The Hacked Leatherman Owners Club.
-
@breakfast said:
Hey there! Here's my mash-up of the supertool 300eod and 300m.Nice looking MT!
-
A Core that I am in the process of modding:


-
Thanks!

Here is the link to my thread in the mod forum:
/topic/88061 -
One of my dual color ST300s




-
Still getting on great with my Charge knife even after a couple years


-
I am a big fan of that knife

I can't carry my Multiforce knife for another 6+ weeks :(
-
That is why I am not in a challenge right now :ahhh :D
-
My newest Project. I call it the Style ES because I am not creative with names haha. I'm toying with the idea of making a specialty tool for working on the style and squirt series because tensioning the springs can be a massive pain. I don't know if I work on them often enough to justify that though. I'll upload a sketch of the tool in a bit.
Full size image: https://imgur.com/a/mFlfgtn
Oh, and FYI for anyone working on the riveted Squirt Series
A: They are a massive pain
B: One side of the rivet is tapered out so you have to really dig into the handle to get it out, but the outher side you just have to grind of a tiny bit for the rivet to slide thorugh. Looking at the pile of parts I have here, the side with the taper appears to be the side that has the writing on the handles.
Any questions let me know! I know I can not be the best at describing things sometimes.

-
Here is the tool. Basic idea is you screw the female end of the post onto one end of this 1/8" rod that is pointed on one end. If you have ever worked on the Style or Squirt series you know that you can see light at the other side when assembling the tool, but all of the tools are off center stopping you from inserting the pivot. This typically leads to a very stressful assembly of prying and putting the tool in a vice. Ever since I first put one of these together I have been racking my brain trying to figure out a tool and this is what I have come up with. So once the post is screwed to the tool, you can get the pointed end into the hole of the tools, then you just push forward to align everything. Once the post is pulled through, you just unscrew the tool and you are done. Maybe Loki would be interested in making this tool for sale, I'm still trying to figure out how to manufacture one myself. What do you folks use to put these tools back together?

-
Great mod and pics, Waco

-
@4.19.93Waco said:
Here is the tool. Basic idea is you screw the female end of the post onto one end of this 1/8" rod that is pointed on one end. If you have ever worked on the Style or Squirt series you know that you can see light at the other side when assembling the tool, but all of the tools are off center stopping you from inserting the pivot. This typically leads to a very stressful assembly of prying and putting the tool in a vice. Ever since I first put one of these together I have been racking my brain trying to figure out a tool and this is what I have come up with. So once the post is screwed to the tool, you can get the pointed end into the hole of the tools, then you just push forward to align everything. Once the post is pulled through, you just unscrew the tool and you are done. Maybe Loki would be interested in making this tool for sale, I'm still trying to figure out how to manufacture one myself. What do you folks use to put these tools back together?
I've only taken a Style PS apart once, and that was enough. However, I have envisioned a similar tool (a tapered rod that threads into the female pivot post) for reassembling Original Waves. Their plier-tensioning springs seem to be much stiffer than those on the post-2004 Wave, and aligning the plier head and handle pivot holes requires keeping that spring compressed while the parts are aligned--which requires three hands, preferably of superhuman strength. If I had a tapered rod that I could force through the holes while pulling the pivot in behind it, that would eliminate the need for a vise and lots of swearing.I tend to use a worn-out, tapered sharpening rod as a combination of punch and aligning tool for multitool disassembly and reassembly.
-
I currently use a worn out sharpenig rod as well, but as I often use BO tools in my mods one slip means an ugly scratch along the tool, which is not ideal. I suppose you could do a set of several of these rods
1/8' for Style
7/64" for Wave Plier pivot
3/16" for Wave Tools
And whatever the Wingman uses, as I know those are also a pain to put back together due to spring tension.I'm working on putting a mobile modding kit together for all of the "Lego" (drop in) mods you can do on a Leatherman tool. These would make a great addition, but I am not sure how expensive they would be to produce.
The kit currently has the following
- 2 IFixIt drivers with all of the torx bits needed to take apart a Leatherman (I have the 5 star bit but they are in 1/4" instead of 4mm, I think I will grind them down to 4mm)
- IFixIt case which doubles as a part tray
- Tweezers
- Small amount of rust preventative/lubricant called tuf glide. It goes on as a thin liquid but dries to a dry lubricant which doesn't collect dust
- Small butane lighter for breaking down loctite
I want to add at least the 1/8" tool to this, but I might add the others. If you think of any other tools to add to this, please let me know!
-
Any comprehensive Leatherman modding kit needs a set of Loki's wrenches for Leatherman's proprietary screws. They make disassembly of the PST/PSTII, Blast/Fuse/Kick, Rebar, Bond, etc. much easier and less damaging than grabbing those screw heads with pliers.
-
Ah yes, I do have those in it but I forgot to list them.
-
@4.19.93Waco said:
I currently use a worn out sharpenig rod as well, but as I often use BO tools in my mods one slip means an ugly scratch along the tool, which is not ideal. I suppose you could do a set of several of these rods1/8' for Style
7/64" for Wave Plier pivot
3/16" for Wave Tools
And whatever the Wingman uses, as I know those are also a pain to put back together due to spring tension.I'm working on putting a mobile modding kit together for all of the "Lego" (drop in) mods you can do on a Leatherman tool. These would make a great addition, but I am not sure how expensive they would be to produce.
The kit currently has the following
- 2 IFixIt drivers with all of the torx bits needed to take apart a Leatherman (I have the 5 star bit but they are in 1/4" instead of 4mm, I think I will grind them down to 4mm)
- IFixIt case which doubles as a part tray
- Tweezers
- Small amount of rust preventative/lubricant called tuf glide. It goes on as a thin liquid but dries to a dry lubricant which doesn't collect dust
- Small butane lighter for breaking down loctite
I want to add at least the 1/8" tool to this, but I might add the others. If you think of any other tools to add to this, please let me know!
7/32" for pliers right?
-
My bad, I believe you are correct.
-
BTW, I love your mobile nodding kit that you showed on your channel. Super capable set up.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login