Daredevil Challenge 2021
-
@Fireman said:
Daredevil Day 14:Did I really say this?
Yes, and it's proof that when you carry one tool without comparing it to others, your evaluation may be off. Compared to nothing, the Swiss+Tech knife will cut things, such as the packaging for the new headlight bulbs for my wife's car. It didn't cut the plastic easily, and I didn't want to damage the pricey bulbs, so I grabbed my RangerGrip 78 off the desk. The SAK blade cut the same plastic effortlessly. I'll just call it a reminder that cheap tools are made of cheap materials, and the Swiss+Tech won't be taking the place of my SAKs.

Buy cheap buy twice (or buy the bulbs twice
) Good decision 
-
@Adam5 said:
Week 2?!
NOOOOOOOOO!

Week 3! We have already
suffered throughenduredmanaged through nearly 2 weeks of this challenge. Except for Echotech and his wonderous Hammerhead, I don't think any of us at this time have decided that our challenge MT is the tool for us. Don't make the end farther away than it has to be!
It really has not been that bad for me, and I think everbody else feels the same way. But I don't know if anybody will change their mind enough to actually carry their tool much after the challenge.
+1I'm still not convinced that the OHT is growing on me (or likely to do so)

It's not a bad tool, far from it. It's just too fiddly and the blades, in particular, are too short/small for my needs.
Also it needs scissors and the plier lock is too easily activated whilst being carried (see fiddly)

Just my mid-challenge observations

-
@Adam5 said:
Week 2?!
NOOOOOOOOO!

Week 3! We have already
suffered throughenduredmanaged through nearly 2 weeks of this challenge. Except for Echotech and his wonderous Hammerhead, I don't think any of us at this time have decided that our challenge MT is the tool for us. Don't make the end farther away than it has to be!
It really has not been that bad for me, and I think everbody else feels the same way. But I don't know if anybody will change their mind enough to actually carry their tool much after the challenge.
Ah yes, I do stand corrected
:DToday is the end of week 2 ;)

I still am not crazy about the NXT either

-
Day 14 of 30
Marking 2 weeks of the challenge so far
;) :DI used the NXT to adjust on a cabinet door and the file/ruler/med flat driver worked just fine


and just a regular pic as well today


-
-
Day 14
Easily cut the tip off a tube of adhesive for a home repair project.
Later, used the pliers to remove chiseled splinters from a door jamb on which I had to move the strike plate. I think this is the first time I've used the pliers during the challenge! And yes, this is a different project from the adhesive one. ;)
Other than the surprisingly bad scissors, the tools on the S557 have functioned fine. Still haven't found a use for the universal wrench, so that's a chunk of metal just taking up space that could be used by something more useful.


-
<u>DAY 14</u>
Not much actual use today (mostly H/R stuff ::) )
The OHT helped with pizza preparation for lunch tomorrow
I only used it for opening the packaging (as it's been used at work)
Here's the before & after shots (background artwork by previous child visitors :D )
Don't tell Mrs Surge that I bought a pizza with pepperoni



-
cool pics all round

Day 14
20210814_211408 by Humayd a r Mahomedy, on Flickr
i find the phillips driver a little tricky to access -
@Humayd A R Mahomedy said:
cool pics all round
Day 14
20210814_211408 by Humayd a r Mahomedy, on Flickr
i find the phillips driver a little tricky to access
Same with mine 
-
-
Day 14
Not much use for the Minimaster today, except opening a snack

-
Hammerhead not used yet, but did hammer the chilies
…fresh cayenne and birds eye chili, hot chili and sweet chili sauce, chili powder and chili flakes as well as Thai green curry paste, curry powder, turmeric, ground coriander, cumin, basil and coriander paste.
Lots of veggies and chicken, lime juice, garlic, fish and soy sauce, finished with coconut milk

I want to eat with you!
-
@Echotech said:
I am enjoying the hammerhead but unfortunately it’s not really pocketable, has definitely been a bit of a surprise package thoughIf I was going somewhere without a full tool kit and thought I’d need a hammer then it’d be coming along. The saw works surprisingly well and the knife since being sharpened isn’t too bad, wouldn’t be winning any awards but for opening boxes and the like no problem. The drivers are fine too, but a bit awkward with the hammerhead, although I suppose it would give you leverage


@comis said:
I am slightly surprised too to see few of us have taken interest in this tool, does change my concept on this kind of tool a little bit.What I find "wonderous" about Echotech's MT is that it has been useable for him. I have to admit that I have a bias against hammer MTs, and I probably still do for the MTs that have the hammer head double as a plier head. I won't purposely go buy a MT like Echotech's, but if I ever find one in my hand then I will know that I might be able to accomplish something with it.
-
Easily cut the tip off a tube of adhesive for a home repair project.
Later, used the pliers to remove chiseled splinters from a door jamb on which I had to move the strike plate. I think this is the first time I've used the pliers during the challenge! And yes, this is a different project from the adhesive one. ;)
Other than the surprisingly bad scissors, the tools on the S557 have functioned fine. Still haven't found a use for the universal wrench, so that's a chunk of metal just taking up space that could be used by something more useful.
Nice usage Steve!
I carried a Gerber Suspension for several years and never made any use of its scissors. I never thought I had a need for scissors. But recently I discovered that MT and SAK scissors can be very good and useful, and now I can't imagine not having any with me.
-
Marking 2 weeks of the challenge so far
;) :DI used the NXT to adjust on a cabinet door and the file/ruler/med flat driver worked just fine


and just a regular pic as well today


It is very important to have the right tool for the job. Who would have thunk that the right tool was the NXT?

:D
-
Day 14

No usage today. Stayed inside with the grandkids to avoid the heat.
-
Day 14.
The challenge marks about two weeks straight of carrying this knife. A different camera reveals the rubber, as expected, is wearing quite poorly. I can't stand rubber. However, I don't get how my cheap Moras are taking a beating, but their rubber handles don't really wear that fast.

My grandmother has an LG Stylo 5+, which despite being considerably cheaper (roughly $200 vs. $450) has a much nicer camera than mine, and before I show her how to use it, I have to learn how to use it myself. LG's camera interface is more like a traditional digital camera. The problem with my phone is that since it's usually a model sold to businesses, and under FirstNet to utilities, police, fire, and EMS/Rescue; they figure the camera is not a big deal. The LG camera is designed to work great in low-light, the Kyocera does not. It's awful in anything but bright sunlight or diecast models and knives right under and directly in front of my desk lamp I use in my diecast photo area,
I have the DuraForce Pro 2, which is a two-year-old model, but I bought mine new last year. Kyocera has now upgraded that one, to the DuraForce Ultra 5G, which has improvements across the board--in battery, RAM, storage, and especially camera (including a much better camera, 24MP vs. my 13MP). However, it is currently only available on Verizon, and I still have 4 years until this phone is due for replacement (2-3 for used/refurbished, 5 for new devices is how I typically go). And really, AT*T doesn't do trade-ins on this model.
In retrospect, given how much I take photos for here and other forums, I should've gone with a higher-end regular smartphone for the same $450 price, and invested in an Otterbox and screen protector. I understand some models from the bigger names in phones are making their regular models more impact and water-resistant. That being said, I need to start looking into a decent, affordable "point and shoot" type for my forum photos.
-
@Adam5 said:
Nice usage Steve!I carried a Gerber Suspension for several years and never made any use of its scissors. I never thought I had a need for scissors. But recently I discovered that MT and SAK scissors can be very good and useful, and now I can't imagine not having any with me.
The Victorinox-designed scissors are great. But stay away from the Wenger-designed serrated ones.
-
@comis said:
At the end of the day, whatever keep her happy is the most important.
@comis said:
Wow, looks awesome! Hammered chilies? Bet it's spicy, but good!

@comis said:
I am slightly surprised too to see few of us have taken interest in this tool, does change my concept on this kind of tool a little bit.@Adam5 said:
What I find "wonderous" about Echotech's MT is that it has been useable for him. I have to admit that I have a bias against hammer MTs, and I probably still do for the MTs that have the hammer head double as a plier head. I won't purposely go buy a MT like Echotech's, but if I ever find one in my hand then I will know that I might be able to accomplish something with it.I reckon if you see one for €6 like on that site you found Adam then it’s well worth the price, it definitely has some kind of cool factor going for it IMO, even just for a bit of fun

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

