kamakiri's Former Lurker / New Member Intro (long read)
-
90mm ‘crab claw’ with a phillips?


And this wasn’t well received in the mod forum…so I thought I’d drop this here too. Figured out how to ‘cut‘ the rivet heads so that bushings, liners, and vintage scales go through disassembly without damage or perhaps less damage than by drilling. Still a work in progress…and that’s all I’m saying about it. Here are the pics of what I did yesterday and today.



-
Very interesting old knife KK - I guess there can't be many SAKs with that design of opener and the Phillips as the can-opener went out and Phillips came in round about the same time.
The pin removal technique sounds interesting - It's always a tricky job to do - Can you enlighten us some more on the approach pls?
-
@Huntsman said:
Very interesting old knife KK - I guess there can't be many SAKs with that design of opener and the Phillips as the can-opener went out and Phillips came in round about the same time.Yes, and not many are known in 90/91mm. Some doubt their existence. The big question is wether tge Phillips is from earlier than Victorinox’s records/estimate/published date or that the crab claws lasted longer.
The pin removal technique sounds interesting - It's always a tricky job to do - Can you enlighten us some more on the approach pls?
It’s a work in progress and everyone in the mod forum isn’t happy that I’m not providing more details.

It is letting me move forward with some projects I had on the back burner. Also tested the method on vintage ribbed Alox. Made this 111mm yesterday:

-
Took the parts from the OH blade donor for the above mod and put a 100mm hawksbill where the main blade was. Gonna be nice to have this blade with the liner lock. I’ve had too many instances of ‘good thing I was wearing gloves’ using it.
Everything works well, so I’ll be moving forward with the Workchamp version with both features OHO Slide lock and this style liner lock 100mm pruner ‘XS’ added.


-
Ugh. One of the projects I was working on ended in disappointment. Was reducing an Explorer to a Passenger but failed to notice that the main blade sits low and makes contact either the spacer and liner at the tip. Looked at pics before the tear-down from yesterday, and there it was…main blade sitting too low. :'(

-
Looks okay aside from that…
.


-
Can the main blade be slightly reshaped to fit the liners?
Sent from my SM-G991U using Tapatalk
-
Yes, reducing the tip by sharpening or reproducing another millimeter+ or so would make it clear. I took a bit off the corner of the round of the tang to help a bit. But it’s hard to work the material that way in an assembled knife. Still hangs low.
-
@kamakiri said:
Yes, reducing the tip by sharpening or reproducing another millimeter+ or so would make it clear. I took a bit off the corner of the round of the tang to help a bit. But it’s hard to work the material that way in an assembled knife. Still hangs low.Thanks for checking. Was this due to the donor? Is it easier to start with a Spartan and add the magnifier than to remove a layer from an Explorer?
Sent from my SM-G991U using Tapatalk
-
@GrouchoM said:
Thanks for checking. Was this due to the donor? Is it easier to start with a Spartan and add the magnifier than to remove a layer from an Explorer?Sent from my SM-G991U using Tapatalk
Yeah the original problem was with the donor. Unfortunately, it wouldn’t be easier for me to start with the spartan. The spartan would end up with shorter pins and likely mismatching parts. I was just distracted/excited/pleased when I took the scales off that they matched my date estimate for the knife exactly. The front scale is dated ‘98 and the back one ‘99. I just failed to double check everything before cleaning or tear down.


-
There was a ding on the mag bezel that I reduced somewhat.

-
👍
Sent from my SM-G991U using Tapatalk
-

Buttoned up a few mods today, but this one took the most work. Changed a few things from what I planned earlier. Liner lock works great and with the 111mm frame it’ll be a whole lot safer.It’s a Trekker with the 100mm hawksbill swapped plus a hook.

-
84mm Scissors with a Hook?

Internal/design pics in the mod forum in hulk’s thread here:
/post/2296650Still need to finish the cosmetic trimming and polishing, but the mechanics are 100% done.
In a nutshell:
No trimmed blades, tip sits inside alox scale profile.
No added or externally visible joints in backspring or tools.
Don’t break the scissor spring!!! Not serviceable without taking the knife apart.
Snap is insane. Avoiding the original pivot hole limits how close the new round of the tang can be. And I left over 1mm of material. Could go thinner, but didn’t.
Hook sits ~0.5mm proud. Reducing or eliminating this is possible, but lots of work and I wanted to see what could be done without modifying the hook itself.


-
Pics from fit testing



-
Processing the recent arrivals…
Found this one that needed a 1-minute fix.
The cool thing about the knife is that it’s c.’81 and has a stainless advertising inlay and a rare-ish back shield in nickel silver.

-
Speaking of nickel silver.
This smurfy plastic had to go…

-
Both projects from above

-
Not much knife time today. Punched these out and prepped some other stuff for 2.2mm pins.

-
Just a test fit…
Serrated Bantam X
74mm scissors
4 knives used for donor parts.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login