Daredevil Challenge 2021
-
Used the can opener’s “sharp” edge, (sharp in inverted commas as it’s quite blunt), to open package with an old slide lock Hunter in it. Will have to try to open an actual can before the month’s out.
Quite like the little serrated edge on the tool but not sure what you’d use it for, cutting cord maybeThe Hunter isn’t in bad nick apart from the scales and was fairly cheap, like a slide lock and fancied a Hunter, might replace the scales if I can get the Hunter specific ones but no biggie. Needs a really good clean though

That is an odd shaped tool indeed
;) -
@cody6268 said:
Day 4, some of the finds I opened up today.A lot of these are castings that lasted in some form up through about 2000 or so.
Matchbox had a Bomag roller, Atlas Excavator, and Faun heavy dump truck. But, by the late 1980s, they'd lost their licensed badging and became generic. These three castings were introduced when MBX was still being made in England, and were shuffled around. The Atlas was recently modified, and was still being used as recently as a couple of years ago. Faun lost its metal bed in favor of a plastic one about 2008, and then the pivoting bed was replaced with a fixed plastic water tank a few years ago. The Bomag was retired in the early 2000s. This Bomag is made in England, so it's an early one.
HW released some very nicely done Caterpillar models in the early 1980s (along with a Grove crane and Oshkosh P-15 ARFF airport fire truck) that are miles ahead of Matchbox. I think mine is one of the first releases, as the CAT badge and "777B" the model number is cast in, which got removed in all subsequent releases. It's also all metal, while the MBX Faun had a plastic chassis--its' metal on the HW.
The D-10N has rubber treads and friction sleeve hydraulic cylinders. Beats the heck out of MBX's D9 they had at the time. Ironically, after Mattel bought MBX, some of these HW castings (including the 777B) were released as Matchbox in about 1999-2000 or so.
I had a CAT branded Tinker Small that was period correct to these CATs; but I gave it away to a friend of mine who operated CAT equipment for more than 30 years in the coal mining industry. I am guessing a dealer had ordered these, as I haven't seen another. The CAT logo was inlaid, and was the old style "CATERPILLAR" logo before the simple "CAT" with the triangle became common.

That's a lot of plant there 
-
@ReamerPunch said:
Day 5
Gotta love some Jelly Beans

-
-
-
@Alan K. said:
Day 04
I used the partially serrated knife blade to open a bag of Cypress mulch. Knife blade is not very sharp so it ripped the bag open more than sliced it. I will have to give it a touchup.
The blade on my one isn't so bad but, then again, I rarely use it ::) -
<u>DAY 5</u>
Used the OHT to open a new pack of calibration traps (not much else doing ::) )

-
Great Day 5 already

-
Day 5 of 30
Tried out the combo blade today ::) If you know me you know I dislike combo blades
:DIt will sharpen a pencil but not as easily as a PE blade would have ;)

Couple glamor shots of the tool and a close up of the combo blade




-
<u>Day 5</u>



Wetols attended chilli cooking duty today, it did alright for the cutting job(handle is not the most comfortable to hold tight to), but fail miserably at opening the can. The lip of the can is too tall for the opener to punctuate, and I end up have to resort to my trusted SAK for the job. The chilli was tasty nonetheless, and that's all that really matter. :D
-
@ReamerPunch said:
Day 5
Your sweets photo have reminded me that I have been eating a fair amount of ice-cream this summer, and I might need to get fit soon again.
@Adam5 said:
Created a hook on the end of a steel wire to help grab a wire in the ceiling that was out of my reach:
Great use!
Used the can opener’s “sharp” edge, (sharp in inverted commas as it’s quite blunt), to open package with an old slide lock Hunter in it. Will have to try to open an actual can before the month’s out.
Quite like the little serrated edge on the tool but not sure what you’d use it for, cutting cord maybeThe Hunter isn’t in bad nick apart from the scales and was fairly cheap, like a slide lock and fancied a Hunter, might replace the scales if I can get the Hunter specific ones but no biggie. Needs a really good clean though

Since it is the Hunter model, I looked it up on Sakwiki and it seems to be used for 'gutting'. But I would agree for non-hunting use, probably cutting fabric would be well within its capability.
-
@cody6268 said:
Day 4, some of the finds I opened up today.A lot of these are castings that lasted in some form up through about 2000 or so.
Matchbox had a Bomag roller, Atlas Excavator, and Faun heavy dump truck. But, by the late 1980s, they'd lost their licensed badging and became generic. These three castings were introduced when MBX was still being made in England, and were shuffled around. The Atlas was recently modified, and was still being used as recently as a couple of years ago. Faun lost its metal bed in favor of a plastic one about 2008, and then the pivoting bed was replaced with a fixed plastic water tank a few years ago. The Bomag was retired in the early 2000s. This Bomag is made in England, so it's an early one.
HW released some very nicely done Caterpillar models in the early 1980s (along with a Grove crane and Oshkosh P-15 ARFF airport fire truck) that are miles ahead of Matchbox. I think mine is one of the first releases, as the CAT badge and "777B" the model number is cast in, which got removed in all subsequent releases. It's also all metal, while the MBX Faun had a plastic chassis--its' metal on the HW.
The D-10N has rubber treads and friction sleeve hydraulic cylinders. Beats the heck out of MBX's D9 they had at the time. Ironically, after Mattel bought MBX, some of these HW castings (including the 777B) were released as Matchbox in about 1999-2000 or so.
I had a CAT branded Tinker Small that was period correct to these CATs; but I gave it away to a friend of mine who operated CAT equipment for more than 30 years in the coal mining industry. I am guessing a dealer had ordered these, as I haven't seen another. The CAT logo was inlaid, and was the old style "CATERPILLAR" logo before the simple "CAT" with the triangle became common.

That's a cool collection. Since my little guy in house has taken a keen interest in anything that moves, I did have a decent Tomica collection ongoing now. Surprisingly, the brand even made a lot of animal or mini figures, and even cartoon cars from Disney movie Cars as well.
-
Used the OHT to open a new pack of calibration traps (not much else doing ::) )
From this angle, the OHT seems to have a funky blade shape? Kinda like a prolonged tanto tip?

Tried out the combo blade today ::) If you know me you know I dislike combo blades
:DIt will sharpen a pencil but not as easily as a PE blade would have ;)

Couple glamor shots of the tool and a close up of the combo blade




I am still waiting for the a-ha moment to really adopt serrated blade over plain edge for me. I remembered when I first started the 'knife hobby', I brought into the whole "serrated blade could cut even when dull" urban myth, and collected a few of them. But ever since I found out SE is such a pita to sharpen and how easy it is with PE, I never looked back. :D
-
@Alan K. said:
It reminds of the multi-purpose tool on the Aitor pocket knives.
You mean this one?
I think the thickness of the tool is too thick for it to be viewed as a 'blade' but more like a saw, but then the saw tooth is so wide apart and few in between, I bet it may be difficult to saw anything with it easily. I have this tool somewhere, and ought to give that a try sometime after this challenge... -
It could probably cut rope. SAK alike challenge is coming up. I reckon that Aitor would be a good candidate.

-
Wetols attended chilli cooking duty today, it did alright for the cutting job(handle is not the most comfortable to hold tight to), but fail miserably at opening the can. The lip of the can is too tall for the opener to punctuate, and I end up have to resort to my trusted SAK for the job.
I had to dig into my can opener thread for this. I remember it performing adequately.

Here's my post of it. It did alright. Not that comfortable, and not perfectly consistent tracing along the rim, but it was fine.Spoiler:
@ReamerPunch said:
Bibury 21 in 1

A locking quarter-circle, properly positioned to hook on the rim.
Initial piercing was extremely easy. Comfort took a small hit, due to some sharp edges, but nothing we have not seen even with premium multi-tools.
The Phillips screwdriver tip acted as a stop, preventing the can opener from sinking in too deep in the lid. As the cutting edge made a cut, the screwdriver tip will meet the lid, signifying that the cutting edge has ran out and it is time to advance to the next cut. This unintentional feature lends itself to cutting consistently, every cut being equal in length.While tracing around the lid is easy, sometimes the rim will bend and you will not be able to continue on a previous cut. It was necessary to pierce ahead and then connect the two cuts. Nothing time consuming or difficult, just an extra little step to get the can opened, if you happen to bend the rim.
The lid was not pushed in the can, and it did not create any shrapnel. Some sharp points were left behind, but otherwise a quick, easy job, with some minor discomfort, no slipping and no jamming. Not a bad choice at all, which is refreshing to see in a budget multi-tool that went with the quarter-circle.

2 points for punching through.
1 for comfort.
2 for not jamming.
1 for cutting.
2 for not slipping.
Total: 8 -
Day 05
I said yesterday that the combo edge blade needed a touchup and I did something I never do. I used the carbide blade eaters on my SOG keychain tool. Normally I would use my Spyderco Sharpmaker with ceramic rods or I would use Arkansas wet stones and I would really take my time and give it my attention, but the Gerber MP600 just has an industrial look and feel that makes me think it is made to be abused and eventually replaced, so who cares if you touch up the blade with a carbide pull through sharpener. Anyway, it is sharp now. I will use a diamond coated sharpening rod to get the serrated portion later. -
@comis said:
From this angle, the OHT seems to have a funky blade shape? Kinda like a prolonged tanto tip?
I bought it over the counter on my high street so I doubt it has anything other than the standard blade

I got it just after it was released in the UK (2015 ish?) Did they ever change them

Here's another recent shot of it for your perusal (maybe it's just the angle of dangle
)
-
@SurgeUk said:
with Fireman I thought refilling those was Fisher's job 
I thought the same thing, but just decided to leave it. Although I will say, if I (or having Fisher) ever get to the point of “refilling” bags in that sense, I am in a desperate place. I know “single-use” isn’t popular nowadays but some things really should only be used once.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
