Show off your Sak mod's!
-
@hulk. said:
super mod, and explanation
The large blade and the combination tool do not rub?
in general the large blade has an asymmetric grind that's why I askMaybe slightly. I was dubious as to if it would fit without any major modification but… it does. As long as you notch the small blade spacer then it sits in their quite nicely.
-
adding a gutting blade and on the back of that may put a 58mm scissors, see what turns up in the future for this growing paper weight.
On the spring of the Pruning blade did you notch it out to stop the blade from hitting. i grind a notch out to get the blade low as i could, yours looks good well done. -
Cheers. No, completely standard blade, just the combo tool spacer got notched to accommodate the point of the blade.
Look forward to seeing the ongoing development of the monster…! -
I'm very tempted to make a Cadet X. I do have one 84mm with scissors (Climber Small) to harvest scissors from, but I wonder if the 85mm Wenger scissors might be a better choice

Also not sure what I need to get it done correctly (and put the Tourist back together).
-
@ComboTool said:
And second, my "Dutch flag" of alox mods. They are cadets with Wenger scissors, with backspring tools as well for two of them.MMMMMMmmmm, nice!
-
@Altis said:
I'm very tempted to make a Cadet X. I do have one 84mm with scissors (Climber Small) to harvest scissors from, but I wonder if the 85mm Wenger scissors might be a better choice
Also not sure what I need to get it done correctly (and put the Tourist back together).
Vic scissors are better (my opinion only) but the 85mm ones do stop you having to rip apart classic old 84s

That said if you want to go for it as I don’t think the climber small scissors have a back tool they should just go straight into the cadet X no fuss at all.
-
@Helvetica Bold said:
Vic scissors are better (my opinion only) but the 85mm ones do stop you having to rip apart classic old 84s
That said if you want to go for it as I don’t think the climber small scissors have a back tool they should just go straight into the cadet X no fuss at all.
That was my plan. The way I understand it is I need to drill out the Cadet's pins, add the scissors and backspring, then put in new brass rod pins, trim them and flatten the ends.
Am I missing anything? Never done it before and don't want to mess up :ahhh
-
That’s essentially it but if you use the 85mm scissors you will need the main blade spring from something like a recruit for it to sit on. You will also need to create a tensioner section from an old tool like a main blade that will sit on the other end of the spring to keep the tension up. Don’t have a pic unfortunately but there are threads on here covering it in more detail which show this.
You don’t have to drill the pins all the way out just the heads so you can tap them through with a thin nail or punch. Try to save the little collars so you can use them when making celador models - after you inevitably become addicted to modding.

So 84mm scissors easier but have to destroy an 84 with scissors
85mm scissors a bit more tricky but you don’t ;0)
Unusually peen one end of the pins first before building but others do both in situ so that’s just a preferences.
Good luck whichever way you go ;0)
-
@Helvetica Bold said:
That’s essentially it but if you use the 85mm scissors you will need the main blade spring from something like a recruit for it to sit on. You will also need to create a tensioner section from an old tool like a main blade that will sit on the other end of the spring to keep the tension up. Don’t have a pic unfortunately but there are threads on here covering it in more detail which show this.You don’t have to drill the pins all the way out just the heads so you can tap them through with a thin nail or punch. Try to save the little collars so you can use them when making celador models - after you inevitably become addicted to modding.

So 84mm scissors easier but have to destroy an 84 with scissors
85mm scissors a bit more tricky but you don’t ;0)
Unusually peen one end of the pins first before building but others do both in situ so that’s just a preferences.
Good luck whichever way you go ;0)
Thank you for the advice. I'm not sure how I could peen the pins before putting it together -- seems like it would be easier once the pins are in the
What are the size of brass rod I need for both the Cadet and the 84mm cellidor I need to put back together? It looks like only the cellidor use the collars while the alox are peened. I'm hoping the collars can be reused since I don't know where to get them. :ahhh
-
@Altis said:
Thank you for the advice. I'm not sure how I could peen the pins before putting it together -- seems like it would be easier once the pins are in theWhat are the size of brass rod I need for both the Cadet and the 84mm cellidor I need to put back together? It looks like only the cellidor use the collars while the alox are peened. I'm hoping the collars can be reused since I don't know where to get them. :ahhh
I wrap mine in leather to hold them in the vice but either way works. You’ll need 2.2mm round stock for all pins on an 84mm. Yep just the celador needs the collars. I believe you can actually get them from a chap in Germany on the ‘famous auctions site’ but if you can save them all the better ;0)
-
@Helvetica Bold said:
I wrap mine in leather to hold them in the vice but either way works. You’ll need 2.2mm round stock for all pins on an 84mm. Yep just the celador needs the collars. I believe you can actually get them from a chap in Germany on the ‘famous auctions site’ but if you can save them all the better ;0)Thanks

Estimated time for 2.2mm brass to Canada is up to 60 days :ahhh Seems like not an easy thing to get ahold of. 2.5mm and 3.0mm much easier.
-
thank you for you answer helvetica.
we can certainly adapt a large part of the garden range 8)
-
Old Böker mod. 182 Sportsman knife is one of most beautiful folding knives. I tried to mod a Victorinoy Ranger to look similar 😊. I choose model Ranger, because it has all the tools I need.
Spacers: Brass
Bolsters: New silver
Scales: Stag
Victorinox logo: cut and filed from alu scales 😊 -
That is straight up "outstanding"

-
@samek said:
Old Böker mod. 182 Sportsman knife is one of most beautiful folding knives. I tried to mod a Victorinoy Ranger to look similar 😊. I choose model Ranger, because it has all the tools I need.
Spacers: Brass
Bolsters: New silver
Scales: Stag
Victorinox logo: cut and filed from alu scales 😊I most certainly do.
Beautiful work. -
I was about to ask how you'd have recessed the back springs, then I remembered it is a Victorinox base, not a Wenger one

It looks stunning, really

-
@samek said:
Old Böker mod. 182 Sportsman knife is one of most beautiful folding knives. I tried to mod a Victorinoy Ranger to look similar 😊. I choose model Ranger, because it has all the tools I need.
Spacers: Brass
Bolsters: New silver
Scales: Stag
Victorinox logo: cut and filed from alu scales 😊That has some proper wow factor!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




