Daredevil Challenge 2021
-
@comis said:
Do post it on MTO, always find any xray for any knives pretty informative, especially with non-removable handle fixed-blade(like Mora Garberg)
Almost spill my coffee. :DEven with that, I have to keep referencing back and forth with the SAKwiki, I only can remember the most popular models by heart.
At the end of the day, whatever keep her happy is the most important.

"Do post it on MTO, always find any xray for any knives pretty informative, especially with non-removable handle fixed-blade(like Mora Garberg)"
I can't get away with fixed blades as we're only issued MT's (mostly Gerber) & Lock Knives (not good ones either) :'(
I can substitute my MT & Lock Knife but, unless it's one I have already, people would need to send me the item etc

Also the smaller ones (Micra/Squirt & SAKS etc) would be a non-starter as they would NEVER be official issue

I'll see what I can do after this challenge with what I have and see where it goes (remind me
) -

Didn't have any use today, friends brought their kids to visit and the adults are playing some Texas Hold'em for fun. Quite a few are seasonal poker player, but I was lucky to have many good hands and being unpredictable.

Did you stack the cards in favour of the Wetols or did you just keep chipping away at them

-
@Alan K. said:
Day 14
Today I removed the child safety cap from a pill bottle. It feels as though the knife blade is in the wrong handle because this configuration prevents you from working close on the handle end of the blade because the lower handle of the tool gets in the way. A contrast to better thought out tool configurations such as the Vic Spirit and Leatherman Wave.
Another reason I've never got on with my (actual) "Official Issue" Pro Scout 
-
@Fireman said:
Daredevil Day 14:Did I really say this?
Yes, and it's proof that when you carry one tool without comparing it to others, your evaluation may be off. Compared to nothing, the Swiss+Tech knife will cut things, such as the packaging for the new headlight bulbs for my wife's car. It didn't cut the plastic easily, and I didn't want to damage the pricey bulbs, so I grabbed my RangerGrip 78 off the desk. The SAK blade cut the same plastic effortlessly. I'll just call it a reminder that cheap tools are made of cheap materials, and the Swiss+Tech won't be taking the place of my SAKs.

Buy cheap buy twice (or buy the bulbs twice
) Good decision 
-
@Adam5 said:
Week 2?!
NOOOOOOOOO!

Week 3! We have already
suffered throughenduredmanaged through nearly 2 weeks of this challenge. Except for Echotech and his wonderous Hammerhead, I don't think any of us at this time have decided that our challenge MT is the tool for us. Don't make the end farther away than it has to be!
It really has not been that bad for me, and I think everbody else feels the same way. But I don't know if anybody will change their mind enough to actually carry their tool much after the challenge.
+1I'm still not convinced that the OHT is growing on me (or likely to do so)

It's not a bad tool, far from it. It's just too fiddly and the blades, in particular, are too short/small for my needs.
Also it needs scissors and the plier lock is too easily activated whilst being carried (see fiddly)

Just my mid-challenge observations

-
@Adam5 said:
Week 2?!
NOOOOOOOOO!

Week 3! We have already
suffered throughenduredmanaged through nearly 2 weeks of this challenge. Except for Echotech and his wonderous Hammerhead, I don't think any of us at this time have decided that our challenge MT is the tool for us. Don't make the end farther away than it has to be!
It really has not been that bad for me, and I think everbody else feels the same way. But I don't know if anybody will change their mind enough to actually carry their tool much after the challenge.
Ah yes, I do stand corrected
:DToday is the end of week 2 ;)

I still am not crazy about the NXT either

-
Day 14 of 30
Marking 2 weeks of the challenge so far
;) :DI used the NXT to adjust on a cabinet door and the file/ruler/med flat driver worked just fine


and just a regular pic as well today


-
-
Day 14
Easily cut the tip off a tube of adhesive for a home repair project.
Later, used the pliers to remove chiseled splinters from a door jamb on which I had to move the strike plate. I think this is the first time I've used the pliers during the challenge! And yes, this is a different project from the adhesive one. ;)
Other than the surprisingly bad scissors, the tools on the S557 have functioned fine. Still haven't found a use for the universal wrench, so that's a chunk of metal just taking up space that could be used by something more useful.


-
<u>DAY 14</u>
Not much actual use today (mostly H/R stuff ::) )
The OHT helped with pizza preparation for lunch tomorrow
I only used it for opening the packaging (as it's been used at work)
Here's the before & after shots (background artwork by previous child visitors :D )
Don't tell Mrs Surge that I bought a pizza with pepperoni



-
cool pics all round

Day 14
20210814_211408 by Humayd a r Mahomedy, on Flickr
i find the phillips driver a little tricky to access -
@Humayd A R Mahomedy said:
cool pics all round
Day 14
20210814_211408 by Humayd a r Mahomedy, on Flickr
i find the phillips driver a little tricky to access
Same with mine 
-
-
Day 14
Not much use for the Minimaster today, except opening a snack

-
Hammerhead not used yet, but did hammer the chilies
…fresh cayenne and birds eye chili, hot chili and sweet chili sauce, chili powder and chili flakes as well as Thai green curry paste, curry powder, turmeric, ground coriander, cumin, basil and coriander paste.
Lots of veggies and chicken, lime juice, garlic, fish and soy sauce, finished with coconut milk

I want to eat with you!
-
@Echotech said:
I am enjoying the hammerhead but unfortunately it’s not really pocketable, has definitely been a bit of a surprise package thoughIf I was going somewhere without a full tool kit and thought I’d need a hammer then it’d be coming along. The saw works surprisingly well and the knife since being sharpened isn’t too bad, wouldn’t be winning any awards but for opening boxes and the like no problem. The drivers are fine too, but a bit awkward with the hammerhead, although I suppose it would give you leverage


@comis said:
I am slightly surprised too to see few of us have taken interest in this tool, does change my concept on this kind of tool a little bit.What I find "wonderous" about Echotech's MT is that it has been useable for him. I have to admit that I have a bias against hammer MTs, and I probably still do for the MTs that have the hammer head double as a plier head. I won't purposely go buy a MT like Echotech's, but if I ever find one in my hand then I will know that I might be able to accomplish something with it.
-
Easily cut the tip off a tube of adhesive for a home repair project.
Later, used the pliers to remove chiseled splinters from a door jamb on which I had to move the strike plate. I think this is the first time I've used the pliers during the challenge! And yes, this is a different project from the adhesive one. ;)
Other than the surprisingly bad scissors, the tools on the S557 have functioned fine. Still haven't found a use for the universal wrench, so that's a chunk of metal just taking up space that could be used by something more useful.
Nice usage Steve!
I carried a Gerber Suspension for several years and never made any use of its scissors. I never thought I had a need for scissors. But recently I discovered that MT and SAK scissors can be very good and useful, and now I can't imagine not having any with me.
-
Marking 2 weeks of the challenge so far
;) :DI used the NXT to adjust on a cabinet door and the file/ruler/med flat driver worked just fine


and just a regular pic as well today


It is very important to have the right tool for the job. Who would have thunk that the right tool was the NXT?

:D
-
Day 14

No usage today. Stayed inside with the grandkids to avoid the heat.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
