Daredevil Challenge 2021
-

Used Wetols to liberate a few new knives and parts.
The new black micarta Case is pretty good, the satin finish on the blades hide any imperfections/blade rub quite well, and the overall fit and finish is decent. The Pocket worn is the 20th anniversary rendition, but the F&F is all over the place, gaps, poor rivets, play, proud spring when blades are opened...as if it is trying to reminds me the tango relationship with Case, one step forward, two steps back.
The flytanium Ti scales on PM2 fits like a glove. I always wanted to try them, and now I know what the rave is all about. It does turn the PM2 into something completely different, and I like it.
That's a lovely looking Spydie

-
Hi, all!
Just a very friendly reminder, as the challenge will be coming to an end in a few days, if any of our participants would like to receive a free magnet on this challenge, please do feel free to send me your shipping address via private message.

For most of us whom would have received a free magnet from another challenge in the past, I do have your address on file and it will be sent to you after it's made.


-
@Humayd A R Mahomedy said:
Day 26<a href="https://flic.kr/p/2mjoJmr" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51403959769_f36005d509.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20210826_082515 by Humayd a r Mahomedy, on Flickr
i've been planning on re-sharpening the chisel for some time,and today i finally put a descent edge on it,using a coarse lansky stone,then a medium Lansky stone.Gotta look after your tool

@Sos24 said:
Day 26
The Minimaster helped to breakdown some boxes. The small driver has a small and narrow enough end that it cuts through packing tape pretty well, saving the blade. Afterward, it did a nice job opening a beer

Opening a beer! What a fine task to undertake 
Not much use today. I did use the TripSaver to cut a piece of Romex electrical cable, which reminded me of how unsuited the pliers are for that task.

That's disappointing but, if it wasn't, it wouldn't be a challenge

-
-
I've been trying all month to find a use for the "Universal Wrench" on the Evolution S557. With the challenge end coming up soon, I decided to try a couple of random things:
-
Bolts holding the license plate to my car: Too big for the jaws of the Universal Wrench.
-
Hex-head screws holding my gutters together: Jaws fit on them, but with the wrench being in the middle of a 5-layer SAK, I couldn't get the Universal Wrench flush enough with the screw head to get any grip on it.
-
Some of the bolts holding the garage door track together: Too big for the Universal Wrench.
So, in summary, I don't know what universe the "Universal Wrench" is made for, but it isn't mine. Leaving it as a large useless piece of metal in the middle of the S557.
If any of you out there have positive experiences with the Wenger Universal Wrench, I'd love to hear about them. Somebody at Wenger must have thought it would be useful or Wenger wouldn't have added it to several SAKs and Victorinox wouldn't have kept it in the Delemont line.
Update on Day 25:
I did almost have an additional use last night...
I got a splinter in my finger and thought the tweezers and the pin would be perfect. But I needed the mag glass from my Deluxe Explorer (Explorer + pliers mod) to see the splinter, so ended up using its tweezers and pin instead. Now if only the S557 had a mag glass instead of the wrench...
It's really frustrating when you realise that little thought has gone into what could be a really useful tool

-
-
-
-
@Alan K. said:
Day 26
More yard work. It never ends.Not sure about your choice of museli there Alan

-
@Alan K. said:
Doctor advised more fiber.
Well I'm sure that you couldn't get more fibrous than that

-
<u>DAY 27</u>
Day off today and not much actual use ::)
Here's the OHT opening some Jalapeno/Cheese poppers (they were very bland)


-
Day 27
Here is a shot of the warnings printed on the side of the TripSaver:

I may have violated all three of these warnings this month

-
Day 27
The Minimaster helped open and set free a new tool, which may see some carrying time in next months SA-a-like challenge.

-
Day 27
-
Day 27: opened some stuff.
The Chevy is an old dealer promo that for a long time was very hard to find. They were made by a company called Authentic Scale Models out of Brooklyn who seems to have produced only the Chevy C-Series, as a dealer promo sometime prior to 1968 (thus, 1967?). A seller in CT recently listed several on the big auction site, and apparently his brother has been sitting on a large amount of them for years. I suspect that perhaps when GM noticed the poor quality, they canceled the contract with most of the models produced; and what this individual had was the entire leftover stock.
The Matchbox is a special run a member of the Wilton, CT Fire Department did for the department and another forum I am on. It was done by Color Comp. Matchbox used to have a close relationship with ColorComp and produced blank (usually white) models for their use, but this ended in the 2000s, and the blanks ran out by 2013-2014. Thus, the individual that had this run done had to source what Hazard Squad models he could find, remove the printing, and then send them off to ColorComp to be printed.
The gray truck is a Winross, a 1960 Autocar I believe. I already own two Winross, Ford L-Series for Dr. Pepper, and a Ford commemorative series. Too big with their trailers, so I put them away. The seller had several cab-only trucks, and I bid on most, mainly for a Ford L-Series that had an opening hood. Lost on all but this one.

-
@Echotech said:
It comes with its own sheath Steve, can be belt carried vertically or horizontallyFor 9 weeks, so since well before the challenge, I’ve been in lockdown.
Apart from a weekly trip to Coles (supermarket) I’ve only left the house to walk Coco, so haven’t actually carried it all :ahhh


Well, that is a surprisingly (disappointingly?) low-key sheath. ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D

