Leatherman Core mod
-
@kottskrapa said:
Really cool mod![It's not failure if you learn something from it]
Thanks!
-
This certainly merits an entry in this thread: /topic/74592
Thank you

I will post this mod there. -
Very nice mod!
-
Thank you kind sirs!

-

I love using the saw for cutting drywall, but I am going to have to find an alternative to using my Core. I really don't want to have to give it a thorough cleaning every time I cut into a ceiling.
I really don't want to carry an additional tool (my Nite Ize Pock-its look like chipmunks carrying an entire winter supply of food in their cheeks)

but I think I will need to remove the saw and drop it into a proper sized handle if I intend to keep using it for electrical work. -
Excellent mod Adam

-
Thanks!
-
Decided to install the Surge saw/file holder. Of course, that means having to fill in the pivot hole to match the Core's pivot. There are a few solutions that can be found in the forum. Here is my solution:
I cut a piece of 6 awg soft drawn copper wire and then used a hammer to deform the wire and force it to expand and fill the pivot hole:

Then I sanded the the copper to be almost flush with the holder. Then I drilled a 3/16" hole (4.8mm) and sanded the interior of the pivot hole so that the pivot screw would fit:

After some careful grinding, the holder fits inside the Core. I also changed out the Surge large bit holder I previously installed with a 1/4" bit holder so that I can used my 1/4" bits. I removed the Phillips driver, the large straight driver, the saw (to be used in another project), and the file. I added back the small straight driver. There are some electrical connectors that this driver can be used for.

-
I love it!
[It's not failure if you learn something from it]
-
Very nice 8) :o

-
Thanks guys!
I forgot to add that I added tweezers from a Classic SD to the MT last weekend:

I glued a piece of rubber inside the handle this morning to keep the tweezers from pivoting around:

-
Even better 8)

-
The zytel made it a bit more easy I guess

-
It certain did make easier.
-
I just wanted to say that the diamond file was mighty useful today. I had to sharpen a long flexible bit and the diamond file made quick work of the sharpening. Very glad I made that addition.
-
Diamond MT files are so much better than regular MT files, they work very well for lots of small and refined tasks 8)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login