “sharp” edge, (sharp in inverted commas as it’s quite blunt), to open package with an old slide lock Hunter in it. Will have to try to open an actual can before the month’s out.
Quite like the little serrated edge on the tool but not sure what you’d use it for, cutting cord maybeThe Hunter isn’t in bad nick apart from the scales and was fairly cheap, like a slide lock and fancied a Hunter, might replace the scales if I can get the Hunter specific ones but no biggie. Needs a really good clean though

Since it is the Hunter model, I looked it up on Sakwiki and it seems to be used for 'gutting'. But I would agree for non-hunting use, probably cutting fabric would be well within its capability.
-
@cody6268 said:
Day 4, some of the finds I opened up today.A lot of these are castings that lasted in some form up through about 2000 or so.
Matchbox had a Bomag roller, Atlas Excavator, and Faun heavy dump truck. But, by the late 1980s, they'd lost their licensed badging and became generic. These three castings were introduced when MBX was still being made in England, and were shuffled around. The Atlas was recently modified, and was still being used as recently as a couple of years ago. Faun lost its metal bed in favor of a plastic one about 2008, and then the pivoting bed was replaced with a fixed plastic water tank a few years ago. The Bomag was retired in the early 2000s. This Bomag is made in England, so it's an early one.
HW released some very nicely done Caterpillar models in the early 1980s (along with a Grove crane and Oshkosh P-15 ARFF airport fire truck) that are miles ahead of Matchbox. I think mine is one of the first releases, as the CAT badge and "777B" the model number is cast in, which got removed in all subsequent releases. It's also all metal, while the MBX Faun had a plastic chassis--its' metal on the HW.
The D-10N has rubber treads and friction sleeve hydraulic cylinders. Beats the heck out of MBX's D9 they had at the time. Ironically, after Mattel bought MBX, some of these HW castings (including the 777B) were released as Matchbox in about 1999-2000 or so.
I had a CAT branded Tinker Small that was period correct to these CATs; but I gave it away to a friend of mine who operated CAT equipment for more than 30 years in the coal mining industry. I am guessing a dealer had ordered these, as I haven't seen another. The CAT logo was inlaid, and was the old style "CATERPILLAR" logo before the simple "CAT" with the triangle became common.

That's a cool collection. Since my little guy in house has taken a keen interest in anything that moves, I did have a decent Tomica collection ongoing now. Surprisingly, the brand even made a lot of animal or mini figures, and even cartoon cars from Disney movie Cars as well.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



with Fireman I thought refilling those was Fisher's job 