Show off your Sak mod's!
-
That’s essentially it but if you use the 85mm scissors you will need the main blade spring from something like a recruit for it to sit on. You will also need to create a tensioner section from an old tool like a main blade that will sit on the other end of the spring to keep the tension up. Don’t have a pic unfortunately but there are threads on here covering it in more detail which show this.
You don’t have to drill the pins all the way out just the heads so you can tap them through with a thin nail or punch. Try to save the little collars so you can use them when making celador models - after you inevitably become addicted to modding.

So 84mm scissors easier but have to destroy an 84 with scissors
85mm scissors a bit more tricky but you don’t ;0)
Unusually peen one end of the pins first before building but others do both in situ so that’s just a preferences.
Good luck whichever way you go ;0)
-
@Helvetica Bold said:
That’s essentially it but if you use the 85mm scissors you will need the main blade spring from something like a recruit for it to sit on. You will also need to create a tensioner section from an old tool like a main blade that will sit on the other end of the spring to keep the tension up. Don’t have a pic unfortunately but there are threads on here covering it in more detail which show this.You don’t have to drill the pins all the way out just the heads so you can tap them through with a thin nail or punch. Try to save the little collars so you can use them when making celador models - after you inevitably become addicted to modding.

So 84mm scissors easier but have to destroy an 84 with scissors
85mm scissors a bit more tricky but you don’t ;0)
Unusually peen one end of the pins first before building but others do both in situ so that’s just a preferences.
Good luck whichever way you go ;0)
Thank you for the advice. I'm not sure how I could peen the pins before putting it together -- seems like it would be easier once the pins are in the
What are the size of brass rod I need for both the Cadet and the 84mm cellidor I need to put back together? It looks like only the cellidor use the collars while the alox are peened. I'm hoping the collars can be reused since I don't know where to get them. :ahhh
-
@Altis said:
Thank you for the advice. I'm not sure how I could peen the pins before putting it together -- seems like it would be easier once the pins are in theWhat are the size of brass rod I need for both the Cadet and the 84mm cellidor I need to put back together? It looks like only the cellidor use the collars while the alox are peened. I'm hoping the collars can be reused since I don't know where to get them. :ahhh
I wrap mine in leather to hold them in the vice but either way works. You’ll need 2.2mm round stock for all pins on an 84mm. Yep just the celador needs the collars. I believe you can actually get them from a chap in Germany on the ‘famous auctions site’ but if you can save them all the better ;0)
-
@Helvetica Bold said:
I wrap mine in leather to hold them in the vice but either way works. You’ll need 2.2mm round stock for all pins on an 84mm. Yep just the celador needs the collars. I believe you can actually get them from a chap in Germany on the ‘famous auctions site’ but if you can save them all the better ;0)Thanks

Estimated time for 2.2mm brass to Canada is up to 60 days :ahhh Seems like not an easy thing to get ahold of. 2.5mm and 3.0mm much easier.
-
thank you for you answer helvetica.
we can certainly adapt a large part of the garden range 8)
-
Old Böker mod. 182 Sportsman knife is one of most beautiful folding knives. I tried to mod a Victorinoy Ranger to look similar 😊. I choose model Ranger, because it has all the tools I need.
Spacers: Brass
Bolsters: New silver
Scales: Stag
Victorinox logo: cut and filed from alu scales 😊 -
That is straight up "outstanding"

-
@samek said:
Old Böker mod. 182 Sportsman knife is one of most beautiful folding knives. I tried to mod a Victorinoy Ranger to look similar 😊. I choose model Ranger, because it has all the tools I need.
Spacers: Brass
Bolsters: New silver
Scales: Stag
Victorinox logo: cut and filed from alu scales 😊I most certainly do.
Beautiful work. -
I was about to ask how you'd have recessed the back springs, then I remembered it is a Victorinox base, not a Wenger one

It looks stunning, really

-
@samek said:
Old Böker mod. 182 Sportsman knife is one of most beautiful folding knives. I tried to mod a Victorinoy Ranger to look similar 😊. I choose model Ranger, because it has all the tools I need.
Spacers: Brass
Bolsters: New silver
Scales: Stag
Victorinox logo: cut and filed from alu scales 😊That has some proper wow factor!
-
-
Really beautiful!
[It's not failure if you learn something from it]
-
@Helvetica Bold said:
New slant on a pruner! 91mm garden knife using saw (everything needs to have a saw!) and the hawksbill blade from a pruning and grafting knife. The brass scales took the longest really as the blade slots in rather nicely. It has a 3.5mm pivot hole so I did make a collar to reduce it down from some tube I found on the ‘bay that was 3.5mm with a 2.5mm inner diameter - what are the chances!I also has to file a small nick in the combo tool spacer so the tip of the hawksbill didn’t clatter in to it.
I did use liners to keep the saw away from the scale and to provide the .4mm required to keep the main blade tight…yes it’s 2mm like a standard spearpoint.
I guess strictly you might put a small blade instead of the combo but I might carry this too and to be honest because the hawksbill has humped lines too this is one of the few scenarios I like the way the combo looks against the main blade.
Tough as old boots this.

I really must do some more dry fitting and see where my problem is because I found that the pruning blade wouldn't fit opposite another tool on a 111 mm knife.
-
Made this today.
.

-
-
100mm Hawksbill in a Trekker + Hook. Uses the liner lock for the Hawksbill. Retains all the other original tools aside from the OH serrated blade.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





