The Hacked Leatherman Owners Club.
-
Here is the tool. Basic idea is you screw the female end of the post onto one end of this 1/8" rod that is pointed on one end. If you have ever worked on the Style or Squirt series you know that you can see light at the other side when assembling the tool, but all of the tools are off center stopping you from inserting the pivot. This typically leads to a very stressful assembly of prying and putting the tool in a vice. Ever since I first put one of these together I have been racking my brain trying to figure out a tool and this is what I have come up with. So once the post is screwed to the tool, you can get the pointed end into the hole of the tools, then you just push forward to align everything. Once the post is pulled through, you just unscrew the tool and you are done. Maybe Loki would be interested in making this tool for sale, I'm still trying to figure out how to manufacture one myself. What do you folks use to put these tools back together?

-
Great mod and pics, Waco

-
@4.19.93Waco said:
Here is the tool. Basic idea is you screw the female end of the post onto one end of this 1/8" rod that is pointed on one end. If you have ever worked on the Style or Squirt series you know that you can see light at the other side when assembling the tool, but all of the tools are off center stopping you from inserting the pivot. This typically leads to a very stressful assembly of prying and putting the tool in a vice. Ever since I first put one of these together I have been racking my brain trying to figure out a tool and this is what I have come up with. So once the post is screwed to the tool, you can get the pointed end into the hole of the tools, then you just push forward to align everything. Once the post is pulled through, you just unscrew the tool and you are done. Maybe Loki would be interested in making this tool for sale, I'm still trying to figure out how to manufacture one myself. What do you folks use to put these tools back together?
I've only taken a Style PS apart once, and that was enough. However, I have envisioned a similar tool (a tapered rod that threads into the female pivot post) for reassembling Original Waves. Their plier-tensioning springs seem to be much stiffer than those on the post-2004 Wave, and aligning the plier head and handle pivot holes requires keeping that spring compressed while the parts are aligned--which requires three hands, preferably of superhuman strength. If I had a tapered rod that I could force through the holes while pulling the pivot in behind it, that would eliminate the need for a vise and lots of swearing.I tend to use a worn-out, tapered sharpening rod as a combination of punch and aligning tool for multitool disassembly and reassembly.
-
I currently use a worn out sharpenig rod as well, but as I often use BO tools in my mods one slip means an ugly scratch along the tool, which is not ideal. I suppose you could do a set of several of these rods
1/8' for Style
7/64" for Wave Plier pivot
3/16" for Wave Tools
And whatever the Wingman uses, as I know those are also a pain to put back together due to spring tension.I'm working on putting a mobile modding kit together for all of the "Lego" (drop in) mods you can do on a Leatherman tool. These would make a great addition, but I am not sure how expensive they would be to produce.
The kit currently has the following
- 2 IFixIt drivers with all of the torx bits needed to take apart a Leatherman (I have the 5 star bit but they are in 1/4" instead of 4mm, I think I will grind them down to 4mm)
- IFixIt case which doubles as a part tray
- Tweezers
- Small amount of rust preventative/lubricant called tuf glide. It goes on as a thin liquid but dries to a dry lubricant which doesn't collect dust
- Small butane lighter for breaking down loctite
I want to add at least the 1/8" tool to this, but I might add the others. If you think of any other tools to add to this, please let me know!
-
Any comprehensive Leatherman modding kit needs a set of Loki's wrenches for Leatherman's proprietary screws. They make disassembly of the PST/PSTII, Blast/Fuse/Kick, Rebar, Bond, etc. much easier and less damaging than grabbing those screw heads with pliers.
-
Ah yes, I do have those in it but I forgot to list them.
-
@4.19.93Waco said:
I currently use a worn out sharpenig rod as well, but as I often use BO tools in my mods one slip means an ugly scratch along the tool, which is not ideal. I suppose you could do a set of several of these rods1/8' for Style
7/64" for Wave Plier pivot
3/16" for Wave Tools
And whatever the Wingman uses, as I know those are also a pain to put back together due to spring tension.I'm working on putting a mobile modding kit together for all of the "Lego" (drop in) mods you can do on a Leatherman tool. These would make a great addition, but I am not sure how expensive they would be to produce.
The kit currently has the following
- 2 IFixIt drivers with all of the torx bits needed to take apart a Leatherman (I have the 5 star bit but they are in 1/4" instead of 4mm, I think I will grind them down to 4mm)
- IFixIt case which doubles as a part tray
- Tweezers
- Small amount of rust preventative/lubricant called tuf glide. It goes on as a thin liquid but dries to a dry lubricant which doesn't collect dust
- Small butane lighter for breaking down loctite
I want to add at least the 1/8" tool to this, but I might add the others. If you think of any other tools to add to this, please let me know!
7/32" for pliers right?
-
My bad, I believe you are correct.
-
BTW, I love your mobile nodding kit that you showed on your channel. Super capable set up.
-
Thought I'd add some picks of my first Leatherman mod. Already done a couple of SAKs but wanted to do a Leatherman as well. Still work in progress. I started with a silver Leatherman Signal since any scratches are easy to buff out on the main body as opposed to the Cerakoted variants which show up really easily and are impossible to get rid of without re-coating. So far I've:
-
lopped off the hammer part since I won't use it... don't really want to use it as a hammer or use the carabiner clip... the can opener can be re-designed as bottle opener and the bit holder feature is redundant since there is already a bit holder elsewhere on the tool. This allows it to fit into a smaller nylon pouch and also save a bit of weight.
-
Replace the main blade with a S30V blade from a Leatherman Charge .... might design my own damascus blade at later date.
-
Replace the saw with scissors from a Wingman.
-
Re-design the whistle to house tweezers and toothpick instead of ferrocium rod. For this I trimmed down the whistle and cut the channels out of some old Victorinox scales, sandwiched these around a layer of 0.5mm G10 and very carefully shaped and polished.
-
Add a lanyard loop and a bead made from Resinivory, based on the design of a Playge bead.
Still lots to do eventually .... looking to re-design the awl and can opener ... possibly in damascus...... and still pondering the sharpening file although it does make quite a nice nail file ... possinly keep it and re-profile the end to make a nail cleaner??? Not sure.... any ideas??
-
-
An excellent bit of modding, Broog 8) :o

Great pics as well

Plus, welcome to


-
Cheers mate :D
-
Will post updates as soon as I have em.
-
Nice mod and welcome to the forum !

-
Latest update for my Leatherman Signal..... gonna convert the bit driver to a 4mm precision bit driver and have re-designed the pliers in CAD so I can have both made in Titanium ... should hopefully knock another ounce or so off the weight .... and its titanium mwahahahahaha :-) 8) :D 8) :D
Took a full day to do the CAD. And the tab on the hex tool is a blatant rip-off of a Playge bead. Sorry. Tool bits will be held in place with a bonded in magnet.
-
Cool :o can't wait to see the pieces after they are made



-
Latest updates....... titanium plier head ..... uses chopped down pivot from knife and saw. and I replaced the chopped down hammer head with an ABS rapid prototype (fits like a glove) which also uses the locking pin (replaced with threaded tube and 2 screws to retain a titanium lanyard hoop. All in all, weight is down to 160 grams from 212. Aiming for another 10 grams if possible.
next jobs are to
- redesign awl
- re-design can opener as a bottle opener and possibly box cutter in titanium .... almost done.
- Still waiting for titanium bit holder I sent to be rapid prototyped....... 1st model wasn't feasible.
-
@Broog said:
Latest updates....... titanium plier head ..... uses chopped down pivot from knife and saw. and I replaced the chopped down hammer head with an ABS rapid prototype (fits like a glove) which also uses the locking pin (replaced with threaded tube and 2 screws to retain a titanium lanyard hoop. All in all, weight is down to 160 grams from 212. Aiming for another 10 grams if possible.next jobs are to
- redesign awl
- re-design can opener as a bottle opener and possibly box cutter in titanium .... almost done.
- Still waiting for titanium bit holder I sent to be rapid prototyped....... 1st model wasn't feasible.
MY GOD! that plier head is amazing! would you consider selling a pair????
-
Very cool :o :ahhh

-
You might re-consider when you see how much titanium rapid prototypes cost...... I got mine printed at I-materialise. I've attached the stl file of the CAD if you want to make some yourself. If you have them made, you'll still need to make a pivot, find two .005" inch phosphor bronze washers (I use 1x .005 and 1x .010)...... ,and a belt sander to polish the edges. I had to slightly re-tension the fork spring to work with these (the spring in one side of the handle that expands to lock the main blade to prevent opening when using the pliers). Stiffness isn't bad but not as stiff as the original steel ones which means slightly more sideways play.
Ammendment .... wont let me post with STL attachment ..... if you want the STL file, let me know how to get it to you.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login