Daredevil Challenge 2021
-
<u>DAY 9</u>
Morning all. Great shots so far

I have to go in to London unexpectedly (old school friend in town
) so I can't carry the OHT 
Here it is lounging around in the garden this morning. As you can probably see summer is in full swing here ::)

-
@Echotech said:
So many great back stories, I’m already getting withdrawal symptoms! Good on Tokyo (a city I love) for going ahead and cheering the world up a bit during this rotten time. Really feel for them not being able to attend or really get involved, Sydney in 2000 was fantastic like that…or be able to offset the cost with tourismNow all we need is Doug Marcaida and an edged weapon based contest for all us blade nuts

That'd be interesting, in fact, I always think there maybe some potential in 'blade sport', and as tech advances, we probably will be seeing something more outlandish in the future(super high skydive from space? video gaming? drone obstacle course flying?)
I like Tokyo as a city myself, and did hear some stories from the participating teams in terms of the arrangement this year. I think one of the unexpected side effect is the massive sponsorship drops out, and this probably why some of the process/ceremonies are less than stellar. I do feel sorry for the city, but kudos to those whom keep this up at last minute and it practically is mission impossible achieved.
@Sos24 said:
I wouldn’t trust them for anything heavy duty, but it will work for tightening some loose nuts. The key is to use finger/thumb on side so all the torque isn’t through the hinge.Along those lines, I think Kutmaster missed an opportunity in not having one of the driver holes be 1/4in to use as bit driver.
That make perfect sense, and would surely make it more adaptable to common bits. In fact, I do love to see how 1/4 in driver hole on MT or 'harduse' knives.
-
@Humayd A R Mahomedy said:
i prefer FS on a multitool where there is a PE blade,so that's a best of both worlds situation.
i'll use a PS blade,if that's all i have,but also depends on the scenario,eg,a camping bushcraft exercise,but i'll still take multiple knives/tools to cover all the bases,unless i'm taking the minimalist approach [which i don't do :D]Same here, I think as knife/tool enthusiast, part of the fun for any outing is to give our beloved tools a test.
@ReamerPunch said:

I nicked my brand new Dime's scale trying to open that ridiculously thick plastic with the Flik's PE blade.
This is why I can't have nice things. And why I love the Rebar package opener.I thought about this often, and do think I have a pretty optimized way to open any clam shell with slip joints or knives, probably should make a video about that sometime soon.
-
Morning all. Great shots so far

I have to go in to London unexpectedly (old school friend in town
) so I can't carry the OHT 
Here it is lounging around in the garden this morning. As you can probably see summer is in full swing here ::)
what is "Summer" in England? :D
just kidding mate,we [people from Durban,RSA] are always ribbed about our winters,probably balmy by your standards at lows of 7 deg C this year.
cool picDay 9
20210809_092421 by Humayd a r Mahomedy, on Flickr
i used the knife blade to get to a pack of smokes
20210809_144815 by Humayd a r Mahomedy, on Flickr
and i used the medium driver to get to a buddy's magazine spring base plate [the "externa" base plate/shoe broke] -
Daredevil Day 9: The file has no cutting edge, but it does have a diamond file on one side. One of my Spartans was dull as could be, so I gave it about ten passes in each direction on the file, and it is sharp.

-
Day 9 looking great, all 8)

-

The TripSaver's serrated blade is sharp and was able to cut through this nylon-reinforced flexible plastic conduit without trouble.
I also tried using the saw blade this morning.

It is completely outclassed by saw blades that can cut in both push and pull directions. -
@Fireman said:
Daredevil Day 9: The file has no cutting edge, but it does have a diamond file on one side. One of my Spartans was dull as could be, so I gave it about ten passes in each direction on the file, and it is sharp.
Wow, the spartan must be really dull to get a sharp edge from a diamond file.
@Humayd A R Mahomedy said:
what is "Summer" in England? :D
just kidding mate,we [people from Durban,RSA] are always ribbed about our winters,probably balmy by your standards at lows of 7 deg C this year.
cool picDay 9
20210809_092421 by Humayd a r Mahomedy, on Flickr
i used the knife blade to get to a pack of smokes
20210809_144815 by Humayd a r Mahomedy, on Flickr
and i used the medium driver to get to a buddy's magazine spring base plate [the "externa" base plate/shoe broke]The TripSaver's serrated blade is sharp and was able to cut through this nylon-reinforced flexible plastic conduit without trouble.
I also tried using the saw blade this morning.

It is completely outclassed by saw blades that can cut in both push and pull directions.Nice uses! That serrated blade looks legit.
-
<u>Day 9</u>

Really light use today, the Wetols cut open a few food packets for hotpot.
-
Great pic, comis

-
Day 9 of 30
The pliers didn't quite help with this one
I still haven't used the pliers really yet ;) I still need to try the cutters out though 



-
That's a big nut--I know this is probably a dumb thought
, but just quite curious if the handles can pinch that nut and turn it opened by two hands? 
-
Day 9
The Minimaster helped open some packages. A few of which were more pieces to my niece’s and nephew’s care package.

It also helped to change the blade on my spool tool for paracord.

-
-
Day 09
-
Day 9;
Had to change the car's license plate from a WV temporary tag (issued by dealer) to a VA permanent. Could not find the "Big Screwdriver" that mostly sees use as a prybar; so I was stuck with the Swiza and my Tough Tool. The Swiza got it off alright, but I used the Tough Tool (USA original) to finish the job. The thick tip of the old "Perfect Handle" Korean War-era Irwin I have would've been MUCH easier. I didn't have my keys to get into the farm shop (where most of the tools are; and I had the thick tip of my Proto J-100 which is my only current keychain OPT), and no big screwdriver was to be found in the garage. Both of these were too thin (though the extra width of the screwdriver and the fat handle of the Schrade made it easier) for the job. Highly polished tools don't rust as much, but when it comes to screwdriving work, their constant slipping and sliding are annoying. Part of the reason these days, I mostly carry the Leatherman Bond or Rebar; and their matte bead blasted drivers.

On another note, the dealer didn't supply a front plate mount back in May (which should've been standard equipment with the car in my mind; given they're right across the VA/WV state line; and are owned by a businessman here in my county), and despite having ordered it on the 2nd, they still haven't gotten it in. So, looks like we're running with one plate. Can't just zip tie the plate to the front or buy a "one fits all" plate holder from the auto parts store; as due to the !@$% sensors, the proper front plate mount snaps in a specific hole, and does not screw on. You have to buy Ford's.
-
Day 10

-
@Sos24 said:
Day 9
The Minimaster helped open some packages. A few of which were more pieces to my niece’s and nephew’s care package.

It also helped to change the blade on my spool tool for paracord.

The care package gets better and better, moleskine/usb/Vic Classics/ID holder+purse, that's just plain awesomeness.
@Poncho65 said:
They wouldn't open any farther ;)Hope that the niece and nephew enjoy the care packages


Oh, that's what I meant, but that's just me trying to think outside the box, may not be good to the tool but I am trying to think what-if I must to get that loosen with no other options in hand.Had to change the car's license plate from a WV temporary tag (issued by dealer) to a VA permanent. Could not find the "Big Screwdriver" that mostly sees use as a prybar; so I was stuck with the Swiza and my Tough Tool. The Swiza got it off alright, but I used the Tough Tool (USA original) to finish the job. The thick tip of the old "Perfect Handle" Korean War-era Irwin I have would've been MUCH easier. I didn't have my keys to get into the farm shop (where most of the tools are; and I had the thick tip of my Proto J-100 which is my only current keychain OPT), and no big screwdriver was to be found in the garage. Both of these were too thin (though the extra width of the screwdriver and the fat handle of the Schrade made it easier) for the job. Highly polished tools don't rust as much, but when it comes to screwdriving work, their constant slipping and sliding are annoying. Part of the reason these days, I mostly carry the Leatherman Bond or Rebar; and their matte bead blasted drivers.

On another note, the dealer didn't supply a front plate mount back in May (which should've been standard equipment with the car in my mind; given they're right across the VA/WV state line; and are owned by a businessman here in my county), and despite having ordered it on the 2nd, they still haven't gotten it in. So, looks like we're running with one plate. Can't just zip tie the plate to the front or buy a "one fits all" plate holder from the auto parts store; as due to the !@$% sensors, the proper front plate mount snaps in a specific hole, and does not screw on. You have to buy Ford's.
Hmmm, now that you mentioned it, it does make good sense about the bead-blasted vs polished drivers. I did remember the polished driver would slip from time to time, but never notice it enough to compare it to bean-blasted.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
